• 대한치과기공학회지
• /
• 제25권1호
• /
• pp.95-102
• /
• 2003

The purpose of this study was to show occlusion on the simple hinge articulator optionally mounted. Modelling of upper-lower jaw and simple hinge articulator were developed. This modelling of upper-lower jaw inserting wax bite was mounted imaginary on the modelling of simple hinge articulator by use of the computer simulation. From changes of THA(transverse horizontal axis)-incisor distance, Balkwill angle and THA deviation, eight types were mounted respectively. After removal of wax bite, upper-lower jaw position changing were compared with centric jaw relation. The results were as follows: 1. The change of THA-incisor distance had influence on mostly a vertical shift of upper jaw. 2. The change of Balkwill angle had influence on mostly a horizontal shift of upper jaw. 3. Inferior type in the THA deviations was the least shift of upper jaw. The above results suggest that the simple hinge articulator optionally mounted effect a shift of upper jaw.

• 대한치과의사협회지
• /
• 제50권11호
• /
• pp.677-681
• /
• 2012

Orthognathic surgery(2-jaw or 1-jaw surgery) is very famous one of cosmetic techniques. However, primary purpose of orthognathic surgery is to improve the occlusion of jaw and secondary purpose is to improve the esthetic result. Unfortunately, many patients don't only confuse often primary and secondary purpose of orthognathic surgery but they think the esthetic result is more important than the occlusion. Therefore, oral and maxillofacial surgeon has to fully understand cosmetic needs of patient and reflect that in the treatment plan. Patients with prominent mandibular angle want to have the narrower face of so called 'V-line' shape. Various techniques like the angle shaving, ostectomy of the lateral cortex around the mandibular angle and masseter musclectomy can be used for improving the mandibular angle hypertrophy. These techniques also can be applied in orthognathic surgery at the same time. We operated patients of orthognathic surgery, especially, with wide lower face and post-operative results were satisfactory in all cases. So, we propose mandibular angle management for improving the esthetic result of orthognathic surgery.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.1042-1045
• /
• 2005

The wedge type rail clamp has the operating mechanism: First, the jaw pad clamps a rail with small clamping force. Next as the wind speed increases, the clamping force of the Jaw pad Is Increased by the wedge. The initial clamping force of a jaw pad was determined by the clamping angle of a locker. In this study, we carried out the finite element analysis to evaluate the relationship between the clamping angle of a locker and the clamping force of a jaw pad with respect to the design wind speed, such as 2, 4, 6, 8, and 10m/s, we adopted the wedge type rail clamp fur 50tons class container crane with the wedge angle of $10^{\circ}$.

• 대한치과교정학회지
• /
• 제9권1호
• /
• pp.133-140
• /
• 1979

The author compared patients showing two extremes of incisor vertical relationship to find out differences in craniofacial morphology which might influence face height and incisor overbite. The subjects consisted of 53 open-bite cases and the same number of deep-bite cases. The results were as follows: 1. On the average, the lower face height was significantly greater in open-bite cases than in deep-bite cases. 2. In open-bite cases, gonin-menton length was significantly greater than in deep-bite cases. In deep-bite cases, anterior cranial base length and posterior cranial base length were significantly greater in open-bite cases. 3. The jaw angle was significantly greater in open-bite cases. 4. The gonion-menton-nasion angle was significantly greater in deep-bite cases. 5. From geometric standpoint, the increase of jaw and joint angle would increase lower face height, but these two showed negative correlation. 6. The sizes of the jaw and joint angle might be factors of open-bite or deep-bite, but these were not the only variables that determined lower face height. 7. In open-bite cases, there was a closer correlationship between lower face height and the other linear measurments than in deep-bite cases. In deep-bite cases, there was a closer correlationship between lower face height and the other angular measurements than in open-bite cases. 8. Considering both linear and angular measurements of facial polygon, all contributed significantly to the lower face height. The nonsignificant variables were jaw and joint angle in open-bite cases, and anterior cranial base length, jaw angle, and joint angle in deep-bite cases.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 추계학술대회 논문집
• /
• pp.247-252
• /
• 2005

