• Korean Journal of Clinical Pharmacy
• /
• v.5 no.2
• /
• pp.13-16
• /
• 1995

The Minimum Inhibitory Concentration (MIC) of a first-generation cephalosporin derivative, Cefazedone (CZD; $PAZERON^R$ inj.) was determined by the two-fold serial agar dilution method. The in-vitro antibacterial activity of CZD against a wide variety of clinical isolates was compared with those of other first generation cephalosporins such as Methylol Cephalexin (CEX), Cefazolin (CEZ), Cefadroxil (CDX), Cephradine (CED), Ceftezol (CTZ) and one of second generation cephalsporin antibiotics, Cefotaxime (CTX). CZD had the most potent inhibitory effect against Gram-positive strains, when compared to the first-generation cephalosporin antibiotics tested in this study and CTX. The geometric MIC mean of CZD for Gram-positive strains was calculated as 0.386 kg/m{\ell}$, and those of CEX, CEZ, CDX, CTZ, CED, and CTX were 6.073, 0.894, 3.399, 0.748, 7.884 and 1.502 $kg/m{\ell}$, respectively. In addition, the geometric mean of CZD for staphylococclJs aureus strains was obtained as 0.340 $kg/m{\ell}$ and those of CEX, CEZ, CDX, CTZ, CED, and CTX 6.145, 0.534, 4.126, 0.442, 10.51, and 2.500 $kg/m{\ell}$, respectively. Against Gram-negative strains, CZD showed better antibacterial activity than CEZ, CDX, CTZ, and CED.

• Journal of Technologic Dentistry
• /
• v.31 no.3
• /
• pp.27-34
• /
• 2009

This study compared and analyzed changes to the mechanical characteristics to nonprecious metal alloy for porcelain fused to metal crowns when it's repetitively used without the addition of new alloy. Metal samples were made with the Verabond V nonprecious metal alloy. Those samples to measure tensile and yield strength were made in the standardized design(ISO 22674), those to measure bond strength in the $25mm{\times}3mm{\times}0.5mm$ format, and those to measure hardness in the $10mm{\times}10mm{\times}1mm$ format. A ceramic to measure bond strength was made at the center of the metal sample in the length of $8{\ss}{\AE}$ by using Noritaker Super Porcelain EX-3. Ten samples were prepared for one, three and five repetitions of casting each. The test results were as follows: 1. The more casting was repeated, the more significantly tensile strength dropped. 2. The more casting was repeated, the more significantly yield strength dropped. 3. Repetitive casting didn't cause significant changes to bond strength. 4. The Vickers hardness significantly fell with increasing repetitions of casting. There were no changes to bond strength observed with the increasing number of repeating casting. But tensile strength, yield strength, and Vickers hardness decreased. Those results indicate that repeated casting can affect durability and that careful attention should be paid by avoiding repetitive use or excessive increase of uses when no new alloy is added.

• Journal of Technologic Dentistry
• /
• v.30 no.1
• /
• pp.17-23
• /
• 2008

Gypsum products are used for the preparation of stone casts of oral and maxillofacial structures and as important adjuncts to dental laboratory operations involved in the production of dental prosthesis. Accuracy and dimensional stability over time are properties of concern in fixed prothodontics. Gypsum products used in denstry are a form calcium sulfate hemihydrate and are classified as 1 of 5 types according to International Standard Organization(ISO) 6873. All die materials exhibit some dimensional change during setting, but expansion and contraction during setting and dimensional changes in response to varations in temperature and the water-powder ratio must be minimal. Although numerous investigators have studied the properties of die materials, several products have been introduced recently with manufacturer claims of superior dimensional stalility. The aim of this study was to determine the surface properties using various separating materials of dental gypsum products The results were as follows 1. In the comparison of first and second plaster distances before separation in different separating agent, there was no significant difference except using Trio separating agent. The interface using Trio separating agent forms like to pores. 2. In the comparison of first and second plaster distances after separation in different separating agent, there was significant difference. The interface of plasters using WD-40, Trio and Vaseline was showed some gaps. Each they were measured at average 7.97 $\pm$ 2.07 ${\mu}m$, 63.09 $\pm$ 23.25 ${\mu}m$, 27.59 $\pm$ 4.19 ${\mu}m$. 3. In the comparison of the surface, the surface of control sample(using none seperating agent) showed irregular properties and the surface using Trio and Vaseline become wrinkled. Specially the surface using Vaseline was showed shiny properties. But the surface using MAGIC SEP, Plaster seperating agent, WD-40 showed regular properties.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2272-2281
• /
• 1997

