DOI QR코드

DOI QR Code

Retrofit Design of Damaged Prestressed Concrete Cylinder Pipes

  • Received : 2013.04.27
  • Accepted : 2013.09.18
  • Published : 2013.12.30

Abstract

Prestressed concrete cylindrical pipe (PCCP) has been widely used for the distribution of water in communal, industrial, and agricultural systems for a long time. However, as it deteriorates, structural failures have been experienced. Replacing the entire existing PCCP with partial damages is not an economical method. Currently, as a cost effective repairing method, a new approach using fiber reinforced polymer (FRP) has been applied. A new design procedure of this method was proposed considering various kinds of loading condition. However, it is not easy to apply this method for design purpose due to its complex procedures. The objective of this study is to provide a new design criteria and process for PCCP rehabilitation with FRP. Through this method, the appropriate quantities of FRP layers will be decided after examining of limit states of deteriorated PCCP. For this purpose, two deterioration conditions are assumed; fully deteriorated and partially deteriorated. Different limit states for each case are applied to decide the quantities of attached FRP. The concept of "margin of safety" is used to judge whether the design results are within the optimal ranges to satisfy all limit states.

Keywords

References

  1. American Concrete Institute. (2001). ACI 224R-01 control of cracking in concrete structures. Farmington Hills, MI: ACI.
  2. American Concrete Institute. (2008a). ACI 318 building code requirements for concrete and commentary. Farmington Hills, MI: ACI.
  3. American Concrete Institute. (2008b). ACI 440.2R-08 guide for the design and construction of externally bonded FRP system for strengthening concrete structures. Farmington Hills, MI: ACI.
  4. American Society of Civil Engineers. (2005). ASCE 7-05 minimum design loads for building and other structures. Reston, VA: ASCE.
  5. American Water Works Association. (2005). AWWA M45 fiberglass pipe design, manual of water supply practices. Denver, CO: AWWA.
  6. American Water Works Association. (2007a). Design of prestressed concrete cylinder pipe. Denver, CO: AWWA.
  7. American Water Works Association. (2007b). Prestressed concrete pressure pipe, steel-cylinder type. Denver, CO: AWWA.
  8. Fortner, B. (1999). Main line mending. Civil Engineering, 69, 25-42.
  9. Heger, F. J., Zarghamee, M. S., & Dana, W. R. (1990). Limitstates design of prestressed concrete pipe. I: CRITERIA. Journal of Structural Engineering, 116, 2083-2104. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:8(2083)
  10. Howard, A. K. (1977). Modulus of soil reaction values for buried flexible pipe. Journal of the Geotechnical Engineering Division, ASCE, 103, 33-43.
  11. Howard, A. (1996). Pipeline installation. Lakewood, CO: Relativity Publishing.
  12. Howard, A. K., Kinney, L. A., Jr., & Fuerst, R. P. (1995). Prediction of flexible pipe deflection. Denver, CO: U.S. Bureau of Reclamation.
  13. Lee, D. C. (2002). Rehabilitation of large diameter PCCP with composites. San Diego, CA: University of California.
  14. Lee, Y. (2011). Analysis of prestressed concrete cylinder pipes for rehabilitation. Irvine, CA: University of California.
  15. McReynolds, M. (1999). An innovative solution for the repair of the sepulveda feeder. In International Public Works Congress and Exposition. American Public Works Association.
  16. Omara, A. M., Guice, L. K., Straughan, W. T., & Akl, F. A. (1997). Buckling of thin circular pipes encased in rigid cavity. Journal of Engineering Mechanics, 123, 1294-1301. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:12(1294)
  17. Spangler, M. G. (1941). The structural design of flexible pipe culverts. Ames, IA: Iowa State Engineering Experiment Station Bulletin.
  18. Spangler, M. G., & Handy, R. L. (1982). Soil engineering. New York, NY: Harper & Row.
  19. Teng, J. G., Lu, X. Z., & Ye, L. P. (2004). Recent research on intermediate crack induced debonding in FRP strengthened beams. In Proceedings of the 4th International Conference on Advanced Composite Materials for Bridges and Structures. Calgary, Canada.
  20. Teng, J. G., Smith, S. T., & Chen, J. F. (2001). Intermediate crack induced debonding in RC beams and slabs. Construction and Building Materials, 17, 447-462.
  21. Watkins, R. K.,&Spangler,M.G. (1958). Some characteristics of the modulus of passive resistance of soil: A study of similitude. Highway Research Board Proceedings, 37, 576-583.
  22. Zarghamee, M. S. (1988a). Experimental evaluation of design methods for prestressed concrete pipe. Journal of Transportation Engineering, ASCE, 114, 635-655. https://doi.org/10.1061/(ASCE)0733-947X(1988)114:6(635)
  23. Zarghamee, M. S. (1988b). A multilayered model for analysis of composite pipes. In Bruce A. Bennett (Ed.), Pipeline Infrastructure (pp. 136-147). New York, NY: ASCE.
  24. Zarghamee, M. S. (1988c). Predicting prestress losses in prestressed concrete pipe. Concrete International, 10, 59-64.
  25. Zarghamee, M. S., & Fok, K. L. (1990). Analysis of prestressed concrete pipe under combined loads. Journal of Structural Engineering, 116, 1734-1742. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:6(1734)
  26. Zarghamee, M., Ojdrovic, R., & Fongemie, R. (1998). Condition assessment and repair of prestressed concrete pipelines. In Pipeline Division Conference (pp. 703-713).

Cited by

  1. Concrete Pipes Reinforced with AL2O3 Nanoparticles Considering Agglomeration: Magneto-Thermo-Mechanical Stress Analysis vol.16, pp.3, 2013, https://doi.org/10.1007/s40999-016-0130-2
  2. Experimental and numerical study on CFRP-lined prestressed concrete cylinder pipe under internal pressure vol.190, pp.None, 2013, https://doi.org/10.1016/j.engstruct.2019.03.106
  3. Dynamic Response of Buried Pipelines Retrofitted with Concrete Canvas Panels Under Blast Loading vol.44, pp.suppl1, 2020, https://doi.org/10.1007/s40996-020-00392-y
  4. Evaluation of Prospective Use of Existed CFRP-Strengthened Concrete Pipes in Forest Areas: Assessment of Their Structural Stability and Possible Re-Use vol.13, pp.9, 2013, https://doi.org/10.3390/su13094947