• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.115-122
• /
• 2007

The purpose of this study is to extract design concepts, especially in relation to light, as a part of extracting design concepts in architectural interior design. This study consists of two steps. Firstly, appropriate design concepts are extracted from various design characteristics. Secondly, these concepts are classified in the frame of other components of architectural space, as well as in the frame of the plastic characteristics of light. Various design characteristics were analyzed, those of which relating to the plastic character of space, namely, visual phenomenon. As a result of the analysis, 32 concepts were extracted. These concepts, in the frame of other components of architectural space (space, form, structure, opening of space, material, color, inside & outside relationship), were classified, as well as In the frame of the plastic character of Light (transparency, perception, direction, ornament). As the results of this research, the suggested design concepts will be a study material, available to the interior designers as well as students who want to utilize the organized study concepts.

• Korean Institute of Interior Design Journal
• /
• no.17
• /
• pp.45-51
• /
• 1998

A purpose of this study was to investigate actual condition of the modern adaptation of interior elements(wall, floor, ceiling. door & window) in traditional house. The examined objects were 185 pictures of restaurants and cafe interior spaces from the 5 different monthly magazines between jan. 1993. to Dec 1997. The results of this study were as follows : 1. Mostly they were either partial adaptation from the original or partially transformed adaptation rather than entire adaptation of the original. 2. Of the traditional interior elements adapted in restaurants and cafe space only specific elements were being adapted. For example partial adaptation from the original were oiled paper flooring(Jangpan) plaster wall ceiling finish that left the rafters and beams exposed(Yondung-chonjang) and window or door frame which is vertical lattices accented with horizontal lattices grouped into three sections(Ttisal-mum) And partially transformed adaptation were oiled paper flooring rice papered (Hangji) wall Yondung-chonjang window or door frame of Wan character(Wanja-mun). 3, In regard to space the mostly adapted spaces were halls rather than rooms.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.1
• /
• pp.5-13
• /
• 2012

The frame of pipe greenhouses in Korea have been collapsed increasingly due to very weak in structure caused by the heavy snow and strong wind. In order to reduce the collapse of green houses, it is urgent to develop the new structural system in stress tolerant greenhouses. Therefore, this paper performed the structural analysis of greenhouse frame in accordance with snow loads and wind loads. Three type models in structural frame configuration of greenhouses, that is, existing type, diagrid type, and honeycomb type are selected. It was classfied the section shape of structural frames in greenhouses into arch style, standard style, and diagonal standard style. As a result of this paper, it was verified that the structural system of diagrid type is better than that of existing type against snow loads and wind loads in the frame of greenhouses.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2003.05a
• /
• pp.117-122
• /
• 2003

This study deals with apartments, the representative form of residence in Korea, and analyzes the residential plane of 30-pyong apartments that are constructed by the 5 construction companies within in the past three years. It is discovered that these apartments show a certain form and that developing the frame work of interior elements according to the characteristics of family types of 30-pyong apartment residents and the process for such a frame work are needed. Therefore, by analyzing the differences of residential forms according to resident types, this investigation tries to approach the design centering around users. To summarize the steps and contents of this study, first, it draws the understanding and the study field of common residential space, second, it shows the characteristics of family types within residential space, third, it analyzes and verifies the differences of characteristics according to family types within the representative size and form of plane. This investigation is aimed to provide the reasons for developing different planes according to family types despite they may be of the same size, to show the frame of the study method for developing the plane design and the interior element design for users and to suggest the way of designing residence in a conditional approach applying the conditions of users within common residential space.

• Korean Journal of Geomatics
• /
• v.4 no.1
• /
• pp.23-30
• /
• 2004

This study aims to establish interior orientation for various types of sensors including frame cameras, panoramic cameras, line cameras, and whisk-broom scanners. To do so, this study suggests the classification of components of interior orientation of which elements are different according to the sensors. This is entailed by incorporation of sensor characteristics into mathematical models of interior orientation parameters are suggested for being used as guidelines in recovering systematic distortions. Finally, the potential errors resulted from the assumption of regarding sensor model of whisk-broom scanner model as that of push-broom scanner are discussed.

