• Animal Bioscience
• /
• v.35 no.9
• /
• pp.1367-1378
• /
• 2022

Objective: The present study was conducted to examine the gas production, fermentation characteristics, nutrient degradation, and methanogenic community composition of a rumen fluid culture with Broussonetia papyrifera (B. papyrifera) subjected to ensiling or steam explosion (SE) pretreatment. Methods: Fresh B. papyrifera was collected and pretreated by ensiling or SE, which was then fermented with ruminal fluids as ensiled B. papyrifera group, steam-exploded B. papyrifera group, and untreated B. papyrifera group. The gas and methane production, fermentation characteristics, nutrient degradation, and methanogenic community were determined during the fermentation. Results: Cumulative methane production was significantly improved with SE pretreatment compared with ensiled or untreated biomass accompanied with more volatile fatty acids production. After 72 h incubation, SE and ensiling pretreatments decreased the acid detergent fiber contents by 39.4% and 22.9%, and neutral detergent fiber contents by 10.6% and 47.2%, respectively. Changes of methanogenic diversity and abundance of methanogenic archaea corresponded to the variations in fermentation pattern and methane production. Conclusion: Compared with ensiling pretreatment, SE can be a promising technique for the efficient utilization of B. papyrifera, which would contribute to sustainable livestock production systems.

• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.437-453
• /
• 2006

More than 3,000 landslides were occurred by torrential rains in Gangneung area due to the typhoon Rusa in 2002. In order to analyze the landslide origin and its geometric characteristics, 1,365 landslide data were collected from the field survey of Sacheon, Jumunjin, and Yeongok areas in which the intensive landslides took place. The average landslide size in the study area was composed of 10m width, 30m length, and $21^{\circ}{\sim}35^{\circ}$ slope angle, and the plane view of landslides A-type (i.e. wide shape of lower part) that contains approximately 50.5% of the landslides commonly occurred. In particular the area of Sacheon heavily damaged by mountain fires had more occurrence of landslides than other areas. The landslides of uniform tendency of slope direction were examined resulted from the contribution of topographic characteristics due to the weathering and wind direction during heavy rainfalls. In order to analyze the direction of joint, 249 orientation data were collected from the study area. The window method was employed to determine the characteristics of joint density in 51 locations of the study area. The results showed that many landslides occurred in the areas of joint density with the range of $0.05{\sim}0.1$.

• Journal of Oral Medicine and Pain
• /
• v.38 no.2
• /
• pp.149-159
• /
• 2013

The purpose of this study was to investigate the relationship between horizontal morphology of lateral pterygoid muscle and onset of temporomandibular joint disorders. Randomly selected 150 subjects, assigned with equal number in terms of gender and age group, were included. The axial and sagittal images in their magnetic resonance images of the temporomandibular joints were used to measure the morphologic characteristics of lateral pterygoid muscles and temporomandibular joints. The measurement variables were maximal horizontal width and insertion angle to the condyle, position of the articular disc, condylar deformity, and joint effusion. In addition, presence or absence of the temporomandibular joint pain was examined through history and palpation of the joints. The relationships among measurement variables were analyzed and the results were as follow. The insertion angle of the lateral pterygoid muscle to the condyle was higher in the joint of anterior disc displacement without reduction than that in the joint of normal disc position. In addition, the maximal horizontal width of the lateral pterygoid muscle was significantly increased in joints with pain than those without pain. Also, the insertion angle was significantly higher in younger age group and the maximal width was significantly greater in male than in female. These results suggest that high insertion angle of lateral pterygoid muscle might be an important anatomic predisposing factor for anterior disc displacement in temporomandibular joint and muscular activity of lateral pterygoid muscle might be affected by preauricular pain. In conclusion, there might be a bi-directional interaction between lateral pterygoid muscle and joint in the progression of anterior disc displacement in temporomandibular joint.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.645-650
• /
• 2004

There have been lots of efforts to analyze the dynamic characteristics of mechanical systems. However, it is difficult to know the dynamic characteristics of mechanical systems composed of many parts with joints. Specially, in case of a bolted joint structure, no effective modeling method has been defined to acquire dynamic characteristics of the structure, using the finite element (FE) analysis. In this research, a linear dynamic model is developed for bolted joints and large interfaces using con frusta method and linear spring elements, respectively. The developed modeling method for bolted joints is verified based on the experimental result.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.55-60
• /
• 2002

$100 A/mm^2$ class Bi-2223 tapes have recently become commercially available. Some important characteristics of the tapes, e .g. critical current, ac loss, characteristics at joint, fault current characteristics, are required for an application such as a power cable or a power transformer. In this paper they have been investigated experimentally. The results indicate that the self-field loss of the high current density tapes is not negligible, compared to resistive loss in a copper wire for the same currents. In a cable, the self-field loss for relatively large currents is much larger than the magnetization loss due to an external field. But in a transformer, the magnetization loss is dominant, compared to the self-field loss. Finally the fault current characteristics show that the high current density tapes are never safe from burn-out even for fault currents with a few cycles.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.4
• /
• pp.142-148
• /
• 2008

