• The Journal of the Acoustical Society of Korea
• /
• v.14 no.5
• /
• pp.5-10
• /
• 1995

In this paper we present a clustering procedure based on the use of HMM in order to get multiple statistical models which can well absorb the variants of each speaker with different ways of saying words. The HMM-clustered models obtained from the developed technique are applied to the speaker independent isolated word recognition. The HMM clustering method splits off all observation sequences with poor likelihood scores which fall below threshold from the training set and create a new model out of the observation sequences in the new cluster. Clustering is iterated by classifying each observation sequence as belonging to the cluster whose model has the maximum likelihood score. If any clutter has changed from the previous iteration the model in that cluster is reestimated by using the Baum-Welch reestimation procedure. Therefore, this method is more efficient than the conventional template-based clustering technique due to the integration capability of the clustering procedure and the parameter estimation. Experimental data show that the HMM-based clustering procedure leads to $1.43\%$ performance improvements over the conventional template-based clustering method and $2.08\%$ improvements over the single HMM method for the case of recognition of the isolated korean digits.

• The KIPS Transactions:PartD
• /
• v.12D no.1 s.97
• /
• pp.91-102
• /
• 2005

In the past it was generally felt that software quality was the same as product quality. But as the software industry is getting bigger and more complex, it has become hard to develop quality software that meets customers' needs just depending on product quality. Therefore, lately many domestic and foreign companies are making efforts to upgrade product quality by implementing Process Improvement. Measurement in Process Improvement activities enhances the effect of Process Improvement, and also identifies and helps the activities. In support of this paper, research on the measurement program was conducted based on the CMMI adopted by many domestic and foreign companies for their process improvement model. MA process area that deals with measurement process setup is one of the CMMI process areas and was the basis of the structure of the measurement program. This study presents differences of the measurement program for each level of CMMI and how to apply it. The results of this study can help a business to apply CMMI-based Process Improvement by backing up the structure of the measurement program. Furthermore, it can offer a roadmap for progress of the measurement program for each level.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1904-1917
• /
• 2016

The moving average filter (MAF) is widely utilized to improve the disturbance rejection capability of phase-locked loops (PLLs). This is of vital significance for the grid-integration and stable operation of power electronic converters to electric power systems. However, the open-loop bandwidth is drastically reduced after incorporating a MAF into the PLL structure, which makes the dynamic response sluggish. To overcome this shortcoming, some new techniques have recently been proposed to improve the transient response of MAF-based PLLs. In this paper, a comprehensive performance comparison of advanced MAF-based PLL algorithms is presented. This comparison includes HPLL, MPLC-PLL, QT1-PLL, and DMAF-PLL. Various disturbances, such as grid voltage sag, voltage flicker, harmonics distortion, phase-angle and frequency jumps, DC offsets and noise, are considered to experimentally test the dynamic performances of these PLL algorithms. Finally, an improved positive sequence extraction method for a HPLL under the frequency jumps scenario is presented to compensate for the steady-state error caused by non-frequency adaptive DSC, and a satisfactory performance has been achieved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1555-1560
• /
• 2013

The Column type Motor Driven Power Steering(CMDPS) systems are generally equipped among passenger vehicles ensuring better vehicle safety and fuel economy. In general to analyze systems and to develop a controller a full vehicle model from CarSim developed by Mechanical Simulation Incorporation interacting with MDPS control algorithm from Matlab Simulink was concurrently simulated. This paper describes the development of concurrent simulation technique in detail for analyzing Matlab Simulink MDPS control system with a dynamic vehicle system because the specific method has not been revealed in detail. The steering wheel angle input was evaluated and well compared with proving ground experimental data. The comparisons from concurrent simulation show an effective way to develop and validate the control algorithm. This concurrent simulation capability will be efficiently used for CMDPS performance evaluation and logic tuning as well as for vehicle handling performance.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.159-159
• /
• 2017

Ti-6Al-4V alloy have been used for dental implant because of its excellent biocompatibility, corrosion resistance, and mechanical properties. However, the integration of such implant in bone was not in good condition to achieve improved osseointergraiton. For solving this problem, calcium phosphate (CaP) has been applied as coating materials on Ti alloy implants for hard tissue applications because its chemical similarity to the inorganic component of human bone, capability of conducting bone formation and strong affinity to the surrounding bone tissue. Various metallic elements are known to play an important role in the bone formation and also affect bone mineral characteristics. Especially, Zn is essential for the growth of the human and Zn coating has a major impact on the improvement of corrosion resistance. Plasma electrolytic oxidation (PEO) is a promising technology to produce porous and firmly adherent inorganic Zn containing TiO2(Zn-TiO2)coatings on Ti surface, and the a mount of Zn introduced in to the coatings can be optimized by altering the electrolyte composition. In this study, effect of Zn content on the corrosion behavior of Ti-6Al-4V alloy after plasma electrolytic oxidation were studied by SEM, EDS, XRD, AC impedance, and potentiodynamic polarization test. The potentiodynamic polarization and AC impedance tests for corrosion behaviors were carried out in 0.9% NaCl solution at similar body temperature using a potentiostat with a scan rate of 1.67 mV/s and potential range from -1500 mV to +2000 mV. Also, AC impedance was performed at frequencies ranging from 10 MHz to 100 kHz for corrosion resistance.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.2
• /
• pp.184-191
• /
• 2012

Aerodynamic analysis(DATCOM) and radar cross section(RCS) analysis(POFACETS) were integrated for the air-to-surface missile concept design using a design framework. The missile geometry was defined based on the CAD(CATIA) for synchronizing the manufacturing with design processes. Aero/RCS analyses were linked with the CAD process under the ModelCenter framework in order to receive the geometry data automatically. The missile design baseline configuration was selected from ROC(requirement of capability). Then the RCS minimization was performed subject to thelargerthebetter constraint of the missile lift-to-drag ratio. This study demonstrated that various design strategies can be performed efficiently about many missile configurations using this design framework in the missile conceptual design phase.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.3
• /
• pp.215-224
• /
• 2002

