• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.6
• /
• pp.520-530
• /
• 2007

Combination of the parametric and the wavelet analyses of acoustic emission (AE) signals was applied to identify the failure modes in carbon fiber reinforced plastic (CFRP) composite laminates during tensile testing. AE signals detected by surface mounted lead-zirconate-titanate (PZT) and polyvinylidene fluoride (PVDF) sensors were analyzed by parametric analysis based on the time of occurrence which classifies AE signals corresponding to failure modes. The frequency band level-energy analysis can distinguish the dominant frequency band for each failure mode. It was observed that the same type of failure mechanism produced signals with different characteristics depending on the stacking sequences and the type of sensors. This indicates that the proposed method can identify the failure modes of the signals if the stacking sequences and the sensors used are known.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.2
• /
• pp.616-623
• /
• 1996

This paper investigates the linear stability of reacting mixing layers with special emphasis on the existence of multiple unstable modes. The governing equations for laminar flows are from two-dimensional compressible boundary-layer equations. The chemistry is a finite rate single step irreversible reaction with Arrhenius kinetics. For the incompressible reacintg mixing layer with variable density. A necessary condition for instability has been derived. The condition requires that the angular momentum, not the vorticity, to have a maximum in the flow domain. New inflectional modes of instability are found to exist in the outer part of the mixing layer. For the compressible reacting mixing layer, supersonic unstable modes may exist in the abscence of a generalized inflection point. The outer modes at high Mach numbers in the reacting mixing layer are continuations of the inflectional modes of low Mach number flows. However, the generalized inflection point is less important at supersonic flows.

• Journal of the Korean Data and Information Science Society
• /
• v.18 no.2
• /
• pp.481-488
• /
• 2007

The k-means algorithm is well known for its efficiency in clustering large data sets. However, working only on numeric values prohibits it from being used to cluster real world data containing categorical values. The k-modes algorithm is to extend the k-means paradigm to categorical domains. The algorithm requires a pre-setting or random selection of initial points (modes) of the clusters. This paper improved the problem of k-modes algorithm, using the Max-Min method that is a kind of methods to decide initial values in k-means algorithm. we introduce new similarity measures to deal with using the categorical data for clustering. We show that the mushroom data sets and soybean data sets tested with the proposed algorithm has shown a good performance for the two aspects(accuracy, run time).

• Asian Journal of Innovation and Policy
• /
• v.1 no.2
• /
• pp.219-239
• /
• 2012

In this age of convergence, a combinative nature of innovation is in need of revisiting. The innovation based on combination is named "combinative innovation" and defined operationally as the innovation that combines different modes of combinations. Five modes are characterized and the framework is applied to the case of CDMA mobile phone development of Samsung Electronics Company in the 1990s. The case study demonstrates the usefulness of the framework and the future direction of further elaboration of the framework.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.118-118
• /
• 2000

We investigate Frohlich-like electron--optical-phonon interactionsin uniaxial crytals based on the macroscopic dielectric continuum model. In general, the optical-phonon branches support mixed longitudinal and transverse modes due to the anisotropy. For heterostructures with double interfaces and superlattices, it is known that confined, interface, and half-space optical phonon modes exist in zincblende cystals. In uniaxial structures, additional propagating modes may exist in wurtzite heterosystems due to anisotropic phonon dispersion. This is especially the case when the dielectric properties of the adjacent heterostructure materials do not differ substantially. The dispersion relations and the interaction Hamiltonians for each of these modes are derived.

• ETRI Journal
• /
• v.32 no.2
• /
• pp.230-240
• /
• 2010

The IEEE802.16j standard uses non-transparent relay stations to extend coverage. There are two types of non-transparent relay modes, that is, the time-division transmit and receive (TTR) relay mode which can operate with one of two types of frame structures, a single-frame and multiframe structure, and the simultaneous transmit and receive (STR) relay mode. In this paper, we analyze the relay performance of TTR and STR relay modes in IEEE 802.16j MMR system. We also propose a fair resource allocation scheme for the downlink relay frame. Numerical results show that relay performance of the TTR with a single-frame or a multiframe structure and that of the STR relay modes are almost the same in a two-hop system. However, in a three-hop system, the TTR mode with a single-frame structure outperforms other relay modes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.137-137
• /
• 2000

