• 한국태양에너지학회 논문집
• /
• 제27권3호
• /
• pp.1-6
• /
• 2007

In this study, we analyze the maximum power generation of photovoltaic(PV) module depending on constituent materials and incidence angle dependence of light. To verify characteristics of constituent materials, we made photovoltaic modules with 4 kinds of solar cells and textured glass according to fabrication method. To find the degree of the maximum power generation dependence on intensity of light, Solar Simulator is applied by changing angle of module and light intensity. Through this experiment, to obtain maximum power generation from limited PV modules, it is needed to fully understand constituent materials, fabrication method and dependence of incident light characteristics.

• 한국미생물·생명공학회지
• /
• 제21권4호
• /
• pp.342-347
• /
• 1993

It was proved that the cell growth followed a photo-inhibition model in light-limited turbidostat cultivation, having 1.06 (1/h) of maximum specific growth rate and 0.00094(kcal/$cm^2$/h) and 0.063 (kcal/$cm^2$/h) as half saturation and light inhibition constants, repectively. ${\beta}$-carotene production showed a growth related porcess. And the activation energy of Dunaliella salina was roughly estimated as 12.36 (kcal/mole) in employing Arrhenius relationship. It should also point out that relatively much porduction of ${\beta}$-carotene was observed at hight light intensity with yieding 1.04 (mg-carotene/g-dry cell/day) of specific product production rate while the cell growth was decreased. The optimal conditions of producing ${\beta}$-carotene in turbiodostat cultivation were as follows: $7.5{\times}10^{-3}$(kcal/$cm^2$/h)of light intensity, 2 (mM) and 50(mM) of nitrate and sodium bicarbonate concentrations and 100(ml/h) of $CO_2$ flow rate.

• 한국수산과학회지
• /
• 제51권1호
• /
• pp.64-71
• /
• 2018

This study was conducted to investigate the effects of light intensity and wavelength on the growth of Tetraselmis suecica and Tetraselmis tetrathele. These species were exposed to a blue light-emitting diode (LED; max=450 nm), a yellow LED (max=590 nm), a red LED (max=630 nm) and a fluorescent lamp (three wavelengths). The maximum growth rates (${\mu}_{max}$) of T. suecica and T. tetrathele under a red LED were 1.12/day and 0.95/day, respectively. Under a yellow LED, growth rates were 70% of the values for red wavelength, with low half-saturation constants (Ks). The optimum light source to ensure economically effective and productive growth in a Tetraselmis culture system (Photo-Bioreactor) would thus appear to be a three-phase culture, wherein a yellow LED is used during the lag phase and initial exponential phase to increase growth rate, followed by a red LED during the middle exponential phase to maximize growth rate, and finally a yellow LED again during the late exponential phase and stationary phase to achieve increased yield of useful bioactive substances.

• Journal of Microbiology and Biotechnology
• /
• 제24권8호
• /
• pp.1034-1043
• /
• 2014

This study determined the effect of light intensity and photoperiod on the dry cell weight and total amount of carotenoids in four isolates of purple non-sulfur bacteria obtained from shaded and exposed microhabitats of a mangrove ecosystem in Kota Kinabalu, Sabah, Malaysia. The initial isolation of the bacteria was carried out using synthetic 112 medium under anaerobic conditions (2.5 klx) at $30{\pm}2^{\circ}C$. On the basis of colony appearance, cell morphology, gram staining, motility test, and 16S rRNA gene sequencing analyses, all four bacteria were identified as Afifella marina. One of the bacterial isolates, designated as Af. marina strain ME, which was extracted from an exposed mud habitat within the mangrove ecosystem, showed the highest yield in dry cell weight ($4.32{\pm}0.03g/l$) as well as total carotenoids ($0.783{\pm}0.002mg/g$ dry cell weight). These values were significantly higher than those for dry cell weight ($3.77{\pm}0.02g/l$) and total carotenoid content ($0.706{\pm}0.008mg/g$) produced by the isolates from shaded habitats. Further analysis of the effect of 10 levels of light intensity on the growth characteristics of Af. marina strain ME showed that the optimum production of dry cell weight and total carotenoids was achieved at different light intensities and incubation periods. The bacterium produced the highest dry cell weight of 4.98 g/l at 3 klx in 72 h incubation, but the carotenoid production of 0.783 mg/g was achieved at 2.5 klx in 48 h incubation. Subsequent analysis of the effect of photoperiod on the production of dry cell weight and total carotenoids at optimum light intensities (3 and 2.5 klx, respectively) revealed that 18 and 24 h were the optimum photoperiods for the production of dry cell weight and total carotenoids, respectively. The unique growth characteristics of the Af. marina strain ME can be exploited for biotechnology applications.