쐐기형 레일클램프는 작은 초기 압착력으로 레일을 압착한 후 풍속이 증가함에 따라 쐐기작용에 의해 압착력이 증가하여 레일을 강하게 압착하는 구조를 가지고 있다. 쐐기형 레일클램프를 설계하기 위해서는 쐐기작용을 위한 적정 쐐기각과 초기압착력 발휘를 위한 적정 Locker의 물림각을 결정해야 한다. 적정 쐐기각에 관한 연구는 이미 수행되었으며, 본 연구에서는 Locker의 적정 물림각을 설정하기 위하여 이전 연구를 바탕으로 $10^{\circ}$의 쐐기각을 갖는 레일클램프에서 Locker의 물림각과 Jaw pad의 압착력 사이의 상관관계를 실험적 분석을 통해 살펴보았다. 레일클램프의 초기 압착력은 Locker의 물림각에 의해 결정되므로 3, 4, 5, $6^{\circ}$의 4가지 Locker의 물림각에 따른 Locker의 물림력을 압력게이지를 이용하여 측정한 후 Jaw pad의 압착력을 산출하여 유한요소해석결과와 비교하였다.

• Geomechanics and Engineering
• /
• 제23권2호
• /
• pp.165-178
• /
• 2020

This paper investigates the effect of the jaw's curvature, also known by contact angle and jaw arc central angle (2α), of the Brazilian test apparatus on indirect tensile strength of various rock types. That's why, ten rock samples including limestone, marble, skarn, granite, diorite, and granodiorite were collected from some quarries in different provinces of Iran. Petrographic, mineralogical and textural investigations were performed using thin section analyses. Physical properties of the selected rock samples namely dry and saturated unit weights, porosity, water absorption, and specific gravity were determined for the rock samples. In addition, Brazilian tensile strength at different 2α angles (i.e., 2α = 0°, 10°, 15°, 20°, 45°, and 60°) were determined for the rocks in the laboratory. Results show that the parameter for the rocks is between 3.81 MPa at 2α=0° and 54.76 MPa at 2α=60°. This means that Brazilian tensile strength increased with increasing 2α angle from 0° to 60°. Also, it was found that the highest change rate of the Brazilian tensile strength occurs in range of 2α=15°-30° for most studied rock samples. In some tested samples, the parameter is decreased only at 2α = 60°. The values of Brazilian tensile strength of the rocks tested by flat and standard jaws are near to each other.

• 말소리와 음성과학
• /
• 제10권4호
• /
• pp.77-89
• /
• 2018

Speech articulators are coordinated for the purpose of segmental constriction in terms of a task. In particular, vertical jaw movements repeatedly contribute to consonantal as well as vocalic constriction. The current study explores vertical jaw movements in conjunction with bilabial constriction in bilabial stop /p/ in the context /a/-to-/a/. Revisiting kinematic data of /p/ collected using the electromagenetic midsagittal articulometer (EMMA) method from seven (four female and three male) speakers of Seoul Korean, we examined maximum vertical jaw position, its relative timing with respect to the upper and lower lips, and lip aperture minima. The results of those dependent variables are recapitulated in terms of linguistic (different word boundaries) and paralinguistic (different speech rates) factors as follows. Firstly, maximum jaw height was lower in the across-word boundary condition (across-word < within-word), but it did not differ as a function of different speech rates (comfortable = fast). Secondly, more reduction in the lip aperture (LA) gesture occurred in fast rate, while word-boundary effects were absent. Thirdly, jaw raising was still in progress after the lips' positional extrema were achieved in the within-word condition, while the former was completed before the latter in the across-word condition. Lastly, relative temporal lags between the jaw and the lips (UL and LL) were more synchronous in fast rate, compared to comfortable rate. When these results are considered together, it is possible to posit that speakers are not tolerant of lenition to the extent that it is potentially realized as a labial approximant in either word-boundary condition while jaw height still manifested lower jaw position in the across-word boundary condition. Early termination of vertical jaw maxima before vertical lower lip maxima across-word condition may be partly responsible for the spatial reduction of jaw raising movements. This may come about as a consequence of an excessive number of factors (e.g., upper lip height (UH), lower lip height (LH), jaw angle (JA)) for the representation of a vector with two degrees of freedom (x, y) engaged in a gesture-based task (e.g., lip aperture (LA)). In the task-dynamic application toolkit, the jaw angle parameter can be assigned numerical values for greater weight in the across-word boundary condition, which in turn gives rise to lower jaw position. Speech rate-dependent spatial reduction in lip aperture may be able to be resolved by means of manipulating activation time of an active tract variable in the gestural score level.