• Journal of Magnetics
• /
• v.16 no.4
• /
• pp.391-397
• /
• 2011

An inductance measurement method for interior permanent magnet synchronous machine (IPMSM) is proposed in this paper. In this method, the motor is measured at standstill condition, and only a 3-phase voltage source, an oscilloscope and a DC voltage source are required. Depending on the deductive dq-axis voltage equations in the stationary frame of reference, the dq-axis inductances at different current magnitude and vector angle can be calculated by the measured 3-phase voltages and currents. And hence, the saturation and cross-magnetizing effect of the inductances are measurable. This paper introduces the principle equations, experiment setup, data processing, and results comparison on the concentrated-winding and distributed-winding IPMSMs.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.4
• /
• pp.67-75
• /
• 2012

The damage of greenhouse has been increasing due to frequent collapse of frame in greenhouse caused by the heavy snow and strong wind. But, greenhouses are constructed by steel tube members of pipe style and pin connection of them, so these greenhouses are very weak. Therefore, this study was carried out to find the type of member section and structural frame system in stress tolerant greenhouses. The modeling types for analysis were designed in accordance with structural frame configuration and member section in greenhouse. These types of models, which are existing type, diagrid type, symmetric and asymmetric section type of frame member in greenhouse were classified. Displacement analysis varying the vertical and horizontal loads for a series of models was carried out. As a result of this paper, it was verified that the structural frame configuration of diagrid type and asymmetric type of member section is better than existing type in the frame of greenhouses against snow loads and wind loads.

• Korean Institute of Interior Design Journal
• /
• no.6
• /
• pp.53-62
• /
• 1995

This research aims at proving the fact that the forms, spaces and many other design concepts of Modernism are much related with the changes of materials, struc-tures, and the way of construction as well as the idealis-tic and aesthestic things through the history of steel, one of the most important materials of the style. The meaning steel has in the modern architecture can be studied in the structure and industrial production system. 1) Steel frame broadened the range of understanding the space and created the new form through the skeleton/skin structure by reinterpreting the existing space fac-tors while it was being adopted to the architecture. Walls could be freed from the traditional function of bear-ing wall and roofs gave the transparancy to the interior by being linked with the glass. Posts lost the function which confines the space in the frame of the grid system and gave the flexibility to the interior due to the economical materials. These changes made the movable partition, screen with various materials and the system furniture which divides the space more important. 2) In the aspect of the industrialized architecture, it be-came the moment that the most of the archtectural com-posing parts were in mass production as they were standarized, high qualified, and generalized by the indus-trial characteristics of steel, and the specialization of structure and cladding, but the neither of the efforts to make the building itself by mass production or to standarize it was fulfilled. The high-tech architecture which borrows its archtectural manifestation from the high technology, however, is consistently paying efforts on such industrialization.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.757-762
• /
• 2000

The purpose of this study is to investigate the performance of slab-beam-column subassemblage in the Ordinary Moment Frame(OMF). For this purpose, 3-story building was designed according to UBC and ACI building code(ACI 318-99) and the subassemblages of in the first story were constructed. The subassemblages were classified into interior and exterior. Each interior and exterior subassemblage is modeled by the 2/3 scale experimental specimens. All the specimens have the transverse beam and the columns on the slab have the lap splice as the typical exterior and interior slab-beam-column subassemblage. The interior subassemblage was tested under the constant axial force, while the exterior subassemblage was tested under the fluctuating axial force. Based on the results of the experiments, the performance of each subassemblage is evaluated and the failure mode is investigated.

• Journal of Families and Better Life
• /
• v.16 no.4
• /
• pp.167-182
• /
• 1998

The purpose of this study was to investigate actual condition of the modern adaptation of interior elements (wall floor ceiling door & window) in traditional house. The examined objects were 316 pictures of residential interior spaces from the 5 different monthly magazines between Jan. 1993 to Dec. 1997 The results of this study were as follows; 1. Mostly they were either parital adaptation from the original or partially transformed adaptation rather than entire adaptation of the original 2. Of the traditional interior elements adapted in residential space only specific elements were being adapted. For example. partial adaptation from the original were oiled paper flooring(Jangpan) rice papered wall (Hanji) a ceiling finish that left the rafters and beams exposed (Yondunt-chonjang) and window or door frame which is vertical lattices accented with horizontal lattices grouped into three sections(Ttisal-mun)And partially transformed adaptation were wood flooring(Chang-maru) rice apered wall(Hanji) Yondung-chonjang wind or door frame of Wan character(Wanja-mum) 3. In regard to space the mostly adapted spaces were bedrooms rather than living or dining rooms.