• 한국전기전자재료학회논문지
• /
• 제21권1호
• /
• pp.35-43
• /
• 2008

Aviation obstacle lights including controller for the safe night aviation service have applied to high voltage transmission line of which height is from $60{\sim}180 m$, Fresnel lens made by Augustine Fresnel have been applied to light houses, These Fresnel lens were applied to aviation obstacle lights and have been universally used, It was reported that Fresnel lens for aviation obstacle light was used in the first place in Korea in 1987, LEDs have recently been applied to aviation obstacle lights, So, the optimum physical design is essential to the design of aviation obstacle light. In this study, optical and three dimensional modeling of LED module and globe lens were performed, And thermal analysis due to LED thermal source and service thermal condition in high voltage transmission line was performed and was analyzed comparing with experiments, The optimum design process of medium intensity LED aviation obstacle lights was constructed with three dimensional modeling, thermal analysis, and thermal experimental technique.

• 환경위생공학
• /
• 제20권4호통권58호
• /
• pp.51-58
• /
• 2005

Photocatalytic degradation using $TiO_2$ Particles suspended in a reactor was experimentally performed to degrade the formaldehyde of indoor pollutants. Exponential increase of degradation appears to prove light availability due to the scattering of W light by particles themselves. Comparative removal studies of formaldehyde were done in both cases of dipping and spraying immobilized techniques of $TiO_2$ Particles suspended in solution. Experiments were performed under several different experimental conditions such as initial concentration of formaldehyde, UV intensity and concentration of photocatalysts. Optimal conditions to degrade formaldehyde were obtained under the conditions of $30\;mg/cm^2$ concentration of catalyst and UV intensity of 30 Watt at the distance of 30 cm using immobilized technique by dipping coating.

• Journal of Biosystems Engineering
• /
• 제23권6호
• /
• pp.591-598
• /
• 1998

Light intensity and spectral characteristics of different types of fluorescent lamps were tested to investigate their possibility as the artificial lighting sources for the close illumination applied in the transplant production factory. Photosynthetic photon flux densitiy(PPF), illuminance and irradiance for all lamps decreased logarithmically with an increase of the vertical distance from the lighting source. The fluorescent lamp specially designed plant growth (PG lamp) showed a maximum spectral irradiance at the wavelength of 660nm. However, it showed lower irradiance than that of a standard fluorescent lamp at the range of wavelength between 500 and 600nm. On the other hand, PG lamp showed higher PPF and lower illuminance than those of the standard fluorescent lamp. The maximum peak of spectral characteristics for both of the single and twin three-bind fluorescent lamps was shorn at the wavelength of 545m and the next peaks were shown at the wavelength of 610nm and 435nm, respectively. Since the red fluorescent lamp has a narrower peak at the wavelength of 660nm, it may be useful for the supplementary red lighting. For three of standard, single three-band and twin three-band fluorescent lamps, the values of conversion factor for converting illuminance to PPF fell within the narrow range from 76 to 791x/$\mu$molㆍm$^{-2}$ ㆍs$^{-l}$ . However, for PG lamp, it was 29.71x/$\mu$molㆍm$^{-2}$ ㆍs$^{-1}$. Also, the values of conversion factor for converting PPF to irradiance of fluorescent lamp used in this study ranged between 4.85 and 5.34$\mu$molㆍm$^{-2}$ ㆍs$^{-1}$/Wㆍm$^{-2}$ .

