• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.4
• /
• pp.439-458
• /
• 2005

An automated analysis system for water soluble constituents in $PM_{2.5}$ has been developed. The system consists of a high capacity multi tube diffusion scrubber (MTDS), a low temperature particle impactor (LTPI), and two ion (anion and cation) chromatography (IC) systems. Atmospheric particles have been collected by passing sample air through a thermostated MTDS followed by a LTPI. This system allows simultaneous measurements of soluble ions in $PM_{2.5}$ at 30 minutes interval. At the air sampling flow rate of 1.0L/min, the detection limits of the overall system are in the order of tens of $ng/m^3$. This system has been successfully used for the measurement of particulate components of Seoul air from April 2003 to January 2004. $SO_4^{2-},\;NO_3^-,\;NH_4^+,\;NO_2^-,\;Cl^-,\;Na^+,\;K^+,\;Ca^{2+},\;and\;Mg^{2+}$ are the major ionic species for $PM_{2.5}$ at Seoul. Among them, $SO_4^{2-},\;NO_3^-\;and\;NH_4^+$ are the most abundant ions, contributed up to $86\%$ of the total and the concentrations were higher than those in any other urban sites in the world except for Chinese cities. There are high pollutant episodes which contribute about $15\~20\%$ of annual average values of the major ions. During the episode, the all parcels were transported from the asian continent and $PM_{2.5}$ were significantly neutralized. This suggests that aged and long range transported pollutants caused the high pollutant episodes. They showed a distinct daily and seasonal variations:they showed a peak in the early morning caused by the night-time accumulation of particulate matters. Atmospheric reactions including gas-to-particle reactions and inter-particle reactions and meteorological parameters including relative humidity and ambient temperature were described with related to the $PM_{2.5}$ 5 concentrations. All of the ionic species showed higher concentrations during the spring than those for summer and winter.

• Clean Technology
• /
• v.26 no.3
• /
• pp.177-185
• /
• 2020

All coal ash, generated from coal-fired power plants, is entirely dumped onto a landfill site. As coal ash contains 80% fly ash, a clean floating process was developed in this study to recover useful components from coal ash and to use them as high value-added industrial materials. When the unburned carbon (UC) was recovered from the fly ash, soybean oil, an eco-friendly vegetable oil, was used as collector instead of a non-ionic kerosene collector to prevent the occurrence of odor from the kerosene. After the UC was separated by flotation, particulate ceramic microsphere (CM) was recovered, without generating acidic wastewater, through hydro-cyclone instead of sulfuric acid solution in order to separate ceramic microsphere (CM) and cleaned ash (CA) from the residue. By utilizing soybean oil as a collector, the recovery rate of UC turned high at 85.8% due to the increased adsorption of UC, the high viscosity of soybean oil, and the increase in floating properties caused by the linoleic acid contained in soybean oil. All of the combustible components contained in the recovered UC were carbon components, with the carbon content registering high when soybean oil was used. The recovered UC had many pores with a rough surface; thus, it could be easily ground and then used as an industrial material for its fine particles. The CM and CA recovered by the clean separation process using hydro-cyclone had a spherical shape, and the particles were clearly separated without clumping together. The average diameter (D₅₀) of the particles was 5 ㎛, so it was possible to realize the atomization of CM through a process change.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.37-43
• /
• 2017

This review investigates the basic principle of physical interactions and failure mechanisms introduced in the materials and inner parts of semiconducting components under electromagnetic pulses (EMPs). The transfer process of EMPs at the semiconducting component level can be explained based on three layer structures (air, dielectric, and conductor layers). The theoretically absorbed energy can be predicted by the complex reflection coefficient. The main failure mechanisms of semiconductor components are also described based on the Joule heating energy generated by the coupling between materials and the applied EMPs. Breakdown of the P-N junction, burnout of the circuit pattern in the semiconductor chip, and damage to connecting wires between the lead frame and semiconducting chips can result from dielectric heating and eddy current loss due to electric and magnetic fields. To summarize, the EMPs transferred to the semiconductor components interact with the chip material in a semiconductor, and dipolar polarization and ionic conduction happen at the same time. Destruction of the P-N junction can result from excessive reverse voltage. Further EMP research at the semiconducting component level is needed to improve the reliability and susceptibility of electric and electronic systems.

