• 한국표면공학회지
• /
• 제32권3호
• /
• pp.393-400
• /
• 1999

The surface characteristics of nitrogen ion implanted iron aluminides were investigated using various electrochemical methods in $H_2$$SO_4$+KSCN and HCl solutions. Nitrogen ion implantation was performed with doses of $3.0$\times$10^{17}$ /ions/$\textrm{cm}^2$ at an energy of 150keV. Nitrogen ion implanted iron aluminides increased the corrosion potential and significantly decreased grain boundary activation, the active current density, and passive current density. Nitrogen implanted iron aluminides with Mo increased the corrosion, pitting potential, repassivation potential and │$E_{pit}$-$E_{corr}$│ value. Whereas, implanted iron aluminides containing boron reduced the pitting and repassivation potential in comparison with nitrogen implanted iron aluminides with Cr and Mo.o.

• 상하수도학회지
• /
• 제21권4호
• /
• pp.375-383
• /
• 2007

Treatment efficiency research was performed using Fenton process and the electrochemical process in the presence of ferrous ion and hydrogen peroxide for the industrial wastewater including 1,4-Dioxane produced during polymerization of polyester. The Fenton process and the electrochemical Iron Redox Reaction (IRR) process were applied for this research to use hydroxyl radical as the powerful oxidant which is continuously produced during the redox reaction with iron ion and hydrogen peroxide. The results of $COD_{Cr}$ and the concentration of 1,4-Dioxane were compared with time interval during the both processes. The rapid removal efficiency was obtained for Fenton process whereas the slow removal efficiency was occurred for the electrochemical IRR process. The removal efficiency of $COD_{Cr}$ for 310 minutes was 84% in the electrochemical IRR process with 1,000 mg/L of iron ion concentration, whereas it was 91% with 2,000 mg/L of iron ion concentration. The lap time to remove all of 1,4-Dioxane, 330 mg/L in the wastewater took 150 minutes with 1,000 mg/L of iron ion concentration, however it took 120 minutes with 2,000 mg/L of iron ion concentration in the electrochemical IRR process.

• Biomolecules & Therapeutics
• /
• 제10권4호
• /
• pp.293-302
• /
• 2002

The classical concept for iron uptake into mammalian cells has been the endocytosis of transferrin( $T_{f}$ )-bound F $e^{3+}$ via the $T_{f}$ - $T_{f}$ receptor cycle. In this case, we could not explain the uptake of F $e^{2＋}$ ion and the export of iron from endosome. Studies on iron transport revealed that other transport system exists in epithelial cells of the intestine. One of non- $T_{f}$ -receptor-mediated transport systems is Nramp2/DMT1/DCT1 which transports M $n^{＋＋}$, $Mg^{＋＋}$, Z $n^{＋＋}$, $Co^{＋＋}$, N $i^{＋＋}$ or C $u^{＋＋}$ ion as well as F $e^{+2}$ ion. DMT1 was cloned from intestines of iron-deficient rats and shown to be a hydrogen ion-coupled iron transporter and a protein regulated by absorbed dietary iron. DMT1 is founded in other cells such as cortical and hippocampal glial cells as well as endothelial cells in duodenum. Two F $e^{3+}$ ion bound to transferrin( $T_{f}$ ) are taken up via the $T_{f}$ - $T_{f}$ receptor cycle in the intestinal epithelial cell. F $e^{3+}$ in endosome was converted to F $e^{2＋}$ ion, and then exported to cytosol via DMT1. F $e^{2＋}$ ion is taken up into cytosol via DMT1. Several other transporters such as FET, FRE, CCC2, AFT1, SMF, FTR, ZER, ZIP, ZnT and CTR have been reported recently and dysfunction of the transporters are related with diseases containing Wilson's disease, Menkes disease and hemochromatosis. Evidences from several studies strongly suggest that DMT1 is the major transporter of iron in the intestine and functions critically in transport of other metal ions.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3665-3676
• /
• 2023

The use of ion exchange resins to remove ionic impurities from solution is prevalent in industrial process systems, including in the primary heat transport system (PHTS) purification circuit of nuclear power plants. Despite its extensive use in the nuclear industry, our general understanding of ion exchange cannot fully explain the complex chemistry in ion exchange beds, particularly when operated at or near their saturation limit. This work investigates the behaviour of mixed-bed ion exchange resin, saturated with species representative of corrosion products in a CANDU (Canadian Deuterium Uranium) reactor PHTS, particularly with respect to iron chemistry in the resin bed and the removal of lithium ions from solution. Experiments were performed under deaerated conditions, analogous to normal PHTS operation. The results show interesting iron chemistry, suggesting the hydrolysis of cation resin bound ferrous species and the subsequent formation of either a solid hydrolysis product or the soluble, anionic Fe(OH)₃^-.

• 대한화학회지
• /
• 제56권6호
• /
• pp.673-678
• /
• 2012

변전위법과 선형분극법을 이용하여 Borate 완충용액에서 철의 부식에 대한 대기의 영향을 조사하였다. 철의 부식은 용액 속에 녹아있는 산소의 양에 크게 영향을 받았다. 용액에 녹아 있는 산소의 환원반응으로 환원전류가 증가하여 부식전위가 양의 방향으로 이동하였다. 물 또는 산소의 환원 반응에 의하여 생성된 $OH^-$ 이온은 철 전극의 전기이중층에 $OH^-$ 이온의 농도를 증가시켜 철 전극에 $OH^-$ 이온의 흡착을 용이하게 하였다. 철 전극 표면에 $OH^-$ 이온의 흡착은 Langmuir isotherm 또는 Temkin logarithmic isotherm을 이용하여 설명할 수 있었다.

