• International Journal of Concrete Structures and Materials
• /
• 제7권4호
• /
• pp.265-271
• /
• 2013

Prestressed concrete cylindrical pipe (PCCP) has been widely used for the distribution of water in communal, industrial, and agricultural systems for a long time. However, as it deteriorates, structural failures have been experienced. Replacing the entire existing PCCP with partial damages is not an economical method. Currently, as a cost effective repairing method, a new approach using fiber reinforced polymer (FRP) has been applied. A new design procedure of this method was proposed considering various kinds of loading condition. However, it is not easy to apply this method for design purpose due to its complex procedures. The objective of this study is to provide a new design criteria and process for PCCP rehabilitation with FRP. Through this method, the appropriate quantities of FRP layers will be decided after examining of limit states of deteriorated PCCP. For this purpose, two deterioration conditions are assumed; fully deteriorated and partially deteriorated. Different limit states for each case are applied to decide the quantities of attached FRP. The concept of "margin of safety" is used to judge whether the design results are within the optimal ranges to satisfy all limit states.

• 한국멀티미디어학회논문지
• /
• 제12권6호
• /
• pp.804-814
• /
• 2009

In this paper, a novel system for avatar motion controlling by tracking face is presented. The system is composed of three main parts: firstly, LCS (Local Cluster Searching) method based face feature detection algorithm, secondly, HMM based feature points recognition algorithm, and finally, avatar controlling and animation generation algorithm. In LCS method, face region can be divided into many small piece regions in horizontal and vertical direction. Then the method will judge each cross point that if it is an object point, edge point or the background point. The HMM method will distinguish the mouth, eyes, nose etc. from these feature points. Based on the detected facial feature points, the 3D avatar is controlled by two ways: avatar orientation and animation, the avatar orientation controlling information can be acquired by analyzing facial geometric information; avatar animation can be generated from the face feature points smoothly. And finally for evaluating performance of the developed system, we implement the system on Window XP OS, the results show that the system can have an excellent performance.

• 한국항만학회지
• /
• 제14권1호
• /
• pp.115-124
• /
• 2000

This study is a suggest a measurement method of lateral displacement, which can be used to judge the stability of bridge abutment on soil undergoing lateral movement. The abutment of bridge on soft foundation makes lateral movement due to the settlement of back fill and lateral flow. To measure the displacement of such a abutment, there are a lot of indirect method for measurement such as survey of leveling or inclinometer gauge around the abutment. But all of them are not sufficient to confirm the ground behavior and measure the exact lateral behavior of structure. As making the structure and pile cooperatively by measuring the movement of lateral displacement, for measuring the abutment displacement precisely by using the inclinometer. In this work, we try to suggest efficient measuring method of abutment displacement and its application.

• Journal of information and communication convergence engineering
• /
• 제9권5호
• /
• pp.545-550
• /
• 2011

Trilateration is a typical method to locate an object, which requires inherently at least three prerecognized reference points. In some cases, owing to out of reachability to communication facilities the target node cannot be reachable always to three base stations. This paper presents a predictive method, which can identify the location of a moving target node in real time even though the target node could not get in touch with all three base stations. The method is based on the PIDcontrolled Moving Objects Spatio-Temporal Model Algorithm. Simulation results verify that this method can predict the moving direction of a moving target, and then combine with its past position information to judge accurately the location.

• 설비공학논문집
• /
• 제26권9호
• /
• pp.434-440
• /
• 2014

Experiments were performed to verify if performance and characteristic curves obtained from the temperature differential defrosting method, where surface temperature is measured to judge defrosting condition, can be reproduced by the photoelectric technology where defrosting condition is judged by photoelectric sensors. The output voltage of a phototransistor and heating capacity, power consumption, and surface temperature of the outdoor heat exchanger are compared. The results showed that the photoelectric sensors can be used as a defrost control device. On-off control timings in temperature differential defrosting method are in good agreement with those predicted by the high and low threshold output voltages of the photoelectric sensor.

