• Geosystem Engineering
• /
• v.21 no.6
• /
• pp.309-317
• /
• 2018

We employ a three-dimensional indirect boundary element method (BEM) to simulate temperature change around an underground liquefied natural gas storage cavern. The indirect BEM (IBEM) uses fictitious heat source strength on boundary elements as basic variables which are solved from equations of boundary conditions and then used to compute the temperature change at other points in the considered problem domain. The IBEM requires evaluation of singular integration for temperature change due to heat conduction from a constant heat source on a planar (triangular) region. The singularity can be eliminated by a semi-analytical integration scheme. However, it is found that the semi-analytical integration scheme yields sharp temperature gradient for points close to vertices of triangle. This affects the accuracy of heat flux, if they are evaluated by finite difference method at these points. This difficulty can be overcome by a combination of using a direct numerical integration for these points and the semi-analytical scheme for other points distance away from the vertices. The IBEM and the hybrid integration scheme have been verified with an analytic solution and then used to the application of the underground storage.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.3
• /
• pp.269-275
• /
• 2001

In land navigation applications, two kinds of GPS/DR integration schemes are commonly used; the loosely-coupled integration scheme and the tightly-coupled one. The loosely-coupled integration filter has a simple structure and is easy to implement. When the number of visible satellites is insufficient, however, it cannot calibrate the errors of the DR sensors. On the contrary the tigthly-coupled integration filter can sup-press the growth of the error in the DR output even when the visibility is poor. However, it has larger com-putation load due to the state dimension and is inconsistent because of the variation in the measurement dimension. This paper presents a GPS/DR integration scheme with dual integration mode. During when the number of visible satellites is sufficient, the proposed scheme operates in a loosely-coupled integration mode. When the visibility becomes poor, it is switched into a tightly-coupled integration mode. Consequently, the pro-posed scheme can calibrate the DR sensors even when the visibility is poor. In addition, its computation time remains constant even if the number of visible satellites increases. Field experiment results show that the performance of the proposed integration method is almost similar to that of the tightly-coupled one.

• Journal of Mechanical Science and Technology
• /
• v.17 no.7
• /
• pp.986-998
• /
• 2003

In this paper, an adaptive numerical integration scheme, which does not need non-overlapping and contiguous integration meshes, is proposed for the MLPG (Meshless Local Petrov-Galerkin) method. In the proposed algorithm, the integration points are located between the neighboring nodes to properly consider the irregular nodal distribution, and the nodal points are also included as integration points. For numerical integration without well-defined meshes, the Shepard shape function is adopted to approximate the integrand in the local symmetric weak form, by the values of the integrand at the integration points. This procedure makes it possible to integrate the local symmetric weak form without any integration meshes (non-overlapping and contiguous integration domains). The convergence tests are performed, to investigate the present scheme and several numerical examples are analyzed by using the proposed scheme.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.2
• /
• pp.20-29
• /
• 2023

This study suggests integration scheme for agricultural governance of South and North Korea after unification by comparing and analyzing their current agricultural governance, assuming drastic changes of economic system in integration process after unification. The North Korea's critical food shortage will force reformation of its agricultural governance to be the top priority in integration process after unification. The agricultural governance of South and North Korea has comparable structures. However, the North Korea's agricultural governance is extremely inefficient because it is established for political purposes. The integration scheme suggested includes expansion of Rural Development Administration, integration of research institutes, establishment of branch of Korea National University of Agriculture and Fisheries, transformation of existing North Korea's organization into South Korea's system and preparation of training programs for North Korea's officials.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5B
• /
• pp.264-273
• /
• 2005

Nowadays the integration of heterogeneous wireless networks become a hot issue in communications research area. Especiall,y, 3G and WiBro interworking will be introduced soon as users can be offered the most suitable service according to service area and service providers can reduce network construction and operation expenses. In this paper, we propose an interworking scheme for fast handoff between 3G and WiBro networks. The SCI (Smoothly Coupled Integration) scheme proposed in this paper takes advantages of the existing LCI (Loosely Coupled Integration) and TCI (Tightly Coupled Integration) scheme and can offer seamless services by providing fast handoff between 3G and WiBro although each network may work independently. Through extensive computer simulations using OPNET, the efficiency of the proposed scheme has been validated.

