• Title/Summary/Keyword: invisible

Search Result 694, Processing Time 0.026 seconds

Fault Detection of Ceramic Imaging using ART2 Algorithm (ART2 알고리즘을 이용한 세라믹 영상에서의 결함 검출)

  • Kim, Kwang Baek
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.11
    • /
    • pp.2486-2491
    • /
    • 2013
  • There are invisible defects by naked eyes in ceramic material images such as internal stomata, cracks and foreign substances. In this paper we propose a method to detect and extract such defects from ceramic pipe weld zone by applying ART2 learning. In pre-processing, we apply Ends-in Search Stretching to enhance the intensity and then perform fuzzy binarization with triangle type membership function followed by enhanced ART2 that interacts with random input patterns to extract such invisible defects. The experiment verifies that this proposed method is sufficiently effective.

Correction of the Epicanthal Fold with Invisible Scar (눈에 띄는 흉의 생성 없는 내안각췌피 교정술)

  • Lee, Yoon Ho;Lee, Si Woo;Baek, Rong Min
    • Archives of Plastic Surgery
    • /
    • v.32 no.3
    • /
    • pp.299-303
    • /
    • 2005
  • The epicanthal fold is common natural finding in Asian eyes. It is very common that patients, who look for oriental blephaloplasty for double eye lid, request correction epicanthal fold. It is very often difficult to achieve satisfactory results if the correction of the epicanthal fold is not corrected concomitantly. Many authors described surgical procedures for correction of epicanthal folds. But most of them leave additional scars which tend to be hypertrophic and noriceable. We achieved satisfactory result in epicanthoplasty with invisible scar, using combination of procedures, such as upward incision, double eyelid operation, anchoring suture of the medial upper lid skin to the medial canthal tendon, trans-nasal root subcutaneous mattress suture of the epicanthal fold itself and combined rhinoplasty. For past six years (1998 to 2003) 17 patients have been operated with one of these mentioned procedures. The mean follow up was 4months (2weeks to 6months). All patients were satisfied and no major complication was noted. This method can be one of the effective procedures for correcting the Asian epicanthal fold for avoiding potential visible scar and ancillary procedure in double eye lid blephaloplasty.

The Effects of Muscle Fatigue by Transcutaneous Electrical Nerve Stimulation (경피신경전기자극이 근피로에 미치는 영향)

  • Park Rae-Joon
    • The Journal of Korean Physical Therapy
    • /
    • v.11 no.1
    • /
    • pp.71-77
    • /
    • 1999
  • The purpose of this study was to investigate the changes of muscle power by transcutaneous electrical nerve stimulation(TBNS), low frequency-low intensity(20pps, invisible muscle contraction intensity), low frequency-high intensity(20pps, visible muscle contraction), high frequency-low intensity(100pps, invisible muscle contraction intensity) and high frequency-high intensity(100pps, visible muscle contraction). The results were as follows. 1. Increased muscle power after 30 minutes of treatment by low frequency-low intensity TENS, and post-treatment 30 minutes muscle power were increased more than pre-treatment power(p<0.05). 2. Decreased muscle power after a 30 minute treatment by low frequency-high intensity TENS, and after the 30 minute treatment was terminated muscle power didn't recover to pre-treatment levels. 3. Decreased muscle power after 30 minute treatment by high frequency-low intensity TENS, but post-treatment 30 minute, muscle power didn't recover to pre-treatment levels. 4. The muscle power was remarkably decreased by high frequency-high intensity TENS after 30 minute treatment, in addition treatment terminated after 30minutes didn,t recover to pre-treatment power(p<0.05). 5. Lower frequency-low intensity TENS are good methods for preventing muscle fatigue, buty high intensity (TENS) are increased muscle fatigue. 6. Traditional TENS by high frequency-low intensity is a good method for preventing muscle fatigue.

  • PDF

A Study on the Safety Evaluation of Bridge Footings using GPR (GPR 시험을 이용한 교량기초의 안전성 조사방법에 관한 연구)

  • Kim, Yong-Gon;Paik, Shin-Won
    • Journal of the Korean Society of Safety
    • /
    • v.21 no.1 s.73
    • /
    • pp.105-113
    • /
    • 2006
  • The footing of a bridge is a very essential part that support the whole load induced by the bridge itself and the traffic as well. However, once a bridge is built, the footing is buried under soil so the footing is invisible from outside. Therefore, the safety or condition of the footing is very difficult to estimate. Not only the length of the imbedded part of the footings but also the type of footings are unknown once the design record is gone. Some nondestructive techniques can be used to evaluate invisible part of the footings but the results have not been successful yet. Using GPR (Ground Penetrating Radar), which has been used for the nondestructive evaluation in military purposes, the condition assessment of the footings have been successfully conducted in this research. The field evaluation and laboratory tests have been conducted to find effective factors in the condition assessment of the footings. The equipment and basic theory of the GPR has been presented. The field test results show that the GPR can be successfully used for the safety evaluation of the footings. More test results and field data are needed for more precise evaluation of the footings.

Obstacle Information Transfer and Control Method using Haptic Device consist of Vibration Motors (진동모터로 구성된 햅틱 디바이스를 이용한 장애물 정보 전달 및 제어 방법)

  • Lee, Dong-Hyuk;Noh, Kyung-Wook;Kang, Sun Kyun;Han, Jong Ho;Lee, Jang-Myung
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.20 no.10
    • /
    • pp.1036-1043
    • /
    • 2014
  • In this paper, a new haptic device is proposed for the teleoperation, which can recognize the invisible environment of a mobile robot. With this new device, it is possible for the user to identify the location of an obstacle and to avoid it. The haptic device has been attached on the top of a joystick so that the user can remotely control the mobile robot to avoid the obstacles which are recognized by the ultrasonic sensors. Also, the invisible environment is recognized more accurately overlapping the data from the ultrasonic sensors. There are five vibration motors in the haptic device to indicate the direction of the obstacle. So the direction of the obstacle can be recognized by the vibration at the finger on each vibration motor. For various situations and surrounding environments, experiments are performed using fuzzy controller and overlapping ultrasonic sensors. The results demonstrate the effectiveness of the proposed haptic joystick.

