• 제목/요약/키워드: intaglio

검색결과 45건 처리시간 0.038초

Comparative evaluation of sodium hypochlorite and microwave disinfection on dimensional stability of denture bases

  • Nirale, Rutuja Madhukarrao;Thombre, Ram;Kubasad, Girish
    • The Journal of Advanced Prosthodontics
    • /
    • 제4권1호
    • /
    • pp.24-29
    • /
    • 2012
  • PURPOSE. To compare the effect of sodium hypochlorite and microwave disinfection on the dimensional stability of denture bases without and with relining. MATERIALS AND METHODS. A brass die was prepared by simulating an edentulous maxillary arch. It was used to fabricate 1.5 mm and 3 mm of thickness denture bases (n = 40). The 1.5 mm of thickness-specimens (n = 20) were relined with 1.5 mm of autopolymerizing relining resin. Five holes were prepared over crest of ridge of brass die with intimately fitting stainless steel pins which were transferred to the intaglio surface of specimens during fabrication of denture bases. For calculation of dimensional changes in denture bases, differences between the baseline area before and after disinfection of the specimens were used. The denture bases without and with relining were divided into 2 groups (each n =20). Data were analyzed using student paired 't'and unpaired 't'test. RESULTS. Microwave disinfection produces significant shrinkage in both denture bases without relining (t =17.16; P<.001) and with relining (t = 14.9; P<.001). Denture bases without relining showed more shrinkage when compared with relined denture bases after microwave disinfection (t = 6.09; P<.001). The changes in dimensional stability after sodium hypochlorite disinfection were not significant for both denture bases without relining (t = 2.19; P=.056) and denture bases with relining (t = 2.17; P=.058). CONCLUSION. Microwave disinfection leads to increased shrinkage of denture bases without and with relining. Chemical disinfection with sodium hypochlorite seems to be a safer method of disinfection with regards to physical properties such as changes in dimensional stability.

The effects of different surface treatments on the shear bond strengths of two dual-cure resin cements to CAD/CAM restorative materials

  • Turker, Nurullah;Buyukkaplan, Ulviye Sebnem;Basar, Ebru Kaya;Ozarslan, Mehmet Mustafa
    • The Journal of Advanced Prosthodontics
    • /
    • 제12권4호
    • /
    • pp.189-196
    • /
    • 2020
  • PURPOSE. The aim of the present study was to investigate the effects of surface treatments on the bond strengths between polymer-containing restorative materials and two dual-cure resin cements. MATERIALS AND METHODS. In the present study, rectangular samples prepared from Lava Ultimate (LU) and Vita Enamic (VE) blocks were used. The specimen surfaces were treated using CoJet sandblasting, 50 ㎛ Al2O3 sandblasting, % 9 HF (hydrofluoric) acid, ER,Cr:YSGG laser treatment, and Z-Prime. Dual-cure resin cements (TheraCem and 3M RelyX U 200) were applied on each specimen's treated surface. A micro-tensile device was used to evaluate shear bond strength. Statistical analysis was performed using the SAS 9.4v3. RESULTS. While the bond strength using TheraCem with LU or VE was not statistically significant (P=.164), the bond strength using U200 with VE was statistically significant (P=.006). In the TheraCem applied VE groups, Z-Prime and HF acid were statistically different from CoJet, Laser, and Sandblast groups. In comparison of TheraCem used LU group, there was a statistically significant difference between HF acid and other surface treatments. CONCLUSION. The bonding performance between the restorative materials and cements were material type-dependent and surface treatment had a large effect on the bond strength. Within the limitations of the study, the use of both U200 and TheraCem may be suggested if Z-prime was applied to intaglio surfaces of VE. The cementation of LU using TheraCem is suitable after HF acid conditioning of the restoration surfaces.

