• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.1052-1060
• /
• 1989

본 연구에서는 0-방정식 난류모형과 2-방정식 난류모형 그리고 역압력 구배와 수렴과 발산의 영향을 고려한 2-방정식 난류모형을 사용하여 대칭단면에서의 난류유동 을 해석하고, 계산 결과를 비교하여 난류모형의 적절성을 평가하고자 한다.

• 대한조선학회논문집
• /
• 제45권6호
• /
• pp.631-636
• /
• 2008

In this paper, numerical analysis based on the RANS equation and the Realizable ${\kappa}-{\varepsilon}$ turbulence model is carried out for flows around an axisymmetric body at three Reynolds numbers($1.22{\times}10^7$, $1.0{\times}10^8$, $1.5{\times}10^8$) and the numerical results are compared with experiments data. Computed velocity distributions agree well with experiments as the Reynolds number increases. Pressure distributions agree well with the results of the potential flow except the tail region but differ from experiments for the parallel middle body as well as tail region. Pressure gradients show a good agreement with those of potential flow and experiment except the tail region. Friction coefficients show that the numerical results generally are lower than the experimental results estimated from the measured velocity. The difference of friction coefficients between the calculation and the experiment increases with growing of a boundary layer.

• 물과 미래
• /
• 제23권4호
• /
• pp.445-457
• /
• 1990

난류 및 부력효과가 강한 온배수 확산을 예측하기 위하여 난류모델을 이용한 수치모델의 개발이 두드러지고 있다. 본 연구는 정지수역으로 유입하는 온배수 수치모델을 개발하였다. Reynolds 응력항 및 난류 열 프럭스항의 처리를 위하여 k-$\varepsilon$난류모델에 온도자승유동항과 이의 감쇄율 전달방정식을 추가한 4-방정식 난류모델을 이용하였다. 지배방정식을 부분적인 포물형태의 전환을 통한 수치해석이 이용되었다. 계산결과는 Pande 등의 실험결과와 비교적 잘 일치하였고, McGuirk 등의 2-방정식 난류모델에 의한 해석결과와 비교분석하였다. 아울러 고리 원자력 1호기에의 적용을 통하여 본 모델의 실용성 및 타당성 입증하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.85-89
• /
• 1999

Numerical Analysis has been done for the supersonic off-design jet flow due to the pressure difference between the jet and the ambient fluid. The difference of pressure generates an oblique shock or an expansion wave at the nozzle exit, The waves reflect repeatedly at the center axis and on the sonic surface in the shear layer, and the pressure difference is resolved across these waves interacted with the turbulence mixing layer. In this paper, the axi-symmetric Navier-Stokes equation has been used with two equation $k-{\varepsilon}$ turbulence closure model. The second order TVD scheme with flux limiters, based on the flux vector split by the smooth eigenvalue split, has been used to capture internal shocks and other discontinuities. The correction term for the compressible flow and the damping function are used in the turbulence model. Numerical calculations have been done to analyze the off-design jet flow due to the pressure difference. The variation of pressure along the flow axis is compared with an experimental result and other numerical result. The characteristics of the interaction between the shock cell and the turbulence mixing layer have been analyzed.

• Journal of Mechanical Science and Technology
• /
• 제15권3호
• /
• pp.366-373
• /
• 2001

A numerical analysis of shock wave/boundary layer interaction in transonic/supersonic axial flow compressor cascade has been performed by using a characteristics upwind Navier-Stokes method with various turbulence models. Two equation turbulence models were applied to transonic/supersonic flows over a NACA 0012 airfoil. The results are superion to those from an algebraic turbulence model. High order TVD schemes predicted shock wave/boundary layer interactions reasonably well. However, the prediction of SWBLI depends more on turbulence models than high order schemes. In a supersonic axial flow cascade at M=1.59 and exit/inlet static pressure ratio of 2.21, k-$\omega$ and Shear Stress Transport (SST) models were numerically stables. However, the k-$\omega$ model predicted thicker shock waves in the flow passage. Losses due to shock/shock and shock/boundary layer interactions in transonic/supersonic compressor flowfields can be higher losses than viscous losses due to flow separation and viscous dissipation.

