• Journal of the Society of Naval Architects of Korea
• /
• 제48권3호
• /
• pp.281-287
• /
• 2011

This paper explains the basic theory and a new development of for the residual strength prediction program of the asymmetrically damaged ships, being capable of searching moment-curvature relations considering neutral axis mobility. It is noted that moment plane and neutral axis plane should be separately defined for asymmetric sections. The validity of the new program is verified by comparing moment-curvature curves of 1/3 scaled frigate model where the results from new algorithm well coincide with experimental and nonlinear FEA results for intact condition and with nonlinear FEA results for damaged condition. Applicability of new algorithm is also verified by applying VLCC model to the newly developed program. It is proved that reduction of residual strengths is visually presented using the new algorithm when damage specifications of ABS, DNV and IMO are applied. It is concluded that the new algorithm shows very good performance to produce moment-curvature relations with neutral axis mobility on the asymmetrically damaged ships. It is expected that the new program based on the developed algorithm can largely reduce design period of FE modeling and increase user conveniences.

• Journal of Ocean Engineering and Technology
• /
• 제32권6호
• /
• pp.427-432
• /
• 2018

Tidal current power is one of the energy sources of the ocean. Electricity can be generated by converting the flow energy of the current into the rotational energy of a turbine. Unlike tidal barrage, tidal current power does not require dams, which have a severe environmental impact. A floating-type tidal current power device can reduce the expensive support and installation cost, which usually account for approximately 41% of the total cost. It can also be deployed in relatively deep water using tensioned wires. The dynamic behavior of a floater and turbine force are coupled because the thrust and moment of the turbine affect the floater excursion, and the motion of the floater can affect the incoming speed of the flow into the turbine. To maximize the power generation and stabilize the system, the coupled motion of the floater and turbine must be extensively analyzed. However, unlike pile-fixed devices, there have been few studies involving the motion analysis of a moored-type tidal current power device. In this study, the commercial program OrcaFlex 10.1a was used for a time domain motion analysis. In addition, in-house code was used for an iterative calculation to solve the coupled problems. As a result, it was found that the maximum mooring load of 200 kN and the floater excursion of 5.5 m were increased by the turbine effect. The load that occurred on the mooring system satisfied the safety factor of 1.67 suggested by API. The optimum mooring system for the floating tidal current power device was suggested to maximize the power generation and stability of the floater.

• International conference on construction engineering and project management
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.1130-1137
• /
• 2022

The Industry Foundation Classes (IFC) provides standardized product models for the building construction domain. However, the current IFC schema has limited representation for infrastructure. Several studies have examined the data schema for road and highway modeling, but not in a sufficiently comprehensive and robust manner to facilitate the overall integrated project delivery of road projects. Several discussions have focused on slope engineering for road projects, but no solution has been provided regarding the formalized parametric modeling up to now. Iterative design, analysis, and modification are observed during the process of slope design for road projects. The practitioners need to carry out the stability analysis to consider different road design alternatives, including horizontal, vertical, and cross-section designs. The procedure is neither formalized nor automated. Thus, there is a need to develop the formal representation of the product and process of slope analysis for road design. The objective of this research is to develop a formal representation (i.e., an IFC extension data schema) for slope analysis. It consists of comprehensive information required for slope analysis in a structured manner. The deliverable of this study contributes to both the formal representation of infrastructure development and, further, the automated process of slope design for road projects.

• Journal of information and communication convergence engineering
• /
• 제14권1호
• /
• pp.26-34
• /
• 2016

The alignment of DNA sequences is one of the important processes in the field of bioinformatics. The Smith-Waterman algorithm (SWA) performs optimally for aligning sequences but is computationally expensive. Field programmable gate array (FPGA) performs the best on parameters such as cost, speed-up, and ease of re-configurability to implement SWA. The performance of FPGA-based SWA is dependent on efficient cell-basic implementation-unit design. In this paper, we present an optimized systolic cell design while avoiding oversimplification, very large-scale integration (VLSI)-level design, and direct mapping of iterative equations such as previous cell designs. The proposed design makes efficient use of hardware resources and provides portability as the proposed design is not based on gate-level details. Our cell design implementing a linear gap penalty resulted in a performance improvement of 32× over a GPP platform and surpassed the hardware utilization of another implementation by a factor of 4.23.

• Journal of the Korean Institute of Rural Architecture
• /
• 제15권2호
• /
• pp.41-51
• /
• 2013

In the midst of growing demand for rural life of urban dwellers, this study tried to investigate the difference in behavior and recognition about urban rural exchange between Korea and Japan. For this, this study utilized 2,000 total samples of the survey conducted by MLIT in Japan, because Japan has experienced a low birth rate and aging population earlier and actively promoting urban rural exchange program than South Korea. The result of the analysis is as follows. First, the needs for rural life of urban dwellers are similar both in Japan and South Korea. However, Japanese prioritize future efforts to current efforts. Second, urban dwellers' activities in rural areas were classified into three categories; field trips and hands-on activities, cruise and circulating activities, and leisure activities. Third, similarly three types of visit or intercourse of urban dwellers into rural areas were classified; repeatedly visit the same place as 'iterative type', visit a new place as 'new pioneer type', and not yet determined as 'undefined type'. Variables such as age of household, income, number of inmate, and number of children were analyzed linked to these three types of visit or intercourse in a Discriminant analysis. As a result, only 'age of household', however, turned out to be the crucial factor which influence decisively distinguishing characteristics of these three types of visit into rural areas.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제10권5호
• /
• pp.97-103
• /
• 2010