• Environmental Engineering Research
• /
• 제20권3호
• /
• pp.205-211
• /
• 2015

Reduced forms of iron, such as zero-valent ion (ZVI) and ferrous ion (Fe[II]), can activate dissolved oxygen in water into reactive oxidants capable of oxidative water treatment. The corrosion of ZVI (or the oxidation of (Fe[II]) forms a hydrogen peroxide ($H_2O_2$) intermediate and the subsequent Fenton reaction generates reactive oxidants such as hydroxyl radical ($^{\bullet}OH$) and ferryl ion (Fe[IV]). However, the production of reactive oxidants is limited by multiple factors that restrict the electron transfer from iron to oxygen or that lead the reaction of $H_2O_2$ to undesired pathways. Several efforts have been made to enhance the production of reactive oxidants by iron-induced oxygen activation, such as the use of iron-chelating agents, electron-shuttles, and surface modification on ZVI. This article reviews the chemistry of oxygen activation by ZVI and Fe(II) and its application in oxidative degradation of organic contaminants. Also discussed are the issues which require further investigation to better understand the chemistry and develop practical environmental technologies.

• Bulletin of the Korean Chemical Society
• /
• 제23권7호
• /
• pp.943-947
• /
• 2002

The two reactions between iron ion (Fe3+ ) and o-chlorophenylfluorone (o-CPF) and copper ion (Cu2+ ) and o-CPF are sensitive at pH 6 in the presence of Triton X-100. We have determined the formation constants of the complexes by the spectral correction technique. Because of the poor selectivity of o-CPF to metals, the competition coordination of only the iron ion from the Cu-o-CPF complex was found and applied to the selective detection of iron traces by the Selective Competition Coordination Determination (SCCD) approach.The analysis of several samples shows that the relative standard deviations are less than 5.0% and the recovery of iron ions between 94.5% and 106%.

• 한국식품저장유통학회지
• /
• 제6권1호
• /
• pp.115-120
• /
• 1999

This study was carried out to investigate the effect of Pine needle extract on lipid oxidation and free radical reaction in iron sources reacted with active oxygen species. The results were summarized as follow; The pine needle extracts didn`t show a distinct effect on reduction of lipid oxidation if the iron ion didn`t exist in oil emulsion. The pine needle extracts played role as a strong chelating agents to bind iron ion if Ferrous iron(Fe\ulcorner) exist in oil emulsion. Ferric iron(Fe) was lower effect than Ferrous iron(Fe) on free radical reaction in oil emulsion. And also, the Fe\ulcorner reacted with pine needle extract did not show distinct effect on free radical reaction, compared to Fe\ulcorner reacted with pine needle extract. And also, Pine needle extracts reacted with H\ulcornerO\ulcorner were tended to show a low oxygen scavenging ability in case of H\ulcornerO\ulcorner only was existed, compared to those of H\ulcornerO\ulcorner + Fe\ulcorner complex. Pine needle extracts were the most powerful Fe\ulcorner binding agents, compared to other strong synthetic antioxidants such as EDTA and DTPA.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권4호
• /
• pp.35-39
• /
• 2016

In recent years, high-temperature superconductor (HTS) Quadruple Triplets are being developed for heavy ion accelerators, because the HTS magnets are suitable to withstand radiation and high heat loads in the hot cell of accelerators. Generally, an iron yoke, which costs a mass of material, was employed to enhance the magnetic field when a quadrupole magnet was designed. The type of the magnet is called iron-dominated magnet, because the total magnetic field was mainly induced by the iron. However, in the HTS superconductor iron-dominated magnets, the coil-induced field also can have a certain proportion. Therefore, the air-core HTS quadrupole magnets can be considered instead of the iron-core HTS quadrupole magnet to be employed to save the iron material. This study presents the design of an air-core HTS quadruple triplet which consists three by air-core HTS quadruple magnet and compare the design result with that of an iron-core HTS quadruple triplet. First, the characteristics of an air-core HTS quadrupole magnet were analyzed to select the magnet system for the magnetic field uniformity impairment. Then, the field uniformity was improved(< 0.1%) exactly using evolution strategy (ES) method for each iron-core HTS quadrupole magnet and the air-core HTS quadruple triplet was established. Finally, the designed air-core triplet was compared with the iron-core HTS quadruple triplet, and the results of beam trajectories were presented with both the HTS quadruple triplet systems to show that the air-core triplet can be employed instead of the iron-core HTS triplet. The design of the air-core quadruple triplet was suggested for a heavy ion accelerator.

• Carbon letters
• /
• 제11권2호
• /
• pp.117-121
• /
• 2010

The composites of alginate, carbon nanotube, and iron(III) oxide were prepared for the removal of heavy metal in aqueous pollutant. Both alginate and carbon nanotube were used as an adsorbent material and iron oxide was introduced for the easy recovery after removal of heavy metal to eliminate the secondary pollution. The morphology of composites was investigated by FE-SEM showing the carbon nanotubes coated with alginate and the iron oxide dispersed in the alginate matrix. The ferromagnetic properties of composites were shown by including iron(III) oxide additive. The copper ion removal was investigated with ICP AES. The copper ion removal efficiency increased greatly over 60% by using alginate-carbon nanotube composites.