• 제목/요약/키워드: intensity attenuation

검색결과 125건 처리시간 0.033초

국내 강우 환경에서 Ka 밴드 위성 링크 버짓 및 지구국 G/T 분석 (Analysis of Ka Band Satellite Link Budgets and Earth Station G/T in Korea Rainfall Environment)

  • 최형재;유경아;박대길;구경헌
    • 한국항행학회논문지
    • /
    • 제23권2호
    • /
    • pp.151-157
    • /
    • 2019
  • 방송 및 통신에 널리 이용하는 정지궤도 위성 통신에서는 경로 상에서 신호 전력이 크게 감소하는 경로 손실 (path loss)이 발생한다. Ka 밴드 주파수는 강우 감쇠에 취약하여 링크 버짓을 계산할 때 강우 감쇠를 고려하는 것이 중요하다. 본 연구에서는 한국의 4개 지역(서울, 인천, 부산, 제주)의 2000년도 이후 강우 데이터를 이용하여 강우 추이를 분석하고 강우 강도 및 강우 감쇠를 계산하였다. 이를 이용하여 천리안 위성의 다운 링크에 대한 위성 링크 버짓 및 수신 성능을 해석하였다. 본 연구에서 18년간의 강우 데이터를 이용하여 연시간율 0.5%인 강우강도일 때 계산한 G/T 결과는 국제전기통신연합(ITU)의 Zone-K 강우 모델의 경우와 비교하여 약 $8.5dBK^{-1}$ 증가하였고, 한국정보통신기술협회(TTA)에서 13년간의 강우 데이터로 계산한 G/T 보다 약 $1.2dBK^{-1}$ 감소하였다. 본 연구의 결과는 국내 설치 위성 지구국의 G/T 설계에 활용될 수 있다.

국내 중규모 지진에 대한 계측진도 추정식 연구 (Study on the Relations to Estimate Instrumental Seismic Intensities for the Moderate Earthquakes in South Korea)

  • 연관희;이강렬
    • 한국지진공학회논문집
    • /
    • 제22권6호
    • /
    • pp.323-332
    • /
    • 2018
  • Recent two moderate earthquakes (2016 $M_w=5.4$ Gyeongju and 2017 $M_w=5.5$ Pohang) in Korea provided the unique chance of developing a set of relations to estimate instrumental seismic intensity in Korea by augmenting the time-history data from MMI seismic intensity regions above V to the insufficient data previously accumulated from the MMI regions limited up to IV. The MMI intensity regions of V and VI was identified by delineating the epicentral distance from the reference intensity statistics in distance derived by using the integrated MMI data obtained by combining the intensity survey results of KMA (Korea Meteorological Administration) and 'DYFI (Did You Feel It)' MMIs of USGS. The time-histories of the seismic stations from the MMI intensity regions above V were then preprocessed by applying the previously developed site-correction filters to be converted to a site-equivalent condition in a manner consistent with the previous study. The average values of the ground-motion parameters for the three ground motion parameters of PGA, PGV and BSPGA (Bracketed Summation of PGA per second for 30 seconds) were calculated for the MMI=V and VI and used to generate the dataset of the average values of the ground-motion parameters for the individual MMIs from I to VI. Based on this dataset, the linear regression analysis resulted in the following relations with proposed valid ranges of MMI. $MMI=2.36{\times}log_{10}(PGA(gal))+1.44$ ($I{\leq}MMI$$MMI=2.44{\times}log_{10}(PGV(kine))+4.86$ ($I{\leq}MMI$$MMI=2.59{\times}log_{10}(BSPGA(gal{\cdot}sec))-1.02$ ($I{\leq}MMI$

침지형 자외선 살균조 설계를 위한 자외선 분포 모델의 개발 및 적용 (Development of an UV Distribution Model for the Design of a Submerged UV Disinfection Reactor and Its Application)