• 한국안전학회지
• /
• 제15권4호
• /
• pp.134-138
• /
• 2000

Signal words such as DANGER, WARNING, CAUTION, etc. have been used in order to transmit a potential hazard easily and quickly. But they were applied to a number of the sites without consistency. Thus, this study took Quantification Method and Cluster Analysis in order to judge the signal words corresponding to the urgency of situations, and to analyze whether signal words are used properly or not. According to the result of Quantification Method II signal words were most affected by Understanding, Severity and Likelihood in both student group and industrial worker group. And in Quantification Method III CAUTION corresponded to Immediacy and Understanding whereas NOTICE did to Receptivity, WARNING, DEADLY and DANCER did to Likelihood, Dangerousness and Severity. Finally, Cluster Analysis showed that CAUTION and NOTICE were recognized as similar words.

• 환경영향평가
• /
• 제15권1호
• /
• pp.35-43
• /
• 2006

The eutrophication in lakes is caused by the inflow of excessive nitrogen and phosphorus, which are not only pollutants to reduce the value of water resource but also nutrients for algae growth that debases water quality. Several methods have been used to judge the eutrophication grades of lakes, but the judgment results can be different with one another even under same coditions because each method is different in judgment items and their standards. A method for overcoming the problem with the judgment of eutrophication grades is, therefore, developed in this study with the application of fuzzy theory. This method allows decision makers to represent the uncertainties (differences) of results by the existing judgment methods and also incorporate associated uncertainties directly into the judgment process, so the judgment results can be made that are more realistic and consistent than those made without taking uncertainty in account.

• 산업경영시스템학회지
• /
• 제22권49호
• /
• pp.143-152
• /
• 1999

The competitive advantage of technologies is required for survival of enterprises in the social environments which change rapidly. So the strategy of technology development becomes more and more important. For the establishment of strategy, the situational analysis and the forecasting analysis are executed and they include the technology assessment and the technology forecasting. This research is intended to find out the problems and the difficulties in the current Matrix Method, and to improve the method, finally to help the R&D departments of enterprises applying the method. The suggested matrix(TSM : Technology Shift Matrix) method is designed so that one can judge the current situation of technology and future trend, by moving the matrix which is placed to the upside of the basic matrix.

• ETRI Journal
• /
• 제18권1호
• /
• pp.29-41
• /
• 1996

This paper describes a method to select a suitable feature for speech recognition using information theoretic measure. Conventional speech recognition systems heuristically choose a portion of frequency components, cepstrum, mel-cepstrum, energy, and their time differences of speech waveforms as their speech features. However, these systems never have good performance if the selected features are not suitable for speech recognition. Since the recognition rate is the only performance measure of speech recognition system, it is hard to judge how suitable the selected feature is. To solve this problem, it is essential to analyze the feature itself, and measure how good the feature itself is. Good speech features should contain all of the class-related information and as small amount of the class-irrelevant variation as possible. In this paper, we suggest a method to measure the class-related information and the amount of the class-irrelevant variation based on the Shannon's information theory. Using this method, we compare the mel-scaled FFT, cepstrum, mel-cepstrum, and wavelet features of the TIMIT speech data. The result shows that, among these features, the mel-scaled FFT is the best feature for speech recognition based on the proposed measure.

• Journal of information and communication convergence engineering
• /
• 제9권3호
• /
• pp.336-340
• /
• 2011

Many approaches to image restoration are aimed at removing either gauss or impulse noise. This is because both types of degradation processes are distinct in nature, and hence they are easier to manage when considered separately. Nevertheless, it is possible to find them operating on the same image, which produces a hard damage. This happens when an image, already contaminated by Gaussian noise in the image acquisition procedure, undergoes impulsive corruption during its digital transmission. Here we proposed an algorithm first judge the type of the noise according to the difference values of pixel's neighborhood region and impulse noise's characteristic. Then removes the gauss noise by modified weighted mean filter and removes the impulse noise by modified nonlinear filter. The result of computer simulation on test images indicates that the proposed method is superior to traditional filtering algorithms. The proposed method can not only remove mixed noise effectively, but also preserve image details.