• 한국약용작물학회지
• /
• 제22권4호
• /
• pp.295-300
• /
• 2014

This study was carried out to produce more Parasenecio firmus in forest farming. In order to achieve this purpose, it was surveyed the growth and photosynthetic characteristics of P. firmus. Relatively light intensity was controlled by 100%, 60%, 30% and 5% of full sunlight. Height was the highest under 5% of full sunlight. Shoot diameter was the highest in full sunlight. Fresh weight (leaf, stem, root and total) and dry weight (leaf, root and total) were the highest under 30% of full sunlight. S (leaf+stem)/R (root) ratio was the lowest under 30% of full sunlight and the highest under 5% of full sunlight. In leaf characteristics, leaf area, SLA and LAR were getting higher in the lower light level and the highest under 5% of full sunlight ($176.1cm^2$, $420.5cm^2{\cdot}g^{-1}$ and $123.5cm^2{\cdot}g^{-1}$). Especially, leaf area was surveyed higher under 30% of full sunlight in the next. Leaf thickness was getting lower in the lower light level and the lowest under 5% of full sunlight (overall 0.14~0.24 mm). As a result of surveying the whole experiment, P. firmus grows well under 30% and 5% of full sunlight in forest farming.

• 한국재료학회지
• /
• 제28권11호
• /
• pp.680-684
• /
• 2018

We investigate the effect of light intensity and wavelength of a solar cell device using photoconductive atomic force microscopy(PC-AFM). A $POCl_3$ diffusion doping process is used to produce a p-n junction solar cell device based on a polySi wafer, and the electrical properties of prepared solar cells are measured using a solar cell simulator system. The measured open circuit voltage($V_{oc}$) is 0.59 V and the short circuit current($I_{sc}$) is 48.5 mA. Moreover, the values of the fill factors and efficiencies of the devices are 0.7 and approximately 13.6 %, respectively. In addition, PC-AFM, a recent notable method for nano-scale characterization of photovoltaic elements, is used for direct measurements of photoelectric characteristics in limited areas instead of large areas. The effects of changes in the intensity and wavelength of light shining on the element on the photoelectric characteristics are observed. Results obtained through PC-AFM are compared with the electric/optical characteristics data obtained through a solar simulator. The voltage($V_{PC-AFM}$) at which the current is 0 A in the I-V characteristic curves increases sharply up to $18W/m^2$, peaking and slowly falling as light intensity increases. Here, $V_{PC-AFM}$ at $18W/m^2$ is 0.29 V, which corresponds to 59 % of the average $V_{oc}$ value, as measured with the solar simulator. Furthermore, while the light wavelength increases from 300 nm to 1,100 nm, the external quantum efficiency(EQE) and results from PC-AFM show similar trends at the macro scale but reveal different results in several sections, indicating the need for detailed analysis and improvement in the future.

• 방송공학회논문지
• /
• 제21권5호
• /
• pp.749-759
• /
• 2016

방송의 영상콘텐츠가 HDTV로 제작되고 모니터가 대형화되면서 방송 조명에서 피사체의 얼굴 표현이 더욱 중요한 과제가 되었다. HDTV는 빛에 의한 영상 표현의 정밀성의 확대로 피사체의 인물 모델링은 좀 더 부드럽고 깨끗한 영상이미지가 필요하다. 디지털 시대의 인물에 비춰지는 조명 방식도 새로운 변화가 필요하게 되었다. HD 영상에서 피사체의 미적 표현을 위한 언더라이트의 표현 특성을 이용한 인물 모델링 방식이 주목받고 있다. 이에 본 연구에서는 언더라이트 광원의 강도, 거리, 크기가 인물 모델링 특성에 어떻게 영향을 미치는지 실험 측정하여 비교 분석하였다. 실험 결과를 종합적으로 살펴보면 언더라이트의 최적의 효과를 나타내기 위해서 강도는 총 밝기 대비 17%∼25.5%, 거리는 40cm이후, 크기는 최소한 20cm이상이 되어야만 좋은 결과를 가져올 수 있음을 보여주고 있다. 이러한 데이터는 향후 고화질 영상에서 인물을 좀 더 부드럽고 깨끗한 이미지를 얻는데 활용도가 높은 자료가 될 것이다.