• Geotechnical Engineering
• /
• v.14 no.4
• /
• pp.129-140
• /
• 1998

Elasto-plastic finite element analysis of geotechnical boundary value problems necessitate the stress integration for the known strain increments. For the elasto-plastic constitutive model, the stress integration is generally achieved by numerical schemes, because analytical integration is impossible for general strain path. In this case, the accuracy of numerical stress integration has an important role on the overall accuracy of nonlinear finite element solution. In this study, the Sloan's substepping method which is one of explicit integration methods has been adopted and iris applicability has been checked. The unstability and inaccuracy of ifs results initiated from initial stress level were revealed. So. a new modified numerical integration method which employs the basic concept of modified Euler scheme for error control is proposed and accuracy and stability of the solutions are confirmed by triaxial test simulation.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.453-458
• /
• 2004

This study proposes a new two-level condensation scheme for the construction of a reduced system. In the first step, the candidate area is selected for the construction of the reduced system by energy estimation in element-level. In the second step, primary degrees of freedom are selected by sequential elimination from the candidate degrees of freedom linked to the selected elements. Numerical examples demonstrate that the proposed method saves the computational cost effectively and provides a reduced system which predicts the eigenvalues accurately. Moreover, the well-constructed reduced system can present the reliable behavior of the structure under arbitrary dynamic loads comparing to that of global system. Time integration in a reduced system can save the computing time remarkably. Through a few numerical examples, the efficiency and reliability of the proposed scheme are verified.

• Journal of Power Electronics
• /
• v.12 no.3
• /
• pp.439-447
• /
• 2012

In this paper, an input-series auxiliary power supply scheme is proposed, which is suitable for high input voltage and multiple-output applications. The power supply scheme is based on a two-transistor forward topology, all of the series modules have a common duty ratio, all the switches are turned on and off simultaneously, and the whole circuit has a single power transformer. It does not require an additional controller but still achieves efficient input voltage sharing (IVS) for each series module through its inherent transformer-integration strategy. The IVS process of this power supply scheme is analyzed in detail and the design considerations for the related parameters are given. Finally, a 100W multiple-output auxiliary power supply prototype is built, and the experimental results verify the feasibility of the proposed scheme and the validity of the theoretical analysis.

• Korean Journal of Chemical Engineering
• /
• v.35 no.12
• /
• pp.2336-2347
• /
• 2018

The azeotrope of methyl acetate methanol and water was isolated using extractive distillation with water as entrainer. The pressure-swing extractive distillation (PSED) process and vapor side-stream distillation column (VSDC) with the rectifier process were designed to separate the methyl acetate, methanol and water mixture. It was revealed that the VSDC with the rectifier process had a reduction in energy consumption than the PSED process. Four control schemes of the two process were investigated: Double temperature control scheme (CS1), $Q_R/F$ feedforward control of reboiler duty scheme for PESD (CS2), $Q_R/F$ feedback control scheme for VSDC (CS3), the feedback control scheme of sensitive plate temperature of side-drawing distillation column to dominate the compressor shaft speed (CS4). Feed flow and composition disturbance were used to evaluate the dynamic performance. As a result, CS4 is a preferable choice for separation of methyl acetate-methanol-water mixture. A control scheme combining the operating parameters of dynamic equipment with the control indicators of static equipment was proposed in this paper. It means using the sensitive plate temperature of side-drawing column to control the compressor shaft speed. This is a new control scheme for extractive distillation.

• The Journal of Korean Academy of Sensory Integration
• /
• v.7 no.1
• /
• pp.47-57
• /
• 2009

Objective : Purpose of this study is to study how Sensory Integration (SI) Intervention Program affect body-scheme and praxis ability of children with Developmental Disability (DD). Method : The SI intervention was programmed based on the theory of SI by Jean Ayres. Thirty children with DD underwent the SI program for six weeks. The effect of the SI intervention was evaluated in terms of body-scheme and praxis ability. Assessments used in this study are One-Point Imitation Test (OPIT) and 6 Body Puzzle Test (6BPT) for body-scheme; Praxis Test Sheet (PTS) for linguistic order, oral motor control, sequential praxis and Sensory Integration and Praxis Tests (SIPT) for postural praxis. Data of this study was analyzed by the paired t-test to compare before- and after the SI intervention. Results : Results of this study are (1) in the OPIT, there is significant difference on body-scheme ability (p<0.01); (2) in the PTS, there is significant difference on all three items (p<0.01); and (3) in the SIPT, there is significant difference on sensory integration and praxis function. Conclusions : From the results, it is concluded that sensory integration intervention is effective on body-scheme and praxis functions for children with developmental disability.