• 한국재료학회지
• /
• 제26권10호
• /
• pp.513-520
• /
• 2016

The effect of NaOH concentration on the properties of electrolytic plasma processing (EPP) coating formed on AZ61A Mg alloy is studied. Various types of EPP were employed on magnesium alloy AZ61A in a silicate bath with different concentrations of NaOH additive. Analysis of the composition and structure of the coating layers was carried out using an X-ray diffractometer (XRD) and a scanning electron microscope (SEM). The results showed that the oxide coating layer mainly consisted of MgO and $Mg_2SiO_4$; its porosity and thickness were highly dependent on the NaOH concentration. The Vickers hardness was over 900 HV for all the coatings. The oxide layer with 3 g/l of NaOH concentration exhibited the highest hardness value (1220 HV) and the lowest wear rate. Potentiodynamic testing of the 3 g/l NaOH concentration showed that this concentration had the highest corrosion resistance value of $2.04{\times}10^5{\Omega}cm^2$; however, the corrosion current density value of $5.80{\times}10^{-7}A/cm^2$ was the lowest such value.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.579-582
• /
• 2000

(R,S)-3-amino-n-butanoic acid에 대한 광학분할 능력이 우수한 균주 Alcaligenes denitrificans Y2k-2를 토양으로부터 분리하였다. 광학분할 반응에 관계하는 효소는 트랜스아미나제로 추정되며, 아민 수용체에 대한 특이성에서 크기가 작을수록 반응성이 높아지는 경향이 있다. pyruvate에 의한 기질저해 현상이 나타나는데, 효율적인 생산 체계를 갖추기 위해서 이 문제를 해결할 필요가 있으며 현재 효소의 정확한 특성을 파악하기 위한 실험을 진행 중이다.

• Korean Chemical Engineering Research
• /
• 제56권3호
• /
• pp.361-369
• /
• 2018

A manufacturing method has been devised to prepare novel heterogeneous cation exchange membranes by mixing ethylene vinyl acetate (EVA) copolymers with a commercial cation exchange resin. Optimum material characteristics, mixture ratios and manufacturing conditions have been worked out for achieving favorable membrane performance. Ion exchange capacity, electrical resistance, water uptake, swelling ratio and tensile strength properties were measured. SEM analysis was used to monitor morphology. Effects of vinyl acetate (VA) content, melt index (MI) and ion exchange resin content on properties of heterogeneous cation exchange membranes have been discussed. An application test was carried out by mounting a selected membrane in a membrane capacitive deionization (MCDI) system to investigate its desalination capability. 0.92 meq/g of ion exchange capacity, $8.7{\Omega}.cm^2$ of electrical resistance, $40kgf/cm^2$ of tensile strength, 19% of swelling ratio, 42% of water uptake, and 56.4% salt removal rate were achieved at best. VA content plays a leading role on the extent of physical properties and performance; however, MI is important for having uniform distribution of resin grains and achieving better ionic conductivity. Overall, manufacturing cost has been suppressed to 5-10% of that of homogeneous ion exchange membranes.

• 한국수소및신에너지학회논문집
• /
• 제19권6호
• /
• pp.529-536
• /
• 2008

Cyanobacteria Synechocystis PCC 6803 or the extracted thylakoid membrane from this strain was appled to photosynthetic bio-electrochemical fuel cell(PBEFC) for the production of hydrogen under the illumination of 48Klux using halogen lamp. PBEFC was composed of anode, cathode and membrane between them. Electrode material was carbon paper while electron mediator and receptor were added phenazine methosulfate(PMS) and potassium ferricyanide respectively. When water and 50 mM tricine buffer and $300{\mu}M$ PMS were added to the anode under the light condition, PBEFC produced the current density $4.4{\times}10^{-5}\;mA/cm^2$, $1.4{\times}10^{-4}\;mA/cm^2$ and $2.4{\times}10^{-4}\;mA/cm^2$, respectively. And the addition of the thylakoid membrane to the system increased current density to $1.3{\times}10^{-3}\;mA/cm^2$. Two times increase of the thylakoid membrane into the anode doubled the current density to $2.6{\times}10^{-3}\;mA/cm^2$. But the current density was not increased proportionally to the amount of thylakoid membrane increased. The system was unstable to measure the electricity output due to the foam production in the anode. Addition of triton X-100 and tween 80 stabilized the system to measure the electricity output but the current density was not increased higher than $8.4{\times}10^{-4}\;mA/cm^2$ and $2.3{\times}10^{-3}\;mA/cm^2$. When the thylakoid membrane was substituted to Synechocystis PCC 6803 cells of four-day culture which has chlorophyll contents $20.5{\mu}g/m{\ell}$, maximum current density was $1.3{\times}10^{-3}\;mA/cm^2$ with $1\;k{\Omega}$ resistance.