This paper describes EGSE design for the small satellite such like KOMPSAT-2 satellite. Recent design trend of small satellite and EGSE is to take short development time and less cost. For this purpose, the design for KOMPSAT-2 satellite and EGSE are not much modified from KOMPSAT-1 heritage. It means that it is able to be accommodated the verified hardware and software modules used in KOMPSAT-1 satellite program if possible. The objective of EGSE is to provide hardware and software for efficient electrical testing of integrated KOMPSAT-2 satellite in three general categories. (1) Simulators for ground testing (e.g. solar-simulation power, earth scenes, horizons and sun sensor). (2) Ground station type satellite data acquisition and processing test sets. (3) Overall control of satellite using hardline datum. In KOMPSAT (KOrea Multi-Purpose SATellite) program, KOMPSAT-2 EGSE was developed to support satellite integration and test activities. The KOMPSAT-2 EGSE was designed in parallel with satellite design. Consequently, the KOMPSAT-2 EGSE was based on the KOMPSAT-1 heritage since the spacecraft design followed the heritage. The KOMPSAT-2 baseline was elaborated by taking advantage of experience from KOMPSAT-1 program. The EGSE of KOMPSAT-2 design concept is generic modular design with preference in part selection with commercial off-the-shelf which were proven from KOMPSAT-1 programs, flexible/user friendly operational environment (graphical interface preferred), minimized new design and self test capability.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.153-158
• /
• 1998

Since the mid-1990′s, researches on 3D GIS have been regarded as one of main issues both in the academic sites and commercial vendors; recently, some prototyped systems or the first versioned software systems of commercial basis are being reported and released. Unlike conventional 2D GIS, which consists in intelligent structured GIS or desktop GIS, every 3D GIS has its own distinguished features according to data structure-supporting capability, GIS-styled functionality, external database accessibility, interfacing extents with 2D GIS, 3D visualization/texture mapping ability, and so forth. In this study, technical aspects related to system development, SERI-Web3D GIS ver. 1.2, are explained. Main features in this revised 3D GIS can be summarized: 2-tier system model(client-server), VGFF(Virtual GIS File Format), internal GIS import, Feature manager(zoning, layering, visualization evironment), Scene manager(manage 3D geographic world), Scene editor, Spatial analyzer(Intersect, Buffering, Network analysis), VRML exporter. While, most other 3D GISes or cartographic mapping systems may be categorized into 3D visualization systems handling terrain height-field processing, 2D GIS extension modules, or 3D geometric feature generation system using orthophoto image: actually, these are eventually considered as several parts of "real 3D GIS". As well as these things, other components, especially web-based 3D GIS, are being implemented in this study: Surface/feature integration, Java/VRML linkage, Mesh/Grid problem, LOD(Level of Detail)/Tiling, Public access security problem, 3-tier architecture extension, Surface handling strategy for VRML.

• Proceedings of the Technology Innovation Conference
• /
• 1992.12a
• /
• pp.119-155
• /
• 1992

Traditionally, the target of manufaturing technology strategy was derived in a efficiency, cost and productivity. So most activities of the manufacturing brought focus into the engineering technology, equipments and research and improvement of new products to maximize the efficiency. As a resell of this legacy, most of the activities of manufacturing has been executed on the method of quality improvement, development of new equipment to incense the efficiency and the research of materials for new products. Those trends, however overlook the operation management activities which is very important as a assets in competitive strategy. But the market enviornment of morden manufacturing companies faced to the uncertainty and complexity. So they need capability of competition which requires new concept of manufacturing technology strategy to grasp the competitive advantages. In this point of view, this paper deal with the empirical study in korean manufacturing technology strategy of the electic and electronic industry. For the empirical study, check list was made to survey the 98 manufacturing companies. The analysis procedures are as below. First, identify the manufacturing technology group an product structure group by each variable. Second manufacturing technology variables are segmented into product technology and vertical integration, suborder and infrastructure, to analyse the decision making pattern which derive the strategy groups. Third, by the fitness analysis between product structure group and manufacturing technology group, the economic results of a growth rate of sale and a profit rate of sale are tested. In this approach, fitness analysis between product structure group and manufacturing technology group show, as a whole, the no significant values in economic results of the company. But investigating the statistical values shows the trend that econmic result of the complany is somewhat higher when the degree of fitness of manufacturing technology strategy by product structure has high value. Concluding the remarks, the competitive advantages of company lies not in the efficiency of manufacturing systems but in the way of the structure and decision making pattern of the manufacturing system. And the cons i stoney between strategy target and manufacturing technology strategy, and the consistency of manufacturing technology strategy and product structure are the term of competitive advantages.

• Journal of Korea Water Resources Association
• /
• v.33 no.3
• /
• pp.289-298
• /
• 2000

In order to minimize the impact of water hammer In a pipeline, a determination of optimum position of hydraulic structures with best operation of pressure relief valve was explored at the Seobyun pumping station. Method of characteristics is used to simulate a surge impact originating from abrupt stop of pumping operation in a pipeline. Genetic algorithm shows a powerful capability in searching a global solution, especially for a nonlinear problem The application results suggests that the maximum positive pressure can be relaxed by decreasing the opening time of pressure relief valve, meanwhile the maximum negative pressure can be relaxed by increasing the opening time of pressure relief valve. This study shows that the integration of a genetic algorithm with a transient analysis technique such as method of characteristic can improve the design of hydraulic structure in a pipe network.