  • 박창연;김성홍;최영균
    • 대한토목학회논문집
    • /
    • 제41권5호
    • /
    • pp.505-512
    • /
    • 2021
  • 침지형 자외선 살균조의 자외선 강도를 계산하기 위한 3차원 모델을 개발하였으며, 실제 하수처리장에 설치되어있는 개수로형 살균조와 관로형 살균조에 각각 적용하여 수치실험을 실시하였다. 모델링을 통해 계산한 살균조의 평균 자외선 강도는 각각 7.87 mW/cm2와 13.09 mW/cm2로 계산되었다. 자외선 조사 시간을 반영하고, 혼합 불균형, 램프 노화, 온도 및 파울링에 의한 감쇄효과를 고려한 자외선 조사량은 각각 21.1 mJ/cm2, 24.8 mJ/cm2로 예측되었는데 이 값은 목표 자외선 조사량인 20 mJ/cm2보다 각각 5 %, 24 % 높은 것으로 예측되었다. 개발한 UV3D 모델을 사용하면 살균조의 조사 시간이나 램프의 출력을 높이지 않고도 수치실험을 통해 평균 자외선 강도가 가장 큰 최적의 램프 위치를 찾을 수 있다. 램프 위치 조정만으로 본 연구에서 적용한 개수로형 살균조와 관로형 살균조의 자외선 조사량은 각각 0.9 %, 0.5 % 향상시킬 수 있다. 개수로형 살균조의 경우 살균조의 체적은 그대로 유지하면서 가로와 세로의 비율을 조정하고, 램프의 위치를 바꾸면 평균 자외선 강도는 현재보다 7.4 % 더 증가한다.

A feasibility study on photo-production of 99mTc with the nuclear resonance fluorescence

  • Ju, Kwangho;Lee, Jiyoung;ur Rehman, Haseeb;Kim, Yonghee
    • Nuclear Engineering and Technology
    • /
    • 제51권1호
    • /
    • pp.176-189
    • /
    • 2019
  • This paper presents a feasibility study for producing the medical isotope $^{99m}Tc$ using the hazardous and currently wasted radioisotope $^{99}Tc$. This can be achieved with the nuclear resonance fluorescence (NRF) phenomenon, which has recently been made applicable due to high-intensity laser Compton scattering (LCS) photons. In this work, 21 NRF energy states of $^{99}Tc$ have been identified as potential contributors to the photo-production of $^{99m}Tc$ and their NRF cross-sections are evaluated by using the single particle estimate model and the ENSDF data library. The evaluated cross sections are scaled using known measurement data for improved accuracy. The maximum LCS photon energy is adjusted in a way to cover all the significant excited states that may contribute to $^{99m}Tc$ generation. An energy recovery LINAC system is considered as the LCS photon source and the LCS gamma spectrum is optimized by adjusting the electron energy to maximize $^{99m}Tc$ photo-production. The NRF reaction rate for $^{99m}Tc$ is first optimized without considering the photon attenuations such as photo-atomic interactions and self-shielding due to the NRF resonance itself. The change in energy spectrum and intensity due to the photo-atomic reactions has been quantified using the MCNP6 code and then the NRF self-shielding effect was considered to obtain the spectrums that include all the attenuation factors. Simulations show that when a $^{99}Tc$ target is irradiated at an intensity of the order $10^{17}{\gamma}/s$ for 30 h, 2.01 Ci of $^{99m}Tc$ can be produced.

LII 신호에 대한 입사 레이저 특성의 영향 (An effect of the characteristics of incident laser beams on laser-induced incandescence signals)

  • 정종수;이교우
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 1997년도 제15회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.45-50
    • /
    • 1997
  • An experimental study on LII signal images from soot particles in a flame has been carried out in order to investigate the effect of the incident laser characteristics. By changing the wavelength of the incident laser beam, the LII signal was saturated at smaller laser power with 532 nm than 1,064 nm. This implies that the larger absorption coefficient of soot particles at 532 nm would influence the LII signal characteristic. Using the deconvolution technique, the projected LII line images were coverted to reconstruct the local LII signals inside the beam. The results show that the LII images at ICCD camera result from the integration of LII signal across the laser beam.