The surface collective modes of thin K films deposited on Al(111) have been investigated using frequency dependent photoyield measurements and momentum resolved inelastic electron scattering. Jellium based theoretical calculations have predicted a richer set of features in the thin films than for the surface of a semi-infinite solid because there are th interference between two interfaces (substrate-film and film-vacuum) and heavy damping on the substrate. The use of an optical probe and electron scattering has allowed us to draw a more complete picture of the dynamic screening in thin films. The number, dispersion, damping and optical activity of the collective modes of the thin films have been measured as a function of K film thickness. New overlayer-induced excitations are observed : At qII=0, they correspond to the antisymmetric slab mode and the multipole surface plasmon. At finite qII=0, these modes undergo a transition towards the K multipole and monopole surface plasmons. With increasing coverage, the overlayer excitations turn into the collective modes of semi-infinite K. For a consistent interpretation of photoyield and electron energy loss spectra it is crucial to account for the non-analytic dispersion of the overlayer modes at small parallel wave vectors and for the finite angular resolution of the detector. The observed dispersions confirm predictions based on the time-dependent density functional approach.

• Journal of Distribution Science
• /
• v.16 no.1
• /
• pp.59-71
• /
• 2018

Purpose - Recognizing the importance of small and medium enterprises and venture enterprises for the domestic economy, the purpose of the present study is to select factor termed export modes from among various export success strategies and factors that can help those enterprises secure export competitiveness in the world market to analyze the effects of export modes on the amounts of exports and periods until export after the foundation of those enterprises. Research design, data, and methodology - A structured questionnaire was used as a tool to derive the purpose of the study, and a questionnaire survey was conducted using a mobile survey technique that facilitated the distribution of questionnaire sheets and the collection of results. The main methodology used is crossover analysis, and the regression analysis technique was applied to verify the study results derived, thereby securing the reliability and validity of the final results derived. Results - Small and medium venture enterprises with shorter periods of time until the first export success after establishment adopted direct export modes more frequently, and those enterprises with larger amounts of the first export after establishment adopted direct export modes more frequently. The results of quantitative analysis, indicating that 66.1% of those enterprises with an export amount exceeding one billion won adopted direct export modes, can be said to support the foregoing. The crossover analysis results derived as such were reanalyzed using the PPML regression analysis technique to quantitatively identify that the amounts of the first export of enterprises that adopted direct export modes were larger than those of enterprises that adopted indirect export modes by 120%. Conclusions - The present study implies differentiated values in three aspects. First, the present study investigated and presented the export success factors and strategies of small and medium venture enterprises in a total of 14 countries in the Asian region, European region, North American region, African region, and South American region. Second, it intensively investigated five export modes to identify and verify that they were affecting the export success of small and medium venture enterprises. Third, based on the results of the investigation, the present study presented two marketing implications in the pragmatic aspect.

• Journal of the Korean Society of Safety
• /
• v.31 no.2
• /
• pp.10-17
• /
• 2016

The purpose of this paper is to deduct components that are in the group of highest risk(top 10%). the group is conducted for classification into groups by values according to risk priority through risk priority number(RPN) of FMEA(Failure modes and effects analysis) sheet. Top 10% of failure mode among total potential failure modes(72 failure modes) of ESS included 5 BMS(battery included) failure modes, 1 invert failure mode, and 1 cable connectors failure mode in which BMS was highest. This is because ESS is connected to module, try, and lack in the battery part as an assembly of electronic information communication and is managed. BMS is mainly composed of the battery module and communication module. There is a junction box and numerous connectors that connect these two in which failure occurs most in the connector part and module itself. Finally, this paper proposes RPN by each step from the starting step of ESS design to installation and operation. Blackouts and electrical disasters can be prevented beforehand by managing and removing the deducted risk factors in prior.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.409-416
• /
• 2005

Design analysis for underground spaces requires evaluating stability related to tunnel collapses. A failure mode is one of the critical factors in the conventional methods of stability analysis. Therefore identification of failure modes is essential in securing safe construction in the phase of design analysis, instrumentation planning and implementation of reinforcing measures. In this study failure modes at the tunnel heading in granular soils are investigated using physical model tests and numerical simulation for various tunnel depths and ground surface inclinations. Test results indicated that the effect of depth and inclination of ground surface on a failure mode are significant. It is identified that, with an incase in depth, failure modes become localized in a region close to the tunnel. It is also known that an increase in the inclination of ground surface results in inclined and wide failure modes.