• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1991년도 추계학술발표회 논문집 지반공학에서의 컴퓨터 활용 COMPUTER UTILIZATION IN GEOTECHNICAL ENGINEERING
• /
• pp.216-232
• /
• 1991

This Finite Element Program(TAFEM) has been developed to be able to carry out the structural analsis of tunnel section and simulate the surrounding ground behaviour due to New Austrian Tunnelling Method, of which main support is the surrounding ground, itself. The Elasto-plastic theory has been applied. The used finite elements are 8-noded isoparametric element(rock & shotcrete), 2 or 3-noded rod element(rock bolt) and infinite boundary element. The load incremental method and tangential stiffness method has been used. Associated flow rule was applied to plastic flow and yield criteria inclued not only Mohr-Coulomb but also Drucker-Prager. In this paper, Drucker-Prager yield criterion has been used. The relationship between plastic strain and stress is based on the incremental strain concept and stress-strain equation on the basis of the stress path of each gauss point has been adopted. It may be rational that rock is considered to be no-tension material, so that no-tension analysis has been adopted in accordance with the brittle fracture constitutive equation.

• Smart Structures and Systems
• /
• 제16권5호
• /
• pp.853-872
• /
• 2015

Numerical analysis of large amplitude free vibration behaviour of laminated composite spherical shell panel embedded with the piezoelectric layer is presented in this article. For the investigation purpose, a general nonlinear mathematical model has been developed using higher order shear deformation mid-plane kinematics and Green-Lagrange nonlinearity. In addition, all the nonlinear higher order terms are included in the present mathematical model to achieve any general case. The nonlinear governing equation of freely vibrated shell panel is obtained using Hamilton's principle and discretised using isoparametric finite element steps. The desired nonlinear solutions are computed numerically through a direct iterative method. The validity of present nonlinear model has been checked by comparing the responses to those available published literature. In order to examine the efficacy and applicability of the present developed model, few numerical examples are solved for different geometrical parameters (fibre orientation, thickness ratio, aspect ratio, curvature ratio, support conditions and amplitude ratio) with and/or without piezo embedded layers and discussed in details.

• 터널과지하공간
• /
• 제7권1호
• /
• pp.20-30
• /
• 1997

A discrete joint finite element with joint surface degradation was developed to investigate the shear behavior of rough rock joint. Isoparametric formulation was used for facilitating the implementation of the element in existing Finite Element Codes. The elasto-plastic joint deformation model with the discontinuity constitutive law proposed by Plesha was applied to the element. The reliability of the developed finite element code was successfully testified through numerical direct shear tests conducted under both constant normal stress and constant normal displacement conditions. The result of the numerical direct shear test showed that the code can capture characteristic deformation features envisaged in the direct shear test of rough rock joint.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.529-534
• /
• 1998

To find out an adequate failure criterion in two-dimensional linear elastic crack problems, finite element programs, SED, which determine stress intensity factors $K_I, K_{II}$, crack angle and peak load by the minimum strain energy density failure criterion were developed. In this program, the conventional quadratic isoparametric elements were used in all regions except the crack tip zone where triangular singular elements with 6 nodes were used. The results of SED were compared with the results of those which followed by the maximum circumferential tensile stress criteria and those by the maximum energy release rate criteria and those by Jenq and Shah`s experiments of the same geometry and material properties. The maximum energy release rate criteria were better close to those of the Jenq and Shah`s experiments than the maximum circumferential tensile stress criteria and the minimum strain energy density criteria.

• 한국해양공학회지
• /
• 제9권2호
• /
• pp.20-29
• /
• 1995

When structures are constructed by welding, structural elements are always accompained by welding residual stress and deformation. Therefore, when the rigidity and strength of the welded structures is considered, it is very important to have sufficient information about the effect of initial deflection and welding residual stress on them. In this paper, the square plates with welding residual stress under compression are dealt with; First, heat conduction and thermal elastic-plastic problems are analyzed by finite element method using 4-node isoparametric elements for assessment on the ultimate strength of welding joint. Later, the ultimate strength of welding joint is assessed by examining the effect of changed type of loading. The specimens are 500{\times}$500mm(a/b=1) and 750{\times}$500mm(a/b=1.5) rectangular plates of whichthicknesses is 9.0mm and simply supported plates getting axiul load in each direction.