  • PDF

파워흐름해석을 위한 비보존 조인트로 편성된 평판 구조물의 파워투과반사계수 해석 (Wave Transmission Approach of Coupled Plate Structures through Non-conservative Joints for Power Flow Analysis)

  • 송지훈;홍석윤;박영호;박도현;길현권
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 추계학술대회논문집
    • /
    • pp.505-510
    • /
    • 2002
  • The attenuation of waves transmitted through non-conservative joints that are shown in many paractical structures, is affected by the impedance and the orientation of the joint. In this paper, the joints between plate structures are assumed to be modeled as linear spring-dashpot systems and the transmission and reflection of vibration energy in the medium to high frequency ranges are investigated. The calculated power transmission and reflection coefficients are applied to the PFA method for the prediction of energy density and intensity in structures.

  • PDF

중약진 지역에서의 전력송전시스템의 지진재해 신뢰성 평가 (Seismic Reliability Evaluation of Electric Power Transmission Systems in Low and Moderate Seismicity Regions)

  • 고현무;김영호;박원석
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2002년도 추계 학술발표회 논문집
    • /
    • pp.155-162
    • /
    • 2002
  • A technique for the seismic reliability evaluation of electric power transmission systems(EPTS) adapted to ground motion characteristics of Korea has been developed to evaluate reliability indices corresponding to the whole system and to each node within. A network model with nodes and links for EPTS has been established, and a seismic substation-fragility curve obtained from seismic fragilities of power system facilities has been derived. A point source model, the doubly truncated Gutenberg-Richter relationship, and earthquake intensity attenuation formula have been applied to simulate seismic events. Using Monte-Carlo simulation method, the seismic reliability of EPTS is evaluated and, it appeared that seismic effect on EPTS in low and moderate seismicity regions has to be considered.

  • PDF

A Flexible and Tunable Microwave Photonic Filter Based on Adjustable Optical Frequency Comb Source

  • Tran, Thanh Tuan;Seo, Dongsun
    • 전기전자학회논문지
    • /
    • 제19권1호
    • /
    • pp.27-32
    • /
    • 2015
  • A flexible and tunable microwave photonic filter based on adjustable optical frequency comb source is demonstrated. We use a combination of a dual parallel Mach Zehnder modulator and an intensity modulator to generate fifteen comb lines with proper weights to implement a desired filter. The optical comb weights, corresponding to the tap coefficients of the filter, are flexibly changed by adjusting the operation parameters of the modulators. The achieved bandwidth and stopband attenuation of the tunable filter are 0.7 GHz and 20 dB, respectively. In addition, we overcome the undesired low frequency suppression appeared in a conventional scheme by applying a dual parallel Mach Zehnder modulator for single sideband suppressed carrier modulation.

Study on the Link Analysis for Satellite Broadcasting Service Using Ka Band Transponders in the Korean Area

  • 윤기창;김승철;손원
    • 한국위성정보통신학회논문지
    • /
    • 제3권2호
    • /
    • pp.7-12
    • /
    • 2008
  • The study discussed the link analysis for the Ka band satellite broadcasting service in Korea with respect to the transmission schemes based on the DVB-S2 standard. To analyze the effect of the rain fading to the link budget, we estimated the rain attenuation from the measured rainfall intensity in Korea. We analyzed the link budget for the Ka band transponders of Koreasat-3, and DirecTV BSS-99W, and showed the possible link availability with the DVB-S2 transmission schemes for each transponder. Based on the link analysis of the available satellites with the Ka band transponders, we suggested the required EIRP for the satellite which will be employed for the Ka band satellite broadcasting service in Korea.

  • PDF

동일 평면상에서 연성된 직교이방성 평판의 진동파워흐름해석 (Vibration Power Flow Analysis of Coupled Co-planar Orthotropic Plates)

  • 송지훈;박도현;홍석윤;길현권
    • 한국소음진동공학회논문집
    • /
    • 제20권9호
    • /
    • pp.856-862
    • /
    • 2010
  • In this paper, the power flow analysis(PFA) method was developed to predict the vibrational responses of coupled co-planar orthotropic plates in frequencies ranging from medium to high. To cover the power transmission and reflection at the joint of the orthotropic plates, the wave transmission approach is applied with the assumption that all the incident waves are normal to the joint. Through numerical analyses, the power flow energy density and intensity fields of coupled co-planar orthotropic plates were compared with those of classical modal solutions by changing the frequency and internal loss factor, and they show good agreement in terms of the global decay and the attenuation patterns of the energy density.