• Transactions on Electrical and Electronic Materials
• /
• 제18권5호
• /
• pp.261-264
• /
• 2017

$Ni_{0.79}Co_{0.15-x}Cu_xMn_{2.06}O_4$ ($0{\leq}x{\leq}0.09$) thick films were fabricated using the conventional solid-state reaction method and screen-printing method. Structural and electrical properties of specimens based on the amount of Cu were observed in order to investigate their applicability in the infrared detector. All specimens showed a single spinel phase with a homogeneous cubic structure. As the amount of Cu increased, the average grain size increased and was found to be approximately $5.01{\mu}m$ for the $Ni_{0.79}Co_{0.06}Cu_{0.09}Mn_{2.06}O_4$ specimen. The thickness of all specimens was approximately $55{\sim}56{\mu}m$. As Cu content increased, the resistivity and TCR properties at room temperature decreased, and these values for the $Ni_{0.79}Co_{0.06}Cu_{0.09}Mn_{2.06}O_4$ specimen were $502{\Omega}-cm$ and $-3.32%/^{\circ}C$, respectively. The responsivity and noise properties decreased with an increase in Cu content, with the specimen with a Cu content of x=0.09 showing 0.0183 V/W and $5.21{\times}10^{-5}V$, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1260-1261
• /
• 2008

Aluminium doped zinc oxide (ZnO:Al) thin film has emerged as one of the most promising transparent conducting electrode in flat panel displays(FPD) and in photovoltaic devices since it is inexpensive, mechanically stable, and highly resistant to deoxidation. In this paper ZnO:Al thin film was deposited on the polyethylene terephthalate(PET) substrate by the capacitively coupled r.f. magnetron sputtering method. Wide ranges of bias voltage, -30V${\sim}$45V, was applied to the growing films as an additional energy instead of substrate heating, and the effect of positive and negative bias on the film structure and electrical properties of ZnO:Al films was studied and discussed. The results showed that a bias applied to the substrate during sputtering contributed to the improvement of electrical properties of the film by attracting ions and electrons in the plasma to bombard the growing films. These bombardments provided additional energy to the growing ZnO film on the substrate, resulting in significant variations in film structure and electrical properties. The film deposited on the PET substrate at r. f. discharge power of 200 W showed the minimum resistivity of about $2.4{\times}10^{-3}{\Omega}-cm$ and a transmittance of about 87%.

• 한국조경학회지
• /
• 제33권6호
• /
• pp.78-89
• /
• 2006

This study was conducted to analyze the planting structure and ecological characteristics of greon spaces on the grounds of e Dangjin steam power plant. To achieve these goals, we surveyed existing vegetation, plant community structure, Plant volume and growth rate. Based on e vegetation analysis, existing vegetation was classified into six types: herbaceous species $(70.54\%)$, evergreen coniferous trees $(21.17\%)$, deciduous broad-leaved trees $(5.10\%)$, deciduous coniferous trees $(1.47\%)$, shrubs $(0.12\%)$, and other types $(1.59\%)$. The coal storage, office, and playground areas were community is the natural forest area where a Pinus thunbergii / Pinus densiflora community is distributed in terms of vegetation structure, species diversity, plant volume, and growth rate. The artificial green spaces(near the coal storage, office, playground areas) had a single-layer structure. Species diversity indices of the artificial green areas were $0.1655\~0.4807$ compared to 0.8628 in the natural forest, which presented a good growth environment. Also, the plant volume in the artificial green space was lower than that of the natural green space. Therefore, it would be desirable to develope a multi-layer structure similar to that of the vegetation in the natural green space in order to improve the amount of plant volume. The plant-damage ratio of Pinus thunbergii was $52.48\%$ in the coal storage area, and $8.48\~ 11.52\%$, in the other survey areas. Also, the vitality of Pinus thunbergii was $15.45k{\Omega}$ in the coal storage areas, which indicates bad growing conditions. This suggests that soil characteristics and dust have a bad impact on growth. The investigation into deciduous tres' growth status showed that appropriate plants would be Albizzia julibrissin, Acer palmatum var. sanguineum, Acer palmatum, Malus spp., Prunus sargentii.

