• Journal of the Korea Management Engineers Society
• /
• v.23 no.4
• /
• pp.87-103
• /
• 2018

This paper introduces the method to develop two main types of the fuzzy OEE (Overall Equipment Effectiveness) models via triangular membership function for measuring uncertainty. The fuzzy OEE includes model type 1 and model type 2. The model type 1 is used when the theoretical machine speed only reflects the time loss whereas model type 2 is used when the actual machine speed reflects both time and speed loss. Model type 2 has shown to perform a lower availability rate and a higher performance rate compared to model type 1. In addition, the fuzzy UPH (Unit Per Hour) which is derived from using the fuzzy OEE is presented to satisfy demand uncertainty. The fuzzy UPH can easily measure the fuzzy tact time and cycle time by reciprocating itself. Finally, this study demonstrates the fuzzy OEE models using IVIFS (Interval-Valued Intuitionistic Fuzzy Set) based on the characterization via membership function, non-membership function and hesitant function. For the purpose of analyzing the fuzzy system OEE, the OEE for each machine of plant structure is considered triangular interval-valued intuitionistic fuzzy number. Regardless of plant structure, the validity degree of fuzzy membership function of system OEE decreases when the number of machine with worst value of the validity degree increases. Corresponding examples are presented in this paper for practitioner to understand the applicability and practicability of the proposed fuzzy OEE methods.

• Korean Journal of Poultry Science
• /
• v.20 no.3
• /
• pp.133-140
• /
• 1993

A study was conducted to investigate the concentrations of Ca, P and ash in metatarsal bone of broiler chicks exposed to UV light in different Interval. Day-old Hubbard broiler chicks (199＝10 control＋3 irradiation interval $\times$ 9 elapsed time $\times$ 7 replicate) were fed vitamin D3 deficient diet for 3 wk in a windowless subdued-light room and exposed to 297 nm UVB light by 0.068 mJ/$\textrm{cm}^2$ three times In 0, 12 or 24 h interval. The metatarsal bones were taken at 0, 6, 12, 18, 24, 48, 96, 144 or 240 h after last irradiation, separated from adhering tissue, ether extracted, dried and ashed. The Ca concentration was measured by atomic absorption spectrophotometry and P by ammonium metavanadate colorimetry. When the birds were continuously exposed to UVB light for 30 min without interval, the Ca content in metatarsus increased gradually according to the time after irradiation and reached the highest value 16.75% at 240 h after exposure. The P content also increased gradually until 144 h, where it was 9.75%. The ash content in metatarsus increased continuously until 240 h, the final time in this research, where 42.75% was shown. As 10 min three times irradiation in 12 h interval was applied to the chicks, the metatarsal Ca presented a small peak(13.31%) at 12 h after irradiation and a large peak(16.91%) at 144 h. P content showed a small peak(7.18%) at 12 h and a large level(8.34%) at 240 h. Ash content increased continuously until 240 h, where it was 46.53%. The small peaks in Ca and P concentration were thought to be derived from preirradiation at 12 and 24 h before final irradiation for 10 min. When 24 h interval system was treated, the peak value of Ca content(24.18%) occurred earlier(96 h) than those in 0 and 12 h interval systems. P content also showed the maximum value at 96 h(7.29%). Ash content presented an increasing trend until 240 h, where 45.75% was appeared. In respecting the method of UVB irradiation, the peak value of Ca content in metatarsus appeared earlier in 24 h interval system than in other systems. Meanwhile the ash contents in metatarsus of birds exposed to UVB light in 12 and 24 h interval procedures were higher than those in 0 h interval one. Therefore, it was concluded that a daily 10 min irradiation of UVB light would be desirable for increasing the Ca and ash content in metatarsus of brolier chicks.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.1
• /
• pp.7-11
• /
• 2015

In this paper, an automatic focusing method has been proposed for speedy and reliable measurement and inspection in industry. It is very difficult to determine focusing step size and moving direction in one camera autofocusing. The proposed method can improve speed and accuracy of focusing by using the optical axis interval of two cameras, which is automatically set up as focusing step size. Also, it can determine moving direction from focus value comparisons of two cameras, and then solve ambiguity of one camera focusing. Its performance is verified by experiments. It is expected that it can apply to optical system for measurement and inspection in industry fields.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.6
• /
• pp.1122-1129
• /
• 2007

