• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.58-59
• /
• 2006

Less than a decade ago, most alternate membrane materials for fuel cells relied upon a post-sulfonation process to generate ionic groups capable of transporting protons from the anode to the cathode. These random post sulfonations showed some promise, but in general they produced materials that were not sufficiently stable or protonically conductive at ion exchange capacities where aqueous swelling could be restricted. Our group began to synthesize disulfonated monomers that could be used to incorporate into random copolymer proton exchange membranes. The expected limitation was that the aromatic polymers might not be stable enough to withstand fuel cell conditions. However, this was mostly based upon an accelerated test known was the Fenton's Reagent Test, which did not seem to this author as being a reliable predictor of performance. A much better approach has been to evaluate the open circuit voltage (OCV) for alternate membranes, as well as the benchmark perfluorosulfonic acid systems. When this is done, the aromatic ionomers of this study, primarily based upon disulfonated polyarylene ether sulfones, show up quite well. Real time 3000 hours DMFC results have also been generated. Obtaining conductive materials at low humidities is another major issue where alternate membranes have not been particularly successful. In order to address this problem, multiblock copolymers with relatively high water diffusion coefficients have been designed, which show promise for conductivity at lowered humidity.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.614-618
• /
• 2005

The complex of the composition LaL(N$O_3)_3\;(H_2O)_2$ is prepared by the reaction of La($NO_3)_3{\cdot}6H_2O$ with Nethylmorpholine in aqueous medium. The ligand is involved in the complex as a neutral species where the chelation occurs via the oxygen of the ligand moiety and the nitrate groups as bidentate ligand. The chemical structure of the studied complex is confirmed through IR, XRD, and thermal analysis data. The complexation equilibria of La(III) with N-ethylmopholine is studied in aqueous medium at ionic strength I = 0.1 mol${\cdot}dm^{-3}\;KNO_3$ and at 25, 35 and 45 ${^{\circ}C}$, respectively. The thermodynamic parameters $\Delta$G, $\Delta$H and $\Delta$S values were calculated to prove the association with the complex formation. It is clearly observed that the process is accompanied by absorption of heat, i.e. endothermic process, while the entropy does not change greatly attributed to the release of constant number of water molecules during chelate formation.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3771-3776
• /
• 2013

1-Alkyl-3-methylimidazolium chloride-LiCl melts were prepared from the reaction of 1-alkyl-3-methylimidazolium chloride ([RMIm]Cl; R=allyl or n-butyl) and lithium chloride, and their ability to dissolve cellulose was evaluated. The solubility of cellulose was greatly increased to 320% when [RMIm]Cl was replaced by [RMIm][$LiCl_2$]. Dissolved cellulose in LiCl/[RMIm]Cl melts was successfully regenerated by adding water and LiCl/[RMIm]Cl melts were easily recovered by removing water. As supported by the computational results, the higher solubility of cellulose in [RMIm][$LiCl_2$] can be ascribed to the increased bond distance between anion and C(2)-H of the imidazolium ring compared with that in [RMIm]Cl, thereby resulting in the increased interaction between $[LiCl_2]^-$ and the hydroxyl groups of cellulose.

• YAKHAK HOEJI
• /
• v.49 no.5
• /
• pp.422-427
• /
• 2005

Our previous data showed the protein isolated from Coptidis Rhizoma (CRP) had antifungal activity. In present study, we examined mode of action of the CRP and its activity against subcutaneous candidiasis due to C. albicans yeast cells. Results showed that the CRP blocked hyphal production from yeast form of C. albicans. The CRP also activated RAW 264.7 monocyte/macrophage cell line, which resulted in nitiric oxide (NO) production from the cells. This activation seemed to increase macrophage phagocytosis to destroy the invaders. Like other antimicrobial peptides, CRP was influenced by ionic strength, thus resulting in a decrease of antifungal activity. In murine model of a subcutaneous candidiasis, the sizes of infected areas of the nude mice given the CRP after subcutaneous injection of C. albicans yeast cells to the dorsal skin were $90\%$ less than those of the nude mice groups that received DPBS instead of the CRP. All data indicate that the CRP, which appeared to act like an antimicrobial peptide and to inhibit the morphological transition from blastoconidia, was effec­tive against the subcutaneous disease.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.4
• /
• pp.161-167
• /
• 2002

For the purpose of applying to micro-actuator, thermal properties and displacement of electrostrictive polyurethane(PU) elastomers have been measured. In order to understand an effect of PU component, crosslinking agent are controlled by 0.5 wt% and 1 wt%. DMPA and anther chain extenders were used. PU sample that chain extenders are DMPA is added NaOH for comprehension of effect of ionic groups. The deposited electrode sire on PU films is equal to acrylic holder size when the displacement was measured. Dynamic response according to frequency, displacement and recovery time according to PU thickness were measured. 1 wt% crosslinking agent contents PU samples have higher displacement and lower recovery time than 0.5 wt% crosslinking agent contents PU. If the PU thickness is increased, the actuating voltage for generating of same displacement is increased, too.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.04a
• /
• pp.55-56
• /
• 1994

There has been many attempts to improve the membrane performance using pervaporation processes[l-3]. They are 1) blending polymer with the high flux and one with high selectivity, 2) an incorporation of functional groups interacting with permeants into a membrane through copolymerization or modification, 3) composite membrane or asymmetric membrane structure with a thin skin layer which acts as a selective layer. Among them, a polymeric membrane containing ion complex group receives an extensive attention recently because ionic complex is known to activate the water transport through ion-dipole interaction. It is especially advantageous in the separation of organic-water system. We applied the ideas of the activation of water transport through ion-dipole. We have reported on the in-sire complex membrane to separate water from aqueous aceiic acid and pyridme solution[4-5] based on the simple acid-base theory. Water transport was enhanced through in-situ complex between pyridine moiety in the membrane and the incoming acetic acid in the feed. In this case, catalytic transport mechanism was proposed. In the present study we used pyridine solution as a feed and the sulfonic acid group in the membrane.