• Journal of Multimedia Information System
• /
• 제6권2호
• /
• pp.67-74
• /
• 2019

Bone density is one of the factors in the early failure of dental implants and doctors should make a preoperative assessment of jaw bone density using patient's CT data before dental implant surgery in order to find out whether the patient has osteoporosis and osteopenia. The main goal of this study was to propose a method that based on image processing techniques in order to provide accurate information about where to drill and place an abutment screw of implants in the jaw bone for doctors and reduce human activity for the estimation of the local cancellous bone density of mandible using CT data. The experiment was performed on a computed tomography data of the jaw bone of two different individuals. We assumed that the result of the estimation of jaw bone density depends on the angle of drilling and average HU (Hounsfield Unit) values were used to evaluate the quality of local cancellous bone density of mandible. As a result of this study, we have been developed a toolbox that can be used to estimate jaw bone density automatically and found a positive correlation between the angle of the drill and time complexity but a negative correlation between the diameter of the drill and time complexity.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권2호
• /
• pp.141-147
• /
• 2007

The purpose of this study was to evaluate the effects of maxillary occlusal plane angle to postoperative skeletal stability by comparative analysis after two-jaw surgery of patients with skeletal CIII malocclusion. This study was made with lateral cephalometric radiography of 52 patients with skeletal class III malocclusion that were performed to Le Fort I osteotomy and BSSRO. And 52 patients were divided to Group A(n=30) and B(n=22). Maxillary posterior impaction was not conducted in Group A, which the pre-operative maxillary occlusal plane angle was in a normal range, and for Group B, which the pre-operative maxillary occlusal plane was low, the maxillary posterior impaction was conducted. The results were obtained as follows : 1. The relapse rate of Group A, which the pre-operative maxillary occlusal plane angle was in a normal range, was relatively stable compared to Group B, which the pre-operative maxillary occlusal plane was low. 2. The relapse rate of each measurement of Group B, which had the maxillary occlusal plane altered during the operation, was somewhat high, and of those, the post-operative relapse rate of overjet, overbite, mandibular plane angle appeared to be significantly high in the statistics. The analyzed results above, was thought to be indicating that the pre-operative maxillary occlusal plane angle was closely related to the post-operative skeletal stability, and that obtaining post-operative skeletal stability only through operative normalization of occlusal plane angle may meet limitations.

• 대한치과교정학회지
• /
• 제27권1호
• /
• pp.21-33
• /
• 1997

부산대학교병원 교정과에서 골격성 III급 부정 교합으로 진단되어 술전교정치료를 받고 악안면구강외과에서 악교정 수술을 받은 편악 수술군 18명과 양악 수술군 24명, 총 42명을 대상으로 초진, 수술 전, 수술 직후 및 수술 후 6개월 이상 경과 후에 채득한 측모두부방사선규격사진을 이용하여 분석하였다. 편악 수술군과 양악 수술군에서 치료과정에 따른 변화를 조사하여 악교정수술후 하악의 안정성에 영향을 미치는 요소를 알아보고자 분산분석을 기초로 하여 단계적 다중 희귀 분석을 시행하여 다음과 같은 결과를 얻었다. 1. 편악 수술군에서 수술에 의한 이동량, 하악전치 고경의 변화와 술전교정치료에 의한 하악평면각의 변화 및 하악전치의 경사도 변화가 악교정 수술후 하악의 안정성을 잘 설명하였고 결정계수는 0.84이었다. 2. 양악 수술군에서 수술에 의한 하악의 후방 이동량이 악교정 수술후 하악의 안정성을 설명하였고 결정계수는 0.28이었다.