• 대한기계학회논문집B
• /
• 제30권3호
• /
• pp.270-277
• /
• 2006

Inverse radiation problems were solved for estimating boundary temperature distribution in a way of function estimation approach in an axisymmetric absorbing, emitting and scattering medium, given the measured radiative data. In order to reduce the computational time fur the calculation of sensitivity matrix, automatic differentiation and Broyden combined method were adopted, and their computational precision and efficiency were compared with the result obtained by finite difference approximation.. In inverse analysis, the effects of the precision of sensitivity matrix, the number of measurement points and measurement error on the estimation accuracy had been inspected using quasi-Newton method as an inverse method. Inverse solutions were validated with the result acquired by additional inverse methods of conjugate-gradient method or Levenberg-Marquardt method.

• Advances in aircraft and spacecraft science
• /
• 제5권6호
• /
• pp.671-689
• /
• 2018

Bending, buckling and free vibration responses of functionally graded (FG) higher-order beams resting on two parameter (Winkler-Pasternak) elastic foundation are studied using a new inverse hyperbolic beam theory. The material properties of the beam are graded along the thickness direction according to the power-law distribution. In the present theory, the axial displacement accounts for an inverse hyperbolic distribution, and the transverse shear stress satisfies the traction-free boundary conditions on the top and bottom surfaces of the beams. Hamilton's principle is employed to derive the governing equations of motion. Navier type analytical solutions are obtained for the bending, bucking and vibration problems. Numerical results are obtained to investigate the effects of power-law index, length-to-thickness ratio and foundation parameter on the displacements, stresses, critical buckling loads and frequencies. Numerical results by using parabolic beam theory of Reddy and first-order beam theory of Timoshenko are specially generated for comparison of present results and found in excellent agreement with each other.

• 대한전자공학회논문지
• /
• 제27권5호
• /
• pp.747-755
• /
• 1990

In this paper, we presented a method of constructing a multiplier and an inverse element generator over finite field GF(3**m). We proposed the multiplication method using a descending order arithmetics of mod F(X) to perform the multiplication and mod F(X) arithmetics at the same time. The proposed multiplier is composed of following parts. 1) multiplication part, 2) data assortment generation part and 5) multiplication processing part. Also the inverse element generator is constructed with following parts. 1) multiplier, 2) group of output registers Rs, 3) multiplication and cube selection gate Gl, 4) Ri term sequential selection part. 5) cube processing part and 6) descending order mod F(X) generation part. Especially, the proposed multiplier and inverse element generator give regularity, expansibility and modularity of circuit design.

• 전자공학회논문지C
• /
• 제34C권5호
• /
• pp.33-42
• /
• 1997

In this paper, the modified inverse chebyshev low-pass function is analyzed in the frequency domain, time domain, and sensitivity characteristics as compared with the classical inverse chebyshev function. Unlike the classical function, the modified function exhibits progressively diminishing ripples in the stopband. So, the modified function has a great attenuation throughout the stopband except at the vicinity of a stop frequency and can be realizable in the passive doubly-terminated ladder network for the even order. The poles of the modified function move towards real axis by the effect of diminishing ripples. Thus the pole-Q, which is one of the valuable measurements to estimage the function characteristics, is reduced without increasing order. In the frequency and can be realizable in the passive doubly-terminated ladder network to examine the magnitude and pole-Q sensitivities.

• Journal of Mechanical Science and Technology
• /
• 제19권8호
• /
• pp.1611-1620
• /
• 2005

This paper shows the use of wavelet transformation combined with inverse acoustics to reconstruct the surface velocity of a noise source. This approach uses the boundary element analysis based on the measured sound pressure at a set of field points, the Helmholtz integral equations and wavelet transformation for reconstructing the normal surface velocity field. The reconstructed field can be diverged due to the small measurement errors in the case of nearfield acoustic holography (NAH) using an inverse boundary element method. In order to avoid this instability in the inverse problem, the reconstruction process should include some form of regularization for enhancing the resolution of source images. The usual method of regularization has been the truncation of wave vectors associated with small singular values, although the order of an optimal truncation is difficult to determine. In this paper, a wavelet transformation is applied to reduce the computation time for inverse acoustics and to enhance the reconstructed vibration field. The computational speed-up is achieved, with solution time being reduced to $14.5\%$.

• 한국정보통신학회논문지
• /
• 제16권10호
• /
• pp.2253-2260
• /
• 2012

본 논문에서는 H.264/AVC 복호기의 역변환과 역양자화를 위한 효율적인 하드웨어 구조를 제안한다. 기존 역변환 및 역양자화기에서는 AC계수와 DC계수를 복호하는 순서가 다르다. 색차 DC계수와 인트라 $16{\times}16$ 모드에서 휘도 DC계수는 역변환을 수행하고 역양자화를 수행하는 반면에, 휘도 및 색차 AC계수는 역양자화를 수행하고 역변환을 수행하기 때문에 하드웨어로 구현시 제어 복잡도가 증가한다. 제안하는 구조는 DC계수와 AC계수에 관계없이 역양자화를 수행한 후 역변환을 수행하여 제어 복잡도를 감소시키고, 역양자화 연산을 공통 연산기를 사용하여 처리함으로써 계산 복잡도가 감소한다. 기존 역양자화기에는 나눗셈 연산을 포함하고 있어 복호하는 순서를 변경할 경우 오차가 발생하기 때문에 나눗셈 연산을 역변환 후에 수행하여 오차를 방지한다. 또한, 역변환기와 역양자화기를 3단 파이프라인으로 구성하고 수평 IDCT와 수직 IDCT를 병렬로 구현하여 수행 사이클을 감소시켰다. 제안하는 역변환기와 역양자화기의 매크로블록 당 처리되는 사이클 수를 비교 분석한 결과, 기존 구조 대비 45%이상 향상된 결과를 얻었다.

• Journal of applied mathematics & informatics
• /
• 제25권1_2호
• /
• pp.415-424
• /
• 2007

The generalized inverses have many important applications in the aspects of theoretic research and numerical computations and therefore they were studied by many authors. In this paper we get some necessary and sufficient conditions of the forward order law for {1}-inverse of multiple matrices products $A\;=\;A_1A_2{\cdots}A_n$ by using the maximal rank of generalized Schur complement.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.16-19
• /
• 1996

The objective of this paper is to present a new adaptive nonlinear compensation method, which is based upon the Pth-order inverse theory and can be implemented in a systematic way, for weakly nonlinear systems that can be modeled by a Volterra series. In particular, employment of the proposed approach for the linearization of a given nonlinear system leads to the effective elimination of (up to a required order) nonlinearities in the overall system output. To demonstrate the feasibility of the proposed method, simulation results using a satellite communication system model are also provided.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.514-518
• /
• 2004

This paper presents an algorithm generating inverse element over finite fields $GF(3^{m})$, and constructing method of inverse element generator based on inverse element generating algorithm. A method computing inverse of an element over $GF(3^{m})$ which corresponds to a polynomial over $GF(3^{m})$ with order less than equal to m-l. Here, the computation is based on multiplication, square and cube method derived from the mathematics properties over finite fields.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.179-182
• /
• 1997

One-step inverse methods based on deformation theory causes some amount of error. The amount of error is generally increased as the deformation path is more complex. As a remedy, a new three dimensional multi-step inverse method is introduced for optimum design of blank shapes and strain distributions from desired final shapes. The approach extends a one-step inverse method to a multi-step inverse method in order to reduce the amount of error. The algorithm developed is applied to square cup drawing to confirm its validity by demonstrating reasonably accurate numerical results.