• Analytical Science and Technology
• /
• v.17 no.3
• /
• pp.230-239
• /
• 2004

Using our PM2.5 and PM10 concentration data obtained from Seoul and Busan during winter 2002, we conducted comparative analysis on the role of inorganic ions in constituting airborne particles in two distinctive urban areas. Whereas the mass concentration of fine particle was more significant in Seoul, no such pattern was found in Busan. In addition, when the major components were compared between different particle fractions and between different sites, clear pattern was apparent between those. Although the major components of fine particles were generally compatible each other ($NH{_4}^+$, $NO{_3}^-$, and NSSS), those of coarse fractions were clearly distinguished. Although anthropogenic signatures were still important in Seoul, the influence of oceanic sources was clear in coarse fraction of Busan ($Cl^-$ and $Na^+$). Detailed statistical analysis of our data consistently supports the importance of different source processes between particle modes and source processes.

• Journal of Korean Society of Water and Wastewater
• /
• v.37 no.6
• /
• pp.425-435
• /
• 2023

Organoleptic parameters such as color, odor, and flavor influence consumer perception of drinking water quality. This study aims to evaluate the taste of the selected bottled and tap water samples using an electronic tongue (E-tongue) instead of a sensory test. Bottled and tap water's mineral components are related to the overall preference for water taste. Contrary to the sensory test, the potentiometric E-tongue method presented in this study distinguishes taste by measuring the mineral components in water, and the data obtained can be statistically analyzed. Eleven bottled water products from various brands and one tap water from I city in Korea were evaluated. The E-tongue data were statistically analyzed using multivariate statistical tools such as hierarchical clustering analysis (HCA), principal component analysis (PCA), and partial least squares discriminant analysis (PLS-DA). The results show that the E-tongue method can clearly distinguish taste discrimination in drinking water differing in water quality based on the ion-related water quality parameters. The water quality parameters that affect taste discrimination were found to be total dissolved solids (TDS), sodium (Na+), calcium (Ca²⁺), magnesium (Mg²⁺), sulfate (SO₄^2-), chloride (Cl^-), potassium (K⁺) and pH. The distance calculation of HCA was used to quantify the differences between 12 different types of drinking water. The proposed E-tongue method is a practical tool to quantitatively evaluate the differences between samples in water quality items related to the ionic components. It can be helpful in quality control of drinking water.

• Development and Reproduction
• /
• v.4 no.2
• /
• pp.243-250
• /
• 2000

To find the mechanism underlying the ADP-induced increase in the outward current in ovulated mouse oocytes, we examined changes in voltage-dependent currents using the whole cell voltage clamp technique and the internal perfusion technique. Eggs were collected from the oviduct of superovulated mice with PMSG and hCG. Membrane potential was held at -60 mV (or -80 mV in the case of recording $Ca^{2＋}$ currents) and step depolarizations or hyperpolarizations were applied for 300 ms. By step depolarizations, outward currents comprising steady-state and time-dependent components were elicited. They were generated in response to the positive potential more than 20 mV with severe outward rectification and were blocked by external TEA, a specific $K^{＋}$ channel blocker, suggesting that they be carried via $K^{＋}$ channels. Internally-perused 5 mM ADP gradually increased outward $K^{＋}$ currents (IK) 1 min after perfusion of ADP and reached slowly to maximum (150~170％) 5 min later over the positive potential range, implying that ADP might not be acted directly to the $K^{＋}$ channels. IK were decreased by 5 mM ATP without affecting the steady-state component of outward current. In contrast to the effect of ADP and ATP on IK, both effect of ATP and ADP on inward $Ca^{2＋}$ currents (ICa) could not be detected due to the continuous decrease in current amplitudes with time-lapse ("run-down" phenomena). To check if there is a G protein-involved regulation in the ionic current of mouse oocytes, 1 mM GTP was applied to the cytoplasmic side, and the outward current and inward currents were recorded. ICa was promptly increased in the presence of GTP whereas IK was not changed. from these results, it is concluded that the ATP-dependent regulation is likely linked in the ADP-induced increase in the outward $K^{＋}$ current, and G protein-involved cellular signalling might affect ion channels carrying $Ca^{2＋}$ and $K^{＋}$ in mouse oocytes.