There are many algorithms for 2D to 3D graphic conversion technology which have the high complexity and large scale of iterative computation. So in this paper propose parallel algorithm and high speed graphics accelerator architecture using Park's MAMS(Multiple Access Memory System) for Phong Shading, one of many 3D algorithms. The Proposed SIMD processor architecture is simulated by HDL and simulated and got 30 times faster result. It means any kinds of 3D algorithm can make parallel algorithm and accelerated by SIMD processor with Park's MAMS for real time processing.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• 제41권11호
• /
• pp.105-113
• /
• 2004

This paper proposes 3D graphics accelerator, especially rendering unit, for portable devices. The existing 3D architecture is not suitable for portable devices because of its huge size. To reduce the size, we use iterative architecture and fixed-point calculation. In this paper, we suggest the format of fixed-point comparing with the result images, and some special technique to control. Finally, it is implemented with FPGA and 0.25um ASIC technology respectively. The ASIC chip can execute 47.88M pixels per second. The size of ASIC chip is 4.9287mm*4.9847mm and the power consumption is 263.7mW with 50MHz operation frequency.

• Journal of the Korean Institute of Landscape Architecture
• /
• 제25권2호
• /
• pp.73-81
• /
• 1997

The main purpose of this study was to develop a new method for evaluation of stream naturalness in order to appraise and prescribe for streams effectively in the process of ecological restoration of stream corridors. The results are as follows : 1) For this purpose six factors were selected on considering the spatial axes of stream corridor variation and total 20 descriptors about the physical structure were selected. 2) The calculation of S.N.I. for each segment was consisted of three steps, such as calculation of S.N.I.s of the individual descriptors, averaging all the descriptors's for each factor, and finally averaging the factors's for the Total S.N.I. 3) The evaluation unit was decided to be 100m size. The score system ranging 1~5 was adopted. Weighting parameters of factors were unified with each other. 4) A GIS model was adopted for classification, calculation, querying, analysing, and presenting S.N.I. information. And the format of S.N.I. maps including statistical graphs and other spatial watershed information was designed for the GIS odel. The naturalness of stream corridor was was investigated by the naturalness of habitat, and assessed by the descriptors focused on physical structure, therefore the S.N.I. can manifest prescriptions for restoration of the stream corridor. On the other hand because some evaluation factors such as water quality, water volume, fauna, flora, functions of stream exosystem has been excluded, S.N.I. could have some limits on representing the full aspects of stream naturalness. This evaluation method is hypothetical one, so it would be investigated through iterative applicatons.

• Journal of Korean Association for Spatial Structures
• /
• 제19권2호
• /
• pp.43-50
• /
• 2019

A smart connective control system was invented recently for coupling control of adjacent buildings. Previous studies on this topic focused on development of control algorithm for the smart connective control system and design method of control device. Usually, a smart control devices are applied to building structures after structural design. However, because structural characteristics of building structure with control devices changes, a iterative design is required for optimal design. To defeat this problem, an integrated optimal design method for a smart connective control system and connected buildings was proposed. For this purpose, an artificial seismic load was generated for control performance evaluation of the smart coupling control system. 20-story and 12-story adjacent buildings were used as example structures and an MR (magnetorheological) damper was used as a smart control device to connect adjacent two buildings. NSGA-II was used for multi-objective integrated optimization of structure-smart control device. Numerical simulation results show the integrated optimal design method proposed in this study can provide various optimal designs for smart connective control system and connected buildings presenting good control performance.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.667-679
• /
• 2020

As the LNG carrier operates in ice covered waters, it is key to ensure the overall safety, which is related to the coupling effect of ice-breaking process and internal liquid sloshing. This paper focuses on the sloshing simulation of the ice-breaking LNG carrier, and the numerical method is proposed using Circumferential Crack Method (CCM) and Volume of Vluid (VOF) with two main key factors (velocity νx and force Fx). The ship motion analysis is carried out by CCM when the ship navigates in the ice-covered waters with a constant propulsion power. The velocity νx is gained, which is the initial excitation condition for the calculation of internal sloshing force Fx. Then, the ship motion is modified based on iterative computations under the union action of ice-breaking force and liquid sloshing load. The sloshing simulation under the LNG tank is studied with the modified ship motion. Moreover, an ice-breaking LNG ship with three-leaf type tank is used for case study. The internal LNG sloshing is simulated with three different liquid heights, including free surface shape and sloshing pressure distribution at a given moment, pressure curves at monitoring points on the bulkhead. This present method is effective to solve the sloshing simulation during ice-breaking process, which could be a good reference for the design of the polar ice-breaking LNG carrier.