• Electrical & Electronic Materials
• /
• v.7 no.1
• /
• pp.32-41
• /
• 1994

In this study, the TSC spectroscopy has been applied to investigate the influence of structural change due to a process of curing reaction on the electrical properties of epoxy composites cured with acid-anhydride. Five TSC peaks appeared in -160-250[.deg.C]: in the low temperature region below glass transition temperature(T$\_$g/), three relaxation mode peaks due to action of side chains, substitution group or terminal groups have been observed, a peak associated with T$\_$g/, appeared in 110[.deg. C] and p peak due to ionic space charges located in 150[.deg.C]. Each peak was separated into elementary peaks by the partial polarization procedure, and the distribution of activation energy and relaxation time were analized to clearify the origin of each peak. Also, overaboundantly added hardener separated a .betha. peak near 10[.deg. C] into two peaks of .betha.$\_$1/(10.deg. C) and .betha.$\_$2/(20.deg. C) according to increasement of forming field, and the separated hardener was oxidated thermally with increasing surrounding temperatures. The expansion of the free volume need in molecular motion and the reduction of the structural packing density through thermal oxidation process increased TSC between .alpha. peak and .betha. peak and decreased T$\_$g/.

• Korean Journal of Pharmacognosy
• /
• v.4 no.4
• /
• pp.173-179
• /
• 1973

Tobacco, which has nicotine for its main component, has been in medical use for a long time and in great demand for smoking throughout the world. The purpose of this study is to control nicotine amount and to increase yield more efficiently by the method of systematic variations. Nutrient solutions for tobacco culture were designed and prepared in 10 kinds with mineral ions: $NO_{3^-},\;SO_{4^{--},\;PO_4{^{-3},\;K,{^+}\;Ca,{^{++}\;Mg,{^{++}$, Mn, B, Cu, Zn, Mo, and Fe. Nicotiana tabacum L. Yellow Special A, grown for 50days from sowing, was replanted in plastic pot and cultured for 65 days supplying with prepared nutrient solutions. After harvest, their nicotine amount was determined by means of acid-base titrimetry and gas chromatography. The tobacco plants in KCa 4 and KMg 9 groups demonstrated the highest yield in total leaves weight and KMg 7 group in average nicotine amount. They have shown the increase of nicotine amount from lower leaf to 16th leaf, and thereafter decreased gradually. The author also pursued the optimum ionic proportions for the absolute nicotine amount in tobacco by means of systematic variations method.

• Carbon letters
• /
• v.15 no.1
• /
• pp.38-44
• /
• 2014

This paper reports the effect of adding reduced graphene oxide (RGO) as a conductive material to the composition of an electrode for capacitive deionization (CDI), a process to remove salt from water using ionic adsorption and desorption driven by external applied voltage. RGO can be synthesized in an inexpensive way by the reduction and exfoliation of GO, and removing the oxygen-containing groups and recovering a conjugated structure. GO powder can be obtained from the modification of Hummers method and reduced into RGO using a thermal method. The physical and electrochemical characteristics of RGO material were evaluated and its desalination performance was tested with a CDI unit cell with a potentiostat and conductivity meter, by varying the applied voltage and feed rate of the salt solution. The performance of RGO was compared to graphite as a conductive material in a CDI electrode. The result showed RGO can increase the capacitance, reduce the equivalent series resistance, and improve the electrosorption capacity of CDI electrode.

• Macromolecular Research
• /
• v.14 no.1
• /
• pp.101-106
• /
• 2006

The transport of reactant gas, electrons and protons at the three phase interfaces in the catalytic layers of membrane electrode assemblies (MEAs) in proton exchange, membrane fuel cells (PEMFCs) must be optimized to provide efficient transport to and from the electrochemical reactions in the solid polymer electrolyte. The aim of reducing proton transport loss in the catalytic layer by increasing the volume of the conducting medium can be achieved by filling the voids in the layer with small-sized electrolytes, such as dendrimers. Generation 1.5 and 3.5 polyamidoamine (PAMAM) dendrimer electrolytes are well-controlled, nanometer-sized materials with many peripheral ionic exchange, -COOH groups and were used for this purpose in this study. The electrochemically active surface area of the deposited catalyst material was also investigated using cyclic voltammetry, and by analyzing the Pt-H oxidation peak. The performances of the fuel cells with added PAMAM dendrimers were found to be comparable to that of a fuel cell using MEA, although the Pt utilization was reduced by the adsorption of the dendrimers to the catalytic layer.