Effect of different tooth preparation designs on the marginal and internal fit discrepancies of cobalt-chromium crowns produced by computer-aided designing and selective laser melting processes

  • Yu, Na;Dai, Hong-Wei;Tan, Fa-Bing;Song, Jin-Lin;Ma, Chao-Yi;Tong, Xue-Lu
    • The Journal of Advanced Prosthodontics
    • /
    • 제13권5호
    • /
    • pp.333-342
    • /
    • 2021
  • PURPOSE. To evaluate the impact of five different tooth preparation designs on the marginal and internal fit discrepancies of cobalt-chromium (CoCr) crowns produced by computer-aided designing (CAD) and selective laser melting (SLM) processes. MATERIALS AND METHODS. Five preparation data were constructed, after which design crowns were obtained. Actual crowns were fabricated using an SLM process. After the data of actual crowns were obtained with structural light scanning, intaglio surfaces of the design crown and actual crown were virtually superimposed on the preparation. The fit-discrepancies were displayed with colors, while the root means square was calculated and analyzed with one-way analysis of variance (ANOVA), Tukey's test or Kruskal-Wallis test (α = .05). RESULTS. The marginal or internal color-coded images in the five design groups were not identical. The shoulder-lip and sharp line angle groups in the CAD or SLM process had larger marginal or internal fit discrepancies compared to other groups (P < .05). In the CAD process, the mean marginal and internal fit discrepancies were 10.0 to 24.2 ㎛ and 29.6 to 31.4 ㎛, respectively. After the CAD and SLM processes, the mean marginal and internal fit discrepancies were 18.4 to 40.9 ㎛ and 39.1 to 47.1 ㎛, respectively. The SLM process itself resulted in a positive increase of the marginal (6.0 - 16.7 ㎛) and internal (9.0 - 15.7 ㎛) fit discrepancies. CONCLUSION. The CAD and SLM processes affected the fit of CoCr crowns and varied based on the preparation designs. Typically, the shoulder-lip and sharp line angle designs had a more significant effect on crown fit. However, the differences between the design groups were relatively small, especially when compared to fit discrepancies observed clinically.

Comparing accuracy of denture bases fabricated by injection molding, CAD/CAM milling, and rapid prototyping method

  • Lee, Suji;Hong, Seoung-Jin;Paek, Janghyun;Pae, Ahran;Kwon, Kung-Rock;Noh, Kwantae
    • The Journal of Advanced Prosthodontics
    • /
    • 제11권1호
    • /
    • pp.55-64
    • /
    • 2019
  • PURPOSE. The accuracy of denture bases was compared among injection molding, milling, and rapid prototyping (RP) fabricating method. MATERIALS AND METHODS. The maxillary edentulous master cast was fabricated and round shaped four notches were formed. The cast was duplicated to ten casts and scanned. In the injection molding method, designed denture bases were milled from a wax block and fabricated using SR Ivocap injection system. Denture bases were milled from a pre-polymerized block in the milling method. In the RP method, denture bases were printed and post-cured. The intaglio surface of the base was scanned and surface matching software was used to measure inaccuracy. Measurements were performed between four notches and two points in the mid-palatal suture to evaluate inaccuracy. The palatine rugae resolution was evaluated. One-way analysis of variance was used for statistical analysis at ${\alpha}=.05$. RESULTS. No statistically significant differences in distances among four notches (P>.05). The accuracy of the injection molding method was lower than those of the other methods in two points of the mid-palatal suture significantly (P<.05). The degree of palatine rugae resolution was significantly higher in the injection molding method than that in other methods (P<.05). CONCLUSION. The overall accuracy of the denture base is higher in milling and RP method than the injection molding method. The degree of fine reproducibility is higher in the injection molding method than the milling or RP method.

Evaluation of trueness and precision of removable partial denture metal frameworks manufactured with digital technology and different materials

