• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.735-737
• /
• 2004

This paper proposes a method of fault diagnostics on switching mode power supply. When the error of switching mode power supply cannot be found when the conventional diagnostics is performed, this proposed method first performs diagnosis on the switching mode power supply strictly to judge the operating condition. This method analyzes the PWM wave which depends on the load change, to make sure the feedback control of the power supply to diagnosis the operation of the power supply system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.3
• /
• pp.429-436
• /
• 2008

Nowadays fires must be detected rapidly Abstract, and by connecting the detector's distribution, sender, transponder, receiver and others can be connected. Mechanical systems are implemented in today's buildings. However, this kind of constructing method has some disadvantages, that is, if fire happens somewhere, we cannot judge where the fires happen, and it is also difficult to judge what extent the fires reach. In order to overcome the disadvantages, in this paper, according to the tendency of combining the Ubiquitous and Intelligent Network, we propose a type of system by using the method of comparing the differences of the existed systems. The proposed system is designed to perceive the fires rapidly and confirm the fire place and fire scale correctly.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.3
• /
• pp.564-579
• /
• 2013

The purpose of Maritime Safety Tribunal is that experts about ship operation investigate and reveal causes of marine disasters and suggest plans to prevent recurrence in Korean Maritime Safety Tribunal which is a kind of administrative court. Despite the fact that 72% of marine disasters is fishing vessel accidents and 75% of collision accidents between vessels which most occur is related to fishing boats, it is the very serious problem that there is no any person with licenses of marine technicians for fishing vessels in judges and investigators of Korean Maritime Safety Tribunal. The operational characteristics of fishing vessels, their sizes, and shift patterns of duties in wheelhouses are completely and incommensurably different from those of merchant vessels. By the way, if the investigators and judges who just consist of merchant vessel experts investigate and judge marine accidents about fishing vessels, there could be errors in establishment of policies to investigate and reveal their causes and prevent recurrence of accidents. Especially, in case of collision accidents between fishing vessels and merchant vessels, it is thought that the marine accident interested provides causes which can be doubtful about fairness of judges. Therefore, it is thought that the ratio of judges and investigators is most desirable to compose it to be similar to the occurrence frequency of marine accidents. For this, the following solution plans are suggested. First, qualification for appointment requires first class marine technicians. But there is the only one vessel which needs the first class in fishing vessels. Therefore, it is thought that the provisory clause should be added so that the second class marine technicians can be used instead of the first class ones. Second, the marine accidents of fishing vessels reach 72% but the fact that there is no any judge and investigator with licenses of marine technicians for fishing vessels is thought to go against the purpose of establishment of Korean Maritime Safety Tribunal. Therefore, it is thought that there is, at least, one more judges and investigators in the central and local Korean Maritime Safety Tribunals. The same method should be applied to judge assistants and investigation assistants.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.1
• /
• pp.63-70
• /
• 2013

A judgment on the redevelopment projects' predicted profitability is an essential decision-making element for the success of the redevelopment projects. It is necessary to review the literature on profitability of redevelopment project and draw risk factors that could affect profitability through the risk analysis based on surveys. It is also necessary to judge profitability prediction toward the business value of the redevelopment project in the planning phase according to the risk analysis results which can affect the profitability prediction. In order to prevent the growing difficulties in executing the projects, a profitability prediction model is proposed using the method of management and disposal based on a proportional calculation that can estimate the share of expenses in order to judge profitability in the planning phase. With the improvement of profitability prediction models, it is possible to appropriately judge profitability in the planning phase in order to allow the prevention of suspension, reduction of project term, reduction of cost, and making of rational decisions.