• Journal of Bio-Environment Control
• /
• v.7 no.3
• /
• pp.246-252
• /
• 1998

This study was carried out to investigate the quality of ground water for hydroponics in Kyeongnam area in 1995. Water samples were collected and analyzed from 77 wells in green houses throughout Kyeongnam area. The values of several components in well water were as follows ; 7.4 in pH, 0.46dS/m in EC, 0.3mg/L in N $H_{4}$-N, 25.4mg/L in $Ca^{2＋}$, 42.6mg/L in C $l^{[-10]}$ and 72.5mg/L in S $O_{4}$$^{2-}$. The pH value showed high positive significance of correlationships with $Ca^{2＋}$ and EC. Also, the EC value showed high positive significance with N $a^{＋}$, $Ca^{2＋}$, S $O_{4}$$^{2-}$, $Mg^{2＋}$ and C $l^{[-10]}$ .

• Composites Research
• /
• v.18 no.5
• /
• pp.34-39
• /
• 2005

The relationship between strain and applied potential was derived for composite actuators consisting of single-wall carbon nanotubes (SWNTs) and conductive polymers (CPs). During deriving the relationship, an electrochemical ionic approach is utilized to formulate the electromechanical actuation of the composite film actuator. This relationship can give us a direct understanding of the actuation of a nanoactuator. The results show that the well-aligned SWNTs composite actuator can give good actuation responses and high actuating forces available. The actuation is found to be affected by both SWNTs and CPs components and the actuation of SWNTs component has two kinds of influences on that of the CPs component: reinforcement at the positive voltage and abatement at the negative voltage. Optimizations of SWNTs-CPs composite actuator may be achieved by using well-aligned nanotubes as well as choosing suitable electrolyte and input voltage range.

• Journal of Environmental Impact Assessment
• /
• v.19 no.3
• /
• pp.323-333
• /
• 2010

$PM_{10}$ mass were measured in Gwaebeopdong (inland) and Dongsamdong (seashore) of Busan in summer and fall, 2007 and the 24-hour averaged samples were analyzed to investigate temporal and spatial variability of metallic elements and water-soluble ions in $PM_{10}$. Overall average concentrations of $PM_{10}$ mass during the study period were 72.7 ${\mu}g/M^3$ and 64.3 ${\mu}g/M^3$ in Gwaebeopdong and Dongsamdong, respectively. As for metal elements, averaged concentrations of crustal components, Ca, Fe, K, Mn, and Ti, in Gwaebeopdong exhibited enhancement relative to Dongsamdong. Non-crustal elements, Pb and Cu, displayed elevated levels in Gwaebeopdong while Ni and Zn were observed to be high in Dongsamdong. Averaged nitrate concentration in Gwaebeopdong (6.36 ${\mu}g/M^3$) was greater than in Dongsamdong(5.68 ${\mu}g/M^3$) and both areas had higher level of nitrate in summer than in fall. Averaged sulfate concentrations in Dongsamdong (25.4%) exhibited elevated level relative to Gwaebeopdong (19.4%). Overall average contribution of water-soluble ions to $PM_{10}$ in Dongsamdong (47.5%) was higher than in Gwaebeopdong (37.8%). The average mass fractions of secondary ions in $PM_{10}$ were elevated in Dongsamdong (37.1%) as compared to Gwaebeopdong (31.4%). Equivalent ratio of [${SO_4}^{2-}/NO_3{^-}$] was seen to be lower in Gwaebeopdong (1.39) than that in Dongsamdong (1.79) and consistently higher in summer than in fall for both areas.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.1
• /
• pp.31-38
• /
• 2015

Due to the heightened ambient $PM_{2.5}$ levels, the whole citizen of Japan, especially dwellers in Fukuoka Prefecture, start to make attention to the particulate matter (PM) of indoor environments. This study was aimed to thoroughly estimate the characteristics of indoor PM collected in five Japanese homes located in Fukuoka Prefecture. Simultaneous indoor measurements of PM were intensively made at five homes using filter-pack samplers, particle counters, and $PM_{2.5}$ monitors for a day in springtime, 2012. Major ionic and carbonaceous components were also analyzed. The time series fluctuation of PM number concentration was gradually decreased by 6 AM and then it was rapidly increased by 8 AM in all indoor sites. The maximum level of $PM_{2.5}$ was measured at the morning time (8 AM-9 AM) when the resident's behavior was fast and strenuous. The Indoor/Out-door (I/O) ratio for the giant PM larger than $5.0{\mu}m$ was 1.16. It was possible to identify PM types and estimate the resident's behavior through the comparison the theoretically calculated and the measured retention times for several types of PM in an indoor site. The theoretically reconstructed mass concentration of $PM_{2.0-0.3}$ suggested that the portion of $PM_{2.5}$ in indoor was quietly occupied by $PM_{0.3}$ or the PM inherently originated from indoor environment.