DOI QR코드

DOI QR Code

Design of an Air-Core HTS quadruple triplet for a heavy ion accelerator

  • Received : 2016.11.10
  • Accepted : 2016.12.23
  • Published : 2016.12.31

Abstract

In recent years, high-temperature superconductor (HTS) Quadruple Triplets are being developed for heavy ion accelerators, because the HTS magnets are suitable to withstand radiation and high heat loads in the hot cell of accelerators. Generally, an iron yoke, which costs a mass of material, was employed to enhance the magnetic field when a quadrupole magnet was designed. The type of the magnet is called iron-dominated magnet, because the total magnetic field was mainly induced by the iron. However, in the HTS superconductor iron-dominated magnets, the coil-induced field also can have a certain proportion. Therefore, the air-core HTS quadrupole magnets can be considered instead of the iron-core HTS quadrupole magnet to be employed to save the iron material. This study presents the design of an air-core HTS quadruple triplet which consists three by air-core HTS quadruple magnet and compare the design result with that of an iron-core HTS quadruple triplet. First, the characteristics of an air-core HTS quadrupole magnet were analyzed to select the magnet system for the magnetic field uniformity impairment. Then, the field uniformity was improved(< 0.1%) exactly using evolution strategy (ES) method for each iron-core HTS quadrupole magnet and the air-core HTS quadruple triplet was established. Finally, the designed air-core triplet was compared with the iron-core HTS quadruple triplet, and the results of beam trajectories were presented with both the HTS quadruple triplet systems to show that the air-core triplet can be employed instead of the iron-core HTS triplet. The design of the air-core quadruple triplet was suggested for a heavy ion accelerator.

Keywords

References

  1. J. P. Cozzolino et al., "Engineering Design of HTS Quadrupole For FRIB Accelerator Technology," TUP162, Proceedings of Particle Accelerator Conference, New York, USA, 2011.
  2. Z. Zhang, S. Wei and S. Lee et al., "Harmonic Analysis and Field Quality Improvement of an HTS Quadrupole Magnet for a Heavy Ion Accelerator," Progress in Superconductivity and Cryogenics, vol.17, No.2, pp. 21-24, 2016.
  3. H. Takeda et al., "Extraction of 3D field maps of magnetic multipoles from 2D surface measurements with applications to the optics calculations of the large-acceptance superconducting fragment separator BigRIPS," Nuclear Instruments and Methods in Physics, Research B317 pp. 798-809, 2013. https://doi.org/10.1016/j.nimb.2013.08.052
  4. A. Kalimov and P. Nalimov, "Optimization of the Pole Shape of Quadrupole Magnets by MULTIMAG," IEEE Trans. App. Supercond., Vol.16, p1282, 2006. https://doi.org/10.1109/TASC.2005.864356
  5. S. S. Chouhan et al, "Superferric Warm Iron Quadrupole Magnets for FRIB Fragment Separator," IEEE Trans. App, vol. 25, No. 3, pp. 1-5, 2015.
  6. J .J. Muray, "Effective Length Measurement for Quadrupole Magnets," SLAC-TN-63-010, 1963.
  7. Zhan Zhang, Sangjin Lee et al., "A Study on the Optimization of an HTS Quadrupole Magnet System for a Heavy Ion Accelerator Through Evolution Strategy," IEEE Trans. Appl. Supercond., vol. 26, pp. 1-4, 2016.
  8. Z. Zhang, S. Lee and H. Jo et al., "Magnetic Field characteristics from HTS Quadruple Magnet of In-Flight Separator for a Heavy Ion Accelerator," Progress in Superconductivity and Cryogenics, vol. 17, No.3, pp. 23-27, 2015. https://doi.org/10.9714/psac.2015.17.3.023
  9. N. Hansen, The CMA Evolution Strategy: A Tutorial, 2011.

Cited by

  1. Analysis of magnetic field harmonics change due to manufacturing error in air-core HTS quadruple magnet vol.98, pp.None, 2016, https://doi.org/10.1016/j.cryogenics.2018.07.002
  2. Measurement of Magnetic Field Properties of a 3.0 T/m Air-Core HTS Quadrupole Magnet and Optimal Shape Design to Increase the Critical Current Reduced by the Incident Magnetic Field vol.9, pp.3, 2020, https://doi.org/10.3390/electronics9030450