• Journal of Power Electronics
• /
• v.19 no.3
• /
• pp.655-664
• /
• 2019

In order to analyze the nonlinear phenomena of the bifurcation and chaos caused by the switching of nonlinear switching devices in inductively coupled power transfer (ICPT) systems, a Jacobian matrix model, based on discrete mapping numerical modeling, is established to judge the system stability of the periodic closed orbit and to study the nonlinear behavior of Hopf bifurcation in a system under full resonance. The general flow of the parameter design, based on the stability principle for ICPT systems, is proposed to avoid the chaos and bifurcation phenomena caused by unreasonable parameter selection. Firstly, based on the state equation of SS-type compensation, a three-dimensional bifurcation diagram with the coupling coefficient as the bifurcation parameter is established with a numerical simulation to observe the nonlinear phenomena in the system. Then Filippov's method based on a Jacobian matrix model is adopted to deduce the boundary of stable operation and to judge the type of the bifurcation in the system. Then the general flow of the parameter design based on the stability principle for ICPT systems is proposed through the above analysis to realize stable operation under the conditions of weak coupling. Finally, an experimental platform is built to confirm the correctness of the numerical simulation and modeling.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.3
• /
• pp.200-205
• /
• 2022

This paper presents an improved maximum power point tracking method that can fast track the global maximum power point (GMPP) for a photovoltaic system under partial shading conditions. The proposed method combines the advantages of the maximum power trapezium (MPT) method and the search-skip-judge method to minimize the tracking voltage intervals. Thus, the proposed method can quickly track the GMPP by skipping unnecessary tracking voltage intervals. The superiority of the proposed method is verified through simulation results in the MATLAB/Simulink and experimental real-time operation results with the hardware-in-the-loop simulation. The simulation and experimental results demonstrated that the proposed method has a faster tracking time than the MPT method under various partial shading conditions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.853-862
• /
• 2003

With the data base subject of first grade paper test of information handling technician, We proposed special method of evaluating learning ability directivity to judge that student can understand the contents of each chapter exactly or not, using assigned function and fuzzy deduction in this thesis. Using fuzzy logic, the proposed method of evaluating learning ability is dividing the presenting frequency of setting questions for examination about the subject of database into three rank and we can define this as the important. We applied the fuzzy assigned rate about the number of times of studying through the important of studying and the fuzzy assigned rate about formative evaluation to each of nine fuzzy deduction theories and than evaluated comprehension rate of learning. With the fuzzy grade about learning comprehension of each chapter and assigned rate about the score of generalized evaluation; We applied these two thing to the deduction rule of fuzzy and made it as defuzzifier and finally evaluated learning. We made that the result of eventual evaluating learning is very useful for learners to diagnosis learned contents by themselves and also it can be great material to judge that learners can get the goal of learning or not synthetically.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.420-423
• /
• 1995

The stability of system is one of the important aspects and to judge system's stability is another complicated problem. Previously, new technique derived from relaxing Lyapunov conditions has been already introduced and in this paper, this proposed technique applies to the practical dynamic systems. This utility of numerical procedures prove the comparable improvements of the estimation of robustness for dynamic systems having structured (bounded) perturbations.

• International journal of advanced smart convergence
• /
• v.12 no.1
• /
• pp.59-63
• /
• 2023

We create a malware detector classification method with using the Sequential Probability Ratio Test (SPRT) in IoT. More specifically, we adapt the SPRT to classify malware detectors into two categories of basic and advanced in line with malware detection capability. We perform evaluation of our scheme through simulation. Our simulation results show that the number of advanced detectors is changed in line with threshold for fraction of advanced malware information, which is used to judge advanced detectors in the SPRT.

• Proceedings of the Technology Innovation Conference
• /
• 1997.07a
• /
• pp.175-194
• /
• 1997

The competitive power of technologies is required for survival of enterprises in the social environments that change rapidly. So the strategy of technology development becomes more and more important. For the establishment of strategy, the situational analysis and the forecasting analysis are executed and they include the technology assessment and the technological forecasting. The technology assessment is systematical examination and analysis of the present status of technology. Among the various methods of technology assessment, Matrix Method is one of the usual methods. This research is intended to find out the problems and the difficulties in the current Matrix Method, and to improve the method, finally to help the R&D departments of enterprises applying the method. This suggested matrix(TSM Technology Shift Matrix) method is designed so that one can judge the current situation of technology and future expectation, by moving the matrix which is placed to the upside of the basic matrix.