• Wind and Structures
• /
• 제27권2호
• /
• pp.101-109
• /
• 2018

Wall jet flow exists widely in engineering applications, including the simulation of thunderstorm downburst outflows, and has been investigated extensively by both experimental and numerical methods. Most previous studies focused on the scaling laws and self-similarity, while the effect of lip thickness and external stream height on mean velocity has not been examined in detail. The present work is a numerical study, using steady Reynolds-Averaged Navier Stokes (RANS) simulations at a Reynolds number of $3.5{\times}10^4$, of a turbulent plane wall jet with an external stream to investigate the influence of the wall jet domain on downstream development of the flow. The comparisons of flow characteristics simulated by the Reynolds stress turbulence model closure (Stress-omega, SWRSM) and experimental results indicate that this model may be considered reasonable for simulating the wall jet. The confined wall jet is further analyzed in a parametric study, with the results compared to the experimental data. The results indicate that the height and the width of the wind tunnel and the lip thickness of the jet nozzle have a great effect on the wall jet development. The top plate of the tunnel does not confine the development of the wall jet within 200b of the nozzle when the height of the tunnel is more than 40b (b is the height of jet nozzle). The features of the centerline flow in the mid plane of the 3D numerical model are close to those of the 2D simulated plane wall jet when the width of the tunnel is more than 20b.

• Journal of Microbiology and Biotechnology
• /
• 제9권5호
• /
• pp.687-690
• /
• 1999

Bacillus stearothermophilus No. 236 isolated from the soil is a strong xylan degrader producing all the xylanolytic enzymes. However, the strain was discovered to be highly intractable to its transformation. In the present study, we have developed a reliable method for transformation of B. stearothermophilus No. 236 by a systematic examination of several factors which might have an influence on the efficiency of electrotransformation. Notably, we found that the most critical factor influencing the transformation efficiency (TE) was the incubation temperature after pulsing, with its optimum incubation of $37^{\circ}C.\; At\; 50^{\circ}C$, the optimum growth temperature of the B. stearothermophilus strain, the transformants could not be obtained at a recognizable level. The combination of field strength of 7.5 kV/cm along with pulse duration of 10 msec (resistance of $400{\Omega}\; and\; capacitance\; of\; 25{\mu}F$) was shown to be the best electrical parameters at the incubation temperature of $37^{\circ}$. A higher TE was obtained when the cells were harvested at an early-exponential phase. Twenty percent of PEG-8000 in a suspension buffer and an addition of 0.1% glycine in the growth medium resulted in about 4-fold and 3-fold increases in TE, respectively. We also found that the plasmid DNA which had been cycled through the host B. stearothermophilus cells enhanced TE by one order of magnitude higher. Under the presently described conditions, $2.5{\times}10^{5} transformants per ${\mu}g$ DNA was attained.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.257.1-257.1
• /
• 2014

We investigated characteristics of ITO/Ag-Pd-Cu (APC)/ITO multilayer electrodes prepared by direct current magnetron sputtering for use as an anode in organic solar cells (OSCs). To optimize electrical properties of ITO/APC/ITO multilayer, we fabricated the ITO/APC/ITO multilayer at a fixed ITO thickness of 30 nm as a function of APC thickness. Compare to the surface of Ag layer on ITO, the APC had a smooth surface morphology. At optimized APC thickness of 12 nm, the ITO/APC/ITO multilayer exhibited a sheet resistance of $6{\Omega}/square$ and optical transmittance of 84.15% at a wavelength of 550 nm which is comparable to conventional ITO/Ag/ITO multilayer. However, the APC-based ITO multilayer showed a higher average transmittance in a visible region than the Ag-based ITO multilayer. The higher average transmittance of ITO/APC/ITO multilayer indicated the multilayer is suitable anode for organic solar cells with P3HT:PCBM active layer. OSCs fabricated on the optimized ITO/ACP/ITO multilayer exhibited a better performance with a fill factor of 64.815%, a short circuit current of $8.107mA/cm^2$, an open circuit voltage of 0.59 V, and power conversion efficiency (3.101%) than OSC with ITO/Ag/ITO multilayer (2.8%).