• 대한기계학회논문집B
• /
• 제27권12호
• /
• pp.1655-1666
• /
• 2003

It is experimentally well-known that high anisotropies of the turbulent flow field are dominant inside the tip leakage vortex, which is attributable to a substantial proportion of the total loss and constitutes one of the dominant mechanisms of the noise generation. This anisotropic nature of turbulence invalidates the use of the conventional isotropic eddy viscosity turbulence models based on the Boussinesq assumption. In this study, to check whether an anisotropic turbulence model is superior to the isotropic ones or not, the results obtained from the steady-state Reynolds averaged Navier-Stokes simulations based on the RNG k-$\varepsilon$ model and the Reynolds stress model (RSM) are compared with experimental data for two test cases: a linear compressor cascade and a forward-swept axial-flow fan. Through this comparative study of turbulence models, it is clearly shown that the RSM, which can express the production term and body-force term induced by system rotation without introducing any modeling, should be used to predict quantitatively the complex tip leakage flow, especially in the rotating environment.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.385-390
• /
• 2003

Shape of a multi-blades centrifugal fan is optimized by response surface method based on three-dimensional Navier-Stokes analysis. For numerical analysis, Reynolds-averaged Wavier-Stokes equations with standard $k-{\varepsilon}$ turbulence model are transformed into non-orthogonal curvilinear coordinate system, and are discretized with finite volume approximations. Due to the large number of blades in this centrifugal fan, the flow inside of the fan is regarded as steady flow by introducing the impeller force models for economic calculations. Optimizations with and without constraints are carried out. Design variables, location of cur off, radius of cut off, expansion angle of scroll and width of impeller were selected to optimize the shapes of scroll and blades. Data points for response evaluations were selected by D-optimal design, and linear programming method was used for the optimization on the response surface. As a main result of the optimization, the efficiency was successfully improved. The correlation of efficiency with relative size of inactive zone at the exit of impeller is discussed as well as with average momentum fluxes in the scroll.

• 대한기계학회논문집B
• /
• 제39권7호
• /
• pp.617-624
• /
• 2015

용존공기부상법이란 오염물에 미세기포를 부착하여 수표면으로 부상시킴으로써 이를 제거하는 수처리 방법이다. 본 연구에서는 난류모델에 따른 용존공기부상조 내부 유동해석의 변화를 고찰하기 위해 물과 기포의 혼합물에 대한 2상 유동을 모사하였다. 이때, 주어진 용존공기부상조 형상 및 조건에 대하여 다양한 난류모델에 따른 용존공기부상법 내부의 미세기포 분포량, 계산시간 및 수렴성 등을 비교하였으며, 그 결과 기존에 주로 사용되었던 표준 ${\kappa}-{\varepsilon}$ 모델이 타 난류모델과는 다른 거동을 예측하는 것으로 확인되었다.

• 대한기계학회논문집
• /
• 제17권9호
• /
• pp.2315-2328
• /
• 1993

The turbulence effect of particle deposition on a horizontal free-standing wafer in a vertical flow has been studied numerically by using the low-Reynolds-number k-.epsilon. turbulence model. For both the upper and lower surfaces of the wafer, predictions are made of the averaged particle deposition velocity and its radial distribution. Thus, it is now possible to obtain local information about the particle deposition on a free-standing wafer. The present result indicates that the particle deposition velocity on the lower surface of wafer is comparable to that on the upper one in the diffusion controlled deposition region in which the particle sizes are smaller than $0.1{\mu}m$. And it is found in this region that, compared to the laminar flow case, the averaged deposition velocity under the turbulent flow is about two times higher, and also that the local deposition velocity at the center of wafer is high equivalent to that the wafer edge.

• 한국항공우주학회지
• /
• 제33권5호
• /
• pp.1-8
• /
• 2005

아크히터의 작동특성을 예측하고 아크히터 자체의 설계와 해석을 위해, 세그먼트 아크히터(segmented arc-heater)의 내부 유동을 계산하였다. 지금까지 몇몇 연구자들이 아크히터 내부 유동을 수학적으로 모델링하여 일부 아크히터의 내부 유동을 정확하게 계산하는데 성공하였지만, 다양한 아크히터의 여러 운용 조건을 모두 만족하는 수학적 모델을 완성하지 못했다. 본 연구에서는 수학적 모델링의 범용성 확보를 위해, 아크 히터 내부의 난류 유동에 중점을 두었다. 기존의 대수 난류 모델을 대신하여 세 개의 2방정식 난류를 사용하였으며, 계산 결과 $k-\varepsilon$ 난류 모델이 아크히터 내부의 유동을 모사하는데 적합하다는 것을 확인했으며, 난류가 아크히터 유동을 특성을 좌우하는 중요한 요소 중에 하나라는 것을 밝혔다.