• 한국재난정보학회 논문집
• /
• 제12권1호
• /
• pp.62-68
• /
• 2016

본 연구에서는 충격 문제를 거론하며 Mindlin 판 이론을 확장한 1차 전단 변형 이론에 근거하여 충격 하중을 받는 적층판의 응답 특성의 해석을 목적으로 아이소파라메트릭요소에 의한 정식화를 시도한다. 유한요소법을 이용하여 역대칭 Angle-Ply 적층판의 사각판과 원형판의 수치해석을 통해 정적해석과 동적해석의 결과를 도출하여 각 변위에 대한 분석결과를 비교한다.

• 오토저널
• /
• 제12권3호
• /
• pp.41-52
• /
• 1990

In this study are determined the unsteady temperature and thermal stress fields for a domestic 4-cylinder, 4-cycle gasoline engine cylinder head by the three-dimensional finite element method. A representative part of the cylinder head is modelled as a combination of hexahedron isoparametric elements, and the time-dependent temperature and the heat transfer coefficient of the gas are imposed as the thermal boundary conditions for the engine speeds of 500 rpm and 2000 rpm. The obtained results, which are represented graphically, indicate that the amplitudes of temperature fluctuation during a cycle are about 10.deg. C and 3.deg. C respectively on the surface of combustion chamber, and the maximum temperature fields occur at 30.deg. , 10.deg. respectively before the initiation of the exhaust stroke. Thermal stress fields due to non-uniform temperature distributions show that compressive stress is much larger than tensile stress throughout a cycle. It is also found that the compressive stress varies with substantial amplitude between the exhaust port and ignition plug hole, and the high tensile stress with small fluctuation occurs between exhaust port and the adjacent head bolt hole.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.201-208
• /
• 2000

A numerical analysis algorithm for thermally loaded structures has been proposed and compared with the general free vibration approach to determine the characteristics of thermal load effects in vibration structures. The field of numerical inspection includes free vibration analysis, transient heat transfer analysis and thermal stress analysis. The key point of the analysis of thermally loaded structure is the method of parallel time integration between transient heat transfer and free vibration simultaneously. The results of the study demonstrate the computation of the specific total external force vector and stiffness matrix. The proposed analysis method can be applied to both heated and cooled structure vibration analysis.

• Kyungpook Mathematical Journal
• /
• 제50권4호
• /
• pp.509-536
• /
• 2010

In this paper, we investigate curvature-adapted and proper complex equifocal submanifolds in a symmetric space of non-compact type. The class of these submanifolds contains principal orbits of Hermann type actions as homogeneous examples and is included by that of curvature-adapted and isoparametric submanifolds with flat section. First we introduce the notion of a focal point of non-Euclidean type on the ideal boundary for a submanifold in a Hadamard manifold and give the equivalent condition for a curvature-adapted and complex equifocal submanifold to be proper complex equifocal in terms of this notion. Next we show that the complex Coxeter group associated with a curvature-adapted and proper complex equifocal submanifold is the same type group as one associated with a principal orbit of a Hermann type action and evaluate from above the number of distinct principal curvatures of the submanifold.

• 대한토목학회논문집
• /
• 제9권2호
• /
• pp.11-22
• /
• 1989

등매개(等媒介) 요소(要素)를 사용(使用)하는 유한요소법(有限要素法)을 적용(適用)하여 직선상자항교(直線箱子桁橋) 강성해석(强性解析)을 수행(遂行)하였다. 이 방법(方法)의 유용성(有用性)과 정확성(正確性)을 보이기 위하여 하나의 연속상자형을 예로 들어 해석하였다. 여기서 구한 처짐과 종방향응력들은 다른 방법으로 구한 결과와 잘 일치함을 알 수 있었다. 본 방법은 임의의 경제조건과 하중을 받는 상자형을 해석하는데 효율적인 방법이며, 설계 해석에 직접 사용될 수 있는 실용적인 방법이다.