For a system with multiple real-time tasks of different deadlines, it is very difficult to find the optimal checkpoint interval because of the complexity in considering the scheduling of tasks. In this paper, we determine the optimal checkpoint interval for multiple real-time tasks that are scheduled by RM(Rate Monotonic) algorithm. Faults are assumed to occur with Poisson distribution. Checkpoints are inserted in the execution of task with equal distance in the same task, but different distances in other tasks. When faults occur, rollback to the latest checkpoint and re-execute task after the checkpoint. We derive the equation of maximum slack time for each task, and determine the number of re-executable checkpoint intervals for fault recovery. The equation to check the schedulibility of tasks is also derived. Based on these equations, we find the probability of all tasks executed within their deadlines successfully. Checkpoint intervals which make the probability maximum is the optimal.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.2
• /
• pp.46-52
• /
• 2005

In this paper, we present a temporal association rule based on item time intervals. A temporal association rule is an association rule that holds specific time intervals. If we consider itemset in the frequently purchased period, we can discover more significant itemset satisfying minimum support. Because the previous study did not consider the time interval between purchased item, it could find itemset that did not satisfy the minimum support in case some item was frequently purchased in a specific period and rarely or not purchased in other period. Our approach uses interval support which is counted by period with support and confidence in the association rule to discovery large itemset.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.251-252
• /
• 2008

Type-2 퍼지 집합은 Type-1 퍼지 집합에서는 다루기 어려운 언어적인 불확실성을 더욱 효과적으로 다룰 수 있다. TSK 퍼지 로직 시스템(TSK Fuzzy Logic Systems; TSK FLS)은 후반부를 1차 및 2차 함수식으로 나타내며 Mamdani 모델과 함께 가장 널리 사용되는 모델이다. 본 연구의 Interval Type-2 TSK FLS은 전반부에서 Type-2 퍼지 집합을 이용하고 후반부는 계수가 Type-1 퍼지집합인 1차식을 사용한다. 또한 전반부는 가우시안 형태의 Type-2 멤버쉽 함수를 사용하며, 오류역전파 학습알고리즘을 사용하여 파라미터들을 최적화 한다. 또한 학습에 앞서 PSO(Particle Swarm Optimization) 알고리즘을 사용하여 최적 학습률을 찾아 모델의 학습능력을 보다 효율적으로 한다. 본 논문에서는 Type-1과 Type-2 FLS의 성능을 가스로 공정 데이터를 적용하여 두 모델의 성능을 비교하고 노이즈를 추가한 데이터를 이용하여 노이즈에 대한 성능도 비교 분석한다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.11
• /
• pp.2066-2073
• /
• 2008

In this paper, the problem of global asymptotic stability of uncertain stochastic neural networks with delay is considered. The delay is assumed to be time-varying and belong to a given interval. Based on the Lyapunov stability theory, new delay-dependent stability criteria for the system is derived in terms of LMI(linear matrix inequality). Three numerical examples are given to show the effectiveness of proposed method.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1542-1550
• /
• 2013

This paper presents new results on delay-dependent global exponential stability for uncertain linear systems with interval time-varying delay. Based on Lyapunov-Krasovskii functional approach, some novel delay-dependent stability criteria are derived in terms of linear matrix inequalities (LMIs) involving the minimum and maximum delay bounds. By using delay-partitioning method and the lower bound lemma, less conservative results are obtained with fewer decision variables than the existing ones. Numerical examples are given to illustrate the usefulness and effectiveness of the proposed method.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1276-1279
• /
• 1987

Cardiac arrhythmias are associated with electrical Instability and, hence, with abnormal mechanical activity of the heart in many cases, arrhythmias can be treated with drugs or electric shock to control and/or stop them. Hence fast arrhythmia detection is very important. In this paper RR interval, QRS width, and morphology are used for diagnosis and QRS complex is detected by hardware system. hence diagnosing time is shorten. Moreover doctors or nurses who have little knowledge of computer manipulation can get the Information of Patient's ECG by showing characteristics of abnormal waveform and by mapping graphs of RR interval .vs. QRS width and RR interval .vs. morphology on screen.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2688-2690
• /
• 1999

This paper presents the modeling method of $3{\Phi}$ phase-controlled rectifier considering the overlap interval for the drive of DC motor in the Matlab environment. The model is constructed by the module-based method and therefore it is appropriate in the research of the closed-loop controlled power electronic system in the Matlab/Simulink environment. The model of SCR is used as the element for the power transformation. The simulation results show that the overlap interval from the effect of the input inductance is accurate.