This paepr proposes a shared medium access control protocol for hgih-speed multimedia services of distributed subscriber home and small-sized business ATM networks. This protocol offers not only global fairness for the whole network at the same time, but also local fairness for different prioritytraffics on each node. Considering that the future B-ISDN service si a mixture of real and non-real time traffic data, this protocol is designed to accommodate the real time service, by controlling the priority of the real and non-real time data. The simulation results show that the proposed protocol has better performance than the other protocols.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.4 s.34
• /
• pp.75-81
• /
• 2005

This study intended to show the way of evolving 'National Geographic Information Clearinghouse' to 'National Integrated Geospatial Portal'. For this purpose we have analyzed Geospatial One-Stop Portal in the US and then suggested future model of National Geographic Information Clearinghouse. The Integrated Geospatial Portal model is based on the Reference Model for Open Distributed Processing(RM-ODP) which is an international model for information distribution and sharing. The Integrated Geospatial Portal architecture consists of the data layer, middle-ware, presentation layer. It will help users to determine their fitness for nation wide GIS application and provide tools for accessing, visualizing, or ordering various geospatial data.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.1
• /
• pp.110-120
• /
• 1986

45.deg. corss jet flow, at the mixing of two jet flows, was experimentally studied. For this study, only the statistical turbulent characteristics and high order moments will be analysed by on-line computer system (hot-wire anemometer system, dynamic analyser and computer system, plotting and printing system). Since mean velocity distributions, intensities of turbulence, Reynolds stresses, correlation coefficients, and other general results were already studied and presented. One dimensional probability density distributions of u', v', and w' were analysed comparing with Gaussian curve, which showed skew and flat tendency according to the Y and Z directions. For the analysis of the joint flow of turublent components, the joint probability density distributions were examined. The fagures were drawn so as to be read joint probabilities, joint probability densities, fluctuating velocities u', v', and w'. For further detailed examination of the variations of skewness and flatness phenomena, iso-joint probability density contours obtained from the profiles of the joint probability density distributions were studied. According to the displacement of positions from the center of the mixing flow and the directions, the flatness and skewness factors were increased.

• Journal of Integrative Natural Science
• /
• v.1 no.3
• /
• pp.195-209
• /
• 2008

Some Korean terminologies on reproductive structures of seed plants in plant morphology, written incorrectly in many books, were analysed to propose accurately expressed terminologies. 31 books in areas such as general biology, plant biology, plant morphology, and biological dictionaries and glossaries were selected to analyse the accuracy of the terminologies for reproductive structures in gymnosperms, e.g., cone or strobilus, seed (or ovulate) cone and pollen cone, and conifer(s) or coniferous plants, and for flower structures in angiosperms, e.g., corolla, anther, filament, pistillate (or female) flower and staminate (or male) flower, apocarpous, and syncarpous. The definition and etymology of the terminologies were traced in 4 textbooks of plant anatomy and 2 dictionaries of biology and botany written in English. On the basis of the definition, etymology, and principles for terminology formation according to the International Organization for Standardization (ISO 704:2000), reasonably expressed Korean terminologies were proposed. All of the 8 terminologies examined in this study were included in the glossary of biological terminologies, published by the Korean Association of Biological Sciences in 2005, and designated as an editorial source for science and biology textbooks for middle and high schools by Ministry of Education in 2007. However, the only 1 of the 8 terminologies described in the glossary were consistent with the proposed expression in the present study. These inconsistencies indicated the need for a reassessment of this glossary of biological terminologies. The newly proposed terminologies would facilitate mutual understanding between teachers and students of plant biology.