Preparation and Luminescene properties with invisible inoranic phosphors of nano size (나노크기의 비가시 무기형광체 제조와 발광특성)

  • Jeong, Jae-Hoon;Yun, Hyun;Jang, Gyu-Hwan;Shin, Sang-Sik
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2008.06a
    • /
    • pp.461-462
    • /
    • 2008
  • $BaMgAl_{10}O_{17}$:Mn, $Eu^{2+}$ green phosphors has been synthesized by the solid state reaction. Green phosphors of nano-size were manufactured in short time by shake method. which were easily manufactured respectively general method. Green phosphors of nano size were control additive, size of $ZrO_3$ ball, shake time and weight of ball in toluene. In result that green phosphors were obtained particle size of 140nm~150nm. The characteristics of fired samples were obtained by 365nm and 380nm excitation source under ultraviolet. In result that the highest PL intensity were observed in wavelength of 365nm.

  • PDF

Development of a Interactive Stereoscopic Image Display System using Invisible Interaction Surface Generation (비가시성 인터랙션 표면 생성을 통한 인터랙티브 입체영상 시연 시스템 개발)

  • Lee, Dong-Hoon;Yang, Hwang-Kyu
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.6 no.3
    • /
    • pp.371-379
    • /
    • 2011
  • In this paper, we propose a development methodology of interactive stereoscopic image display system. In our case, we consider a multiple touch recognition technique as the interaction method. That's because we want to guarantee multiple user access and interaction to the content without any restriction. In this case, however, some restrictions are occurred on account of the distance between display and participants. For this reason, this paper propose an invisible interaction surfaces which are generated in the air. This surface is utilized as interaction medium instead of the display wall. We also present an effective way to generate and edit interactive stereoscopic images based on Game Engine.

Analysis of hysteresis rule of energy-saving block and invisible multi-ribbed frame composite wall

  • Lin, Qiang;Li, Sheng-cai;Zhu, Yongfu
    • Structural Engineering and Mechanics
    • /
    • v.77 no.2
    • /
    • pp.261-272
    • /
    • 2021
  • The energy-saving block and invisible multi-ribbed frame composite wall (EBIMFCW) is a new type of load-bearing wall. The study of this paper focus on it is hysteresis rule under horizontal cyclic loading. Firstly, based on the experimental data of the twelve specimens under horizontal cyclic loading, the influence of two important parameters of axial compression ratio and shear-span ratio on the restoring force model was analyzed. Secondly, a tetra-linear restoring force model considering four feature points and the degradation law of unloading stiffness was established by combining theoretical analysis and regression analysis of experimental data, and the theoretical formula of the peak load of the EBIMFCW was derived. Finally, the hysteretic path of the restoring force model was determined by analyzing the hysteresis characteristics of the typical hysteresis loop. The results show that the curves calculated by the tetra-linear restoring force model in this paper agree well with the experimental curves, especially the calculated values of the peak load of the wall are very close to the experimental values, which can provide a reference for the elastic-plastic analysis of the EBIMFCW.

The Effective Recovery of Gold from the Invisible Gold Concentrate Using Microwave-nitric Acid Leaching Method (마이크로웨이브-질산침출방법에 의한 비가시성 금의 회수율 향상)

  • Lee, Jong-Ju;Myung, Eun-Ji;Park, Cheon-Young
    • Journal of the Mineralogical Society of Korea
    • /
    • v.32 no.3
    • /
    • pp.185-200
    • /
    • 2019
  • This study aimed to liberate gold from invisible gold concentrate (Au = 1,840.00 g/t) through microwave nitric acid leaching experiments. For the purpose, this study conducted microwave-nitric acid leaching experiments and examined nitric acid concentration effect, microwave leaching time effect and sample addition effect. The results of the experiments were as follows: Au (gold) contents were not detected in all of the microwave leaching conditions. In the insoluble-residue, weight loss rate tended to decrease as the nitric acid concentration, microwave leaching time and sample addition increased. In an XRD analysis with solid-residue, it was suggested that gypsum and anglesite were formed due to dissolution of calcite and galena by nitric acid solution. When a fire assay was carried out with insoluble-residue, it was discovered that gold contents of the solid-residue were 1.3 (Au = 2,464.70 g/t) and 28.8 (52,952.80 g/t) times more than those of concentrate. But in the gold contents recovered, a severe gold nugget effect appeared. It is expected that the gold nugget effect will decrease if a sampling method of concentrate is improved in the microwave-nitric acid leaching experiments and filtering paper with smaller pore size is used for leaching solution and burned filter paper is used for sampling in lead-fire assay.

Phonetic Evidence for Silent Beats in English

  • Kim, Hyo-Young
    • Korean Journal of English Language and Linguistics
    • /
    • v.3 no.1
    • /
    • pp.1-14
    • /
    • 2003
  • This paper proposes an empty constituent, a silent beat, to express long duration of stressed syllable in the word final position and rhythmic correspondence in English. This empty constituent has an important consequence. It helps reveal one of the characteristics English feet have: they must be non-final in nouns as well as in verbs. In addition, the silent beats overcome the shortcomings of empty constituents proposed previously, namely null vowels (Burzio 1994) and invisible suffixes (Hammond 1999).

  • PDF