• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.3
• /
• pp.124-132
• /
• 2020

The purpose of this paper is to establish the basic procedure and method for selection of preferred anti-fouling paint considering economic analysis according to ship's speed loss based on ISO 19030 that has been published in 2016 to prescribe practical methods for measuring changes in ship specific hull and propeller performance. In this study, six (6) anti-fouling paint products have been assumed for alternatives with each target maximum average speed loss and carried out comparison of the alternatives and sensitivity analysis in assumed conditions for selection of the preferred alternative.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.758-767
• /
• 2007

Today, medical devices is making great progress in type of the electronic medical device controlled by embedded software. So, the quality of electronic medical devices is dependant on the quality of embedded medical software. Especially, considering that medical devices closely connected to human life, we think the study about reliability of medical devices will be needed in the quality of programmable electronic medical devices. In this thesis, we constructed the reliability evaluation method based on ISO/IEC 9126 and ISO/IEC 12119, and developed the system that can applicate FMEA method, the one of the reliability evaluation method.

• Nutritional Sciences
• /
• v.9 no.4
• /
• pp.240-247
• /
• 2006

In this study we investigated the neuroprotective, antioxidative, and hypocholestrolemic effects of dietary soy protein and soy isoflavone in a rat focal brain ischemia model. Weaning Sprague-Dawley rats were fed a 20% casein-based diet (CA), 20% soy protein-based diet (SP), or 0.2% soy isoflavones-supplemented diet (ISO) for 6 weeks. The cortical infarction volume of the ISO group was significantly lower than that of the SP group. The thiobarbituric acid reactive substances (TBARS) were considerably lower in the ISO group than the CA group. Glutatbione peroxidase activities of the SP group were notably higher than those of the CA group. Acetylcholinesterase (AchE) activities of the SP group were significantly decreased compared to the CA group. LDL cholesterol levels and LDL/HDL ratios of the ISO group were lower than those of the CA and SP groups. Our results collectively suggest that soy isoflavones may contribute to neuroprotection by reducing the TBARS and serum LDL/HDL ratio, whereas soy protein may be associated with the regulation of cognitive functions by modulating AchE activity.

• Archives of Pharmacal Research
• /
• v.26 no.9
• /
• pp.697-705
• /
• 2003

The alkylphenols, chlorophenols, and bisphenol A were determined by gas chromatography/mass spectrometry-selected ion monitoring (GC/MS-SIM) followed by two work-up methods for comparison: isobutoxycarbonyl (isoBOC) derivatization and tert-butyldimethylsilyl (TBDMS) derivatization. Eleven endocrine disrupting chemicals (EDCs) of phenols in biological samples were extracted with acetonitrile and then the acetonitrile layer underwent freezing filtration 6$0^{\circ}C$ for 2 hours. Solid-phase extraction (SPE) was used with XAD-4 and subsequent conversion to isoBOC or TBDMS derivatives for sensitivity analysis with the GC/MS-SIM mode. For isoBOC derivatization and TBDMS derivatization the recoveries were 92.3∼150.6% and 93.8∼108.3%, the method detection limits (MDLs) of bisphenol A for SIM were 0.062 $\mu$ g/kg and 0.010 $\mu$ g/kg, and the SIM responses were linear with the correlation coefficient varying by 0.9755∼0.9981 and 0.9908∼0.9996, respectively. When these methods were applied to mackerel samples, the concentrations of the 11 phenol EDCs were below the MDL.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.9-10
• /
• 2000

The wide viewing angle and fast response time characteristics of negative dielectric anisotropy nematic liquid crystal (NLC) using a novel vertical-alignment (VA) - 1/4 ${\pi}$ cell mode on a homeotropic alignment layer were investigated. Good voltage-transmittance curves and low driving voltage using the novel VA - 1/4 ${\pi}$ cell mode without a negative compensation film were obtained. The iso-viewing angle characteristics of NLC using the novel VA - 1/4 ${\pi}$ cell mode without a negative compensation film can be achieved. The fast response time of 24.4 ms in NLC was successfully measured. The iso-viewing angle, fast response time, and low driving voltage characteristics using the novel VA - 1/4 ${\pi}$ cell mode can be achieved.

• Journal of Korean Society for Quality Management
• /
• v.28 no.4
• /
• pp.106-118
• /
• 2000

We analyze the current quality management status for firms producing steel outfits of ships and develop an efficient QMS appropriate to Korean steel outfit industry. The firms recently obtained ISO 9000 certificates and are located in Pusan ${\cdot}$ Kyungnam district of Korea. The analysis is based on the audit results from ISO 9000 for seven steel outfit firms during last three years. We find out major requirements of ISO 9000 and investigate statistical relationship among major requirements, types of data, and groups of firms by using a statistical package, SAS. Recommendations regarding add-on requirements are suggested to install an efficient QMS in Korean steel outfit firms.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.09a
• /
• pp.1-4
• /
• 2001

In electrophoresis, it is studied to get best condition of suspension media with alcoholic system for superconducting film. High-temperature superconductor films of $YBa_{2}Cu_{3}O_{7-x}$ were fabricated by electrophoretic deposition(EPD) from alcohol-based suspension. Maximum stability is observed for the suspension containing iso-alcohol as dispersion medium. However, for the formation of a dense and adherent coating of YBCO on a silver substrate by EPD. the best results were obtained in mixing PrOH and BuOH suspension. The superconducting critical current density($J_c$) was $1,200A/cm^2$ for the films deposited in 30% iso-PrOH and 70 % iso-BuOH suspension.

• Journal of KSNVE
• /
• v.22 no.4
• /
• pp.28-32
• /
• 2012

Condition-based maintenance on wind turbines not only involves maintenance, but also encompasses servicing, inspection, measurement and evaluation of the condition of the unit. The current condition can be evaluated on the basis of machine-specific overall vibration values. Until now, overall vibration values had not been defined for wind turbines. In fact, ISO 10816-3 explicitly excludes wind power plants. The new VDI 3834 closes this gap shown in Sheet 1: Vibration values for wind turbines up to 3 MW. In addition to the new VDI 3834 is the ISO 10816-21 in preparation. The author of the article Dr. Edwin Becker is the nominated expert for Germany.

• Smart Media Journal
• /
• v.5 no.4
• /
• pp.57-62
• /
• 2016

By using personal health devices, a type of bio-censor at home and building, for telemedicine, this paper proposes a new method to protect more robust patient's privacy than before scheme [1] by ensuring the integrity and the secure transmission further when it communicates with gateway which collecting bio-information from them. As the suggested method is designed to conform with ISO/IEEE 11073-20601 [2], which is international standard, it considered interoperability with various health devices.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.262-266
• /
• 2011

본 연구에서는 건축물 내장 재료에 대한 연소독성평가와 독성지수연구로써 FT-IR을 이용한 연소가스분석실험을 하였다. 독성지수를 산정하기 위한 실험의 화재모델로 콘 칼로리미터 화재모델(KS F ISO/TR 9122-4)을 사용하였으며 ISO 19702의 절차에 따라 FT-IR을 이용하여 건축 재료의 연소로부터 발생되는 가스의 분석을 수행하였다. 국제규격에서 제시하고 있는 몇 가지 독성지수 산정법 중 ISO 13344에서 규정하는 방법에 따라 FED 값을 산정하였으며, 30분간 시험동물에 노출 시 대상의 50%가 사망하는 농도인 $LC_{50}$을 기준으로 하여 3가지 재료의 독성지수화를 통해 상대적인 독성 위험도를 평가하였다.