• Textile Coloration and Finishing
• /
• v.18 no.2 s.87
• /
• pp.39-45
• /
• 2006

The aim of this work is to develop sense-differentiated textiles using Thick-Thin polyester yarn(T-T yarn) with finer than 1 denier mono filament. The ITY(Interlace Textured Yarn) using T-T yarn with various over feed ratios of PET filament was manufactured with different shrinking percentage of core yarn and then the fabrics were woven on the same weaving 100m using ITY produced. The mechanical properties and the handles of the fabrics were examined with KES-FB system suggested by Kawabata. The shrinkage of ITY was increased with decreasing over feed ratio and increased with increasing heat treatment temperature of T-T yarn. The initial elasticity modulus of ITY was decreased with increasing over feed ratio and heat treatment temperature of T-T yarn. The tensile energy of fabrics was decreased with increasing of over feed ratio, but bending rigidity and shear rigidity of fabrics were increased with increasing of over feed ratio of PET filament. The results indicate that the fabric using T-T yarn with finer than I denier mono filament can be used for the purpose of sense-differentiated textile.

• Textile Coloration and Finishing
• /
• v.11 no.2
• /
• pp.9-18
• /
• 1999

In order to establish fundamental data for the betterment of Polyester microfiber fabric handle, a study by using fixed warp of ITY yarn samples with P/F, DTY, and ITY weft yarns was performed. For this purpose the samples of total 27 kinds were prepared. That is, each sample yarn was twisted in three ways and for each twisted yarn the fabric structures were modified in three ways, plain, twill, and satin. The examination was done by focusing on the point of the change of handles and the characteristics of the mechanical properties of the samples with the change of yarn and the fabric structure. The handles and the mechanical properties were examined with the KES-F system suggested by Kawabata. The results were as follows : 1. WT and MIU increased with increasing the twist. By comparing WT and MIU by yarn, DTY was higher than P/F. It appeared that twill and satin were higher than plain. 2. The bending rigidity change in DTY with increasing the twist was not significant, however in P/F it appeared apparently decreased with increasing the tlvist. Also, it appeared that when using P/F as weft the bending rigidity was higher than when using DTY and the twill structure appeared higher than the satin structure. 3. In shear force the increasing rates of plain and the twill were higher than satin. When DTY and P/F were used as weft, the shear force was higher in ITY and DTY than in P/F case. 4. Koshi appeared higher in the order of plain, twill and satin. When DTY and P/F were used as the weft Koshi increased with increasing the twist in plain, however in twill and satin it appeared to decrease. In hand value ITY(=7.5) appea.ed to be highe. than DTY and P/F(=6.5). 5. In all cases Shinayakasa decreased with increasing the twist. The hand values observed that satin was =4, twill was =3, and plain was =1.5. 6. Fukurami showed no significant change with increasing the twist in DTY, however in P/F and ITY it decreased.

• Textile Coloration and Finishing
• /
• v.13 no.2
• /
• pp.135-140
• /
• 2001

Interlace texturing is very useful method to make compound yarns for new synthetic fabrics. In this study, we make the compound ems for peach skin fabric by interlace texturing method. This study surveys relationship between physical properties of interlace textured yarns and process conditions such as air pressure, yarn tension and take-up speed. Nip density, tensile properties and multi-step shrinkage of the various specimens were discussed with process conditions.

• Kyungpook Mathematical Journal
• /
• v.26 no.1
• /
• pp.63-66
• /
• 1986

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.54-54
• /
• 2000

For its synergistic relationship, an integrated SDINS/GPS system has been adopted in many navigation areas. As an application of SDINS/GPS integration, the in-flight alignment process of a SDINS utilizing GPS carrier phase measurements is introduced and analyzed via an observability analysis using nul1 space method. A measurement model of double-differenced GPS carrier phase measurements is newly derived in order to be used with a SDINS error model. Also, conditions for determining the complete observability of a SDINS/GPS system are suggested and proved. Consequently, it is shown that the system is not completely observable in case of one basel me. With one baseline aligned with y-axis of body frame, pitch error and x-axis accelerometer bias are unobservable states. Also shown is that al1 states are completely observable when sequential maneuver is performed. Above results are confirmed by a covariance analysis.

• Textile Coloration and Finishing
• /
• v.13 no.2
• /
• pp.49-49
• /
• 2001

Interlace texturing is very useful method to make compound yarns for new synthetic fabrics. In this study, we make the compound yarns for peach skin fabric by interlace texturing method. This study surveys relationship between physical properties of interlace textured yarns and process conditions such as air pressure, yarn tension and take-up speed. Nip density, tensile properties and multi-step shrinkage of the various specimens were discussed with process conditions.

• Textile Coloration and Finishing
• /
• v.12 no.5
• /
• pp.273-279
• /
• 2000

Interlace textured yarn was developed in order to increase weaving process efficiency. Today, interlace texturing is very useful method of manufacturing the high added value compound yarns for new synthetic fabrics. In this research, new silky type high added value compound yarns were. manufactured by interlace texturing technology and tested their properties. The object of this research is to investigate the relationship between interlace textured yarn properties and processing parameters that is air pressure, yarn tension and take-up speed. The original filament yarns used were TTD(Thick & Thin Semi-Dull) 110d/72f and SCD(Semi-Dull Cation Dyeable) 75d/36f. 27 specimens were manufactured and tested for their physical properties-nip density, tensile properties, multi-step shrinkage test and surface structure by SEM. The air pressure was main process condition to change properties of interlace textured yarns. And interlace textured process had influence on weaving preparation process, weaving, knitting and so on. It has some influence on shrinkage properties of dyeing and finishing processes.

• Journal of applied mathematics & informatics
• /
• v.5 no.3
• /
• pp.797-804
• /
• 1998

A pair of multiobjective generalized symmetric dual non-linear programming problems and weak strong and converse dual-ity theorems for these problems are established under generalized $\rho-(\eta,0)$-invexity assumptions. Several known results are obtained as special cases.

• Journal of applied mathematics & informatics
• /
• v.6 no.1
• /
• pp.265-272
• /
• 1999

In this paper we define generalized concepts of cardinal-ity of a fuzzy-valued function and obtained some properties of these new concepts.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1993.11a
• /
• pp.52-53
• /
• 1993