• Journal of Integrative Natural Science
• /
• v.1 no.3
• /
• pp.234-246
• /
• 2008

Korean terminologies on stem structures in plant morphology, written incorrectly in many books, were analysed to propose accurately expressed terminologies. 35 books in areas such as general biology, plant biology, plant morphology, and biological dictionaries and glossaries were selected to analyse the accuracy of the terminologies for seed structures, e.g., shoot and shoot system, rhizome, apical dominance, anticlinal and periclinal divisions, and intercalary and lateral meristems. The definition and etymology of the terminologies were traced in 4 textbooks of plant anatomy and 2 dictionaries of biology and botany written in English. On the basis of the definition, etymology, and principles for terminology formation according to the International Organization for Standardization (ISO 704:2000), reasonably expressed Korean terminologies were proposed. All of the 8 terminologies examined in this study were included in the glossary of biological terminologies, published by the Korean Association of Biological Sciences in 2005, and designated as an editorial source for science and biology textbooks for middle and high schools by Ministry of Education in 2007. However, the only 1 of the 8 terminologies described in the glossary were consistent with the proposed expression in the present study. These inconsistencies indicated the need for a reassessment of this glossary of biological terminologies. The validity of the proposed Korean terminologies was tested in a questionnaire sent to 17 professors teaching plant morphology or/and taxonomy at universities. A mean of 91.9% of the total respondents agreed with the Korean expressions proposed in this study. The new, proposed terminologies would facilitate mutual understanding between teachers and students of plant biology.

• Journal of the Korea Furniture Society
• /
• v.24 no.4
• /
• pp.433-443
• /
• 2013

The furniture industry of the northern region of Gyeonggi Province consists of several regional complexes which was just autogenously, that is, not based on the organized and planned movements cultivated and clustered, so it stays small businesses. This fact certainly requires to find right courses for future policy direction, in order to develop the furniture industry centering in the northern region of Gyeonggi Province internationally competitive. Consequently the aim of the present study was to investigate the characteristics of the furniture industry in the northern region of Gyeonggi Province first and to present right development directions for the innovation of the structure of furniture industry according to the change of the times, i.e. to connect the industry, university and the authorities concerned well and to strengthen the technology level of furniture industry accordingly. In addition, this requires education and training of the excellent designers being able to create high added-value industrial sectors, including finding a new Korean national brand which should preoccupy the global market. Furthermore, the high-tech furniture industrial complex specialized in manufacture, distribution and marketing such as the division of work between business to business should be built and finally a Korean traditional & unique furniture culture should be created on the basis of a cultural approach of furniture industry. It would be the timing for entire business sectors related to Korea's furniture industry to establish an international standard certification like ISO, in order to upgrade the quality of furniture steadily while keeping our own tradition, and this belongs to a meaningful attempt for the high-tech lifestyles and the improvement in the quality of life of customers.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.6
• /
• pp.885-892
• /
• 2011

In this study, LCA(Life Cycle Assessment) on 'Saemangum CSO Project' was carried out to evaluate environmental impact which occurred during the construction and operation periods and the potential environmental impact reduction was analyzed by comparing production and reduction level of pollution loads. LCA was conducted out according to the procedure of ISO14040 which suggested Goal and Scope Definition, Life Cycle Inventory Analysis, Life Cycle Impact Assessment and Interpretation. In the Goal and Scope Definition, the functional unit was 1 m3 of CSO, the system boundary was construction and operation phases, and the operation period was 20 years. For the data collection and inventory analysis, input energies and materials from civil, architecture, mechanical and electric fields are collected from design sheet but the landscape architecture field is excepted. LCIA(Life Cycle Impact Assessment) was performed following the procedure of Eco-Labelling Type III under 6 categories which were resource depletion, eutrophication, global warming, ozone-layer destruction, and photochemical oxide formation. In the result of LCA, 83.4% of environmental impact occurred in the construction phase and 16.6% in the operation phase. Especially 78% of environmental impact occurred in civil works. The Global warming category showed the highest contribution level in the environmental impact categories. For the analysis on potential environmental impact reduction, the reduction and increased of environmental impact which occurred on construction and operation phases were compared. In the case of considering only the operation phase, the result of the comparison showed that 78% of environmental impact is reduced. On the other hand, when considering both the construction and operation phases, 50% of environmental impact is increase. Therefore, this study showed that eco-friendly material and construction method should be used for reduction of environmental impact during life cycle, and it is strongly necessary to develop technology and skills to reduce environmental impact such as renewable energies.