This study aims to find the optimal cutting conditions, which are obtained by grinding condition, and the grinding characteristics and condition of constant velocity joint were investigated with respect to wheel velocity, depth of cut, feed speed. Grinding machine has been widely used in manufacturing optical reflects of metal. Such as steel are easy to be machined because of their proper material. As a result I obtained the data of grinding conditions makes good surface roughness and the optimal condition of grinding and get the mesh condition. The purpose of this study is to find the optimum grinding wheel characteristics for cutting constant velocity joint.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.10
• /
• pp.990-998
• /
• 2004

There have been lots of efforts to analyze the dynamic characteristics of mechanical systems. However, it is difficult the know the dynamic characteristics of mechanical systems composed of many parts with joints. Specially, in case of a bolted Joint structure, no effective modeling method has been defined to acquire dynamic characteristics of the structure using the finite element (FE) analysis. In this research, a linear dynamic model is developed for bolted feints and large interfaces using con frusta method and linear spring elements, respectively. The developed modeling method for bolted joints is verified based on the experimental result.

• Tunnel and Underground Space
• /
• v.28 no.3
• /
• pp.193-208
• /
• 2018

In order to interpret rock slope safely and effectively, the mechanical properties of the rock must be carefully investigated. However, due to the limitations of clinometer usage, a new measure of measurement is required to complement these limitations. In this study, a measuring device was developed to analyze the characteristics of joint orientation, and to apply the orientation of joint to the field. The developed measuring equipment is divided into analysis software and hardware. The hardware was composed of a measuring module that measures the joint orientation of rock and a transport module that transmits the measurement data. The software was developed to analyze the orientation of the joint from the data obtained from the measuring module and is named Drone Joint Orientation Survey Measurement. The developed measuring equipment was well field capable if it could not be measured by the inspector, such as in areas where access was difficult, and was capable of effectively analyzing the lab test results for the orientation of the joint.

• Journal of the Korean Society of Physical Medicine
• /
• v.13 no.1
• /
• pp.49-62
• /
• 2018

PURPOSE: This study investigated the influence of a specific hip joint exercise program on the characteristics of chronic low back pain (LBP), hip joint range of motion (ROM), and performance level in amateur golfers with LBP. METHODS: The study included 28 adult male amateur golfers with LBP and reduced internal rotation (IR) of the lead side hip joint. Subjects were randomly assigned to an experimental (EG) (n=14) or control group (CG) (n=14). The Numerical Rating Scale score for pain, ROM of the hip joint and trunk rotation, performance parameters for golfing were evaluated. A specific exercise program designed to improve IR of the lead side hip joint was performed by the EG, but not the CG. Post-intervention evaluation was performed and the collected data were analyzed. RESULTS: After the intervention, the severity of LBP was significantly reduced (p<.05) and the IR ROM of the lead side hip joint was significantly increased (p<.01) in the EG. Moreover, the trunk rotation range was significantly increased in the EG (p<.01). The drive distance was significantly difference between the EG and CG (p<.05). CONCLUSION: A specific hip joint exercise program can help to reduce pain level and improve performance level in amateur golfers with LBP and increased IR ROM of the lead side hip joint. A significant increase in ROM of the lead side hip joint reduce LBP and was related to driving distance in the EG.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.11
• /
• pp.1628-1633
• /
• 2017

The purpose of this study was to identify the difference and correlation in elbow joint maximal flexion strength according to measurement methods and characteristics of muscular contraction, and to develop the predictive equation of elbow joint maximal flexion strength for the optimal exercise intensity setting and accurate measurement. Subjects were 30 male university students. Elbow joint maximal flexion strength of isokinetic contraction, isometric contraction at $75^{\circ}$ elbow joint flexion position, isotonic concentric 1RM, manual muscle strength (MMT) were measured with isokinetic dynamometer, dumbbell, and manual muscle tester. Pearson's r, linear regression equation, and multiple regression equation between variables were calculated. As a result, the highest value was isometric contraction. The second highest value was MMT. The third highest value was isokinetic contraction. 1RM was the lowest. Predictive equations of elbow joint maximal flexion strength between isometric and isokinetic contraction, between isometric contraction and 1RM, among isometric contraction, 1RM, and body weight were developed. In conclusion, 1RM and isokinetic elbow joint maximal flexion strength could be seemed to underestimate the practical elbow joint maximal flexion strength. And it is suggested that the developed predictive equations in this study should be useful in criteria- and goal-setting for resistant exercise and sports rehabilitation after elbow joint injury.