  • Leonardo Ciocca;Mattia Maltauro;Elena Pierantozzi;Lorenzo Breschi;Angela Montanari;Laura Anderlucci;Roberto Meneghello
    • The Journal of Advanced Prosthodontics
    • /
    • 제15권2호
    • /
    • pp.55-62
    • /
    • 2023
  • PURPOSE. The aim of this study is to evaluate the accuracy of removable partial denture (RPD) frameworks produced using different digital protocols. MATERIALS AND METHODS. 80 frameworks for RPDs were produced using CAD-CAM technology and divided into four groups of twenty (n = 20): Group 1, Titanium frameworks manufactured by digital metal laser sintering (DMLS); Group 2, Co-Cr frameworks manufactured by DMLS; Group 3, Polyamide PA12 castable resin manufactured by multi-jet fusion (MJF); and Group 4, Metal (Co-Cr) casting by using lost-wax technique. After the digital acquisition, eight specific areas were selected in order to measure the Δ-error value at the intaglio surface of RPD. The minimum value required for point sampling density (0.4 mm) was derived from the sensitivity analysis. The obtained Δ-error mean value was used for comparisons: 1. between different manufacturing processes; 2. between different manufacturing techniques in the same area of interest (AOI); and 3. between different AOI of the same group. RESULTS. The Δ-error mean value of each group ranged between -0.002 (Ti) and 0.041 (Co-Cr) mm. The Pearson's Chi-squared test revealed significant differences considering all groups paired two by two, except for group 3 and 4. The multiple comparison test documented a significant difference for each AOI among group 1, 3, and 4. The multiple comparison test showed significant differences among almost all different AOIs of each group. CONCLUSION. All Δ-mean error values of all digital protocols for manufacturing RPD frameworks optimally fit within the clinical tolerance limit of trueness and precision.

고려시대 금속공예 선각(線刻)기법의 기술과 유형 (Technique and Type of Line Expression in Goryeo Dynasty Metal Craft Engraving)

  • 김세린
    • 헤리티지:역사와 과학
    • /
    • 제53권3호
    • /
    • pp.24-41
    • /
    • 2020
  • 선각기법(線刻技法)은 기물 표면에 문양이나 글자 등을 기면보다 낮게 파 새기는 금속공예의 시문기법이다. 선사시 대부터 현재까지 사용되고 있는 이 기법은 금속공예의 시문 기법 중 가장 오랜 역사를 지니고 있다. 또 기법의 특성에 기인해 가장 보편적인 기법으로 광범위하게 쓰였다. 단독 또는 입사(入絲)와 같은 다른 기법의 시문 공정에 선행 기법으로 사용되거나, 타출(打出)이나 어자문(魚子紋) 등 타 기법과 병용되었다. 이처럼 선각은 금속공예품의 제작 및 시문 기법 전반에 걸쳐 유기성을 갖고 전개되었다. 본 논문의 연구 주제인 고려시대 금속공예에서의 선각기법은 통일신라시대까지 구축되어 계승된 기술의 전통을 기반으로 사용되었다. 또 당시 금속기의 유행 경향과 사용풍조, 중국과의 외교관계에 따른 인적, 물적 유입과 기술 교류 등 사회상과 결합되어 이전보다 다채롭게 전개되었다. 이러한 고려시대 선각기법의 기술과 시문 유형을 분석하기 위해 본 논문은 먼저 선각의 범주와 세부 기법을 고찰하고, 고려시대 이전까지의 흐름을 짚었다. 그리고 유물과 문헌을 바탕으로 고려 당대의 용어를 분석해 당시 기법에 대한 인식을 고찰해보았다. 또, 선각의 세부 기법과 시문 과정을 토대로 기법의 시문 기술을 살펴본 후 현전하는 유물의 재질을 물성과 강도를 기준으로 분류해 기법의 활용 유형을 분석했다. 특히 고려시대는 전쟁이나 사회 내 유행 등 시대상에 기인해 성행한 금속 재료의 사용 비중과 양상에 차이가 분명하기에 재질로 유형을 나누어 유물에서의 기법 양상을 분석했다. 그동안 선각기법은 유물에서 너무나 보편적으로 사용된 기법이라는 인식으로 인해 장식 효과가 극대화된 입사나 타출, 투조 등 여타 금속공예의 시문 기법에 비해 조망 받지 못했던 것이 사실이다. 하지만 기법이 지닌 보편성은 전 시대에 걸친 넓은 사용을 전제로 한다. 실제 선각은 우리나라와 여러 문화권의 현전하는 금속 유물에서 다양한 문화적 특징을 반영해 나타난다. 한편으로는 오랜 기간 당대의 공예 문화를 구현한 무형의 유산인 기술로 이어져 조각장과 선각 장식을 사용하는 무형문화재 여러 분야에 현재까지 전승되고 있다. 이처럼 선각기법이 지닌 보편성이 시사하는 사회문화적 의미는 크다고 할 수 있다.

모노타입과 모노프린트의 판화 매체적 특성 연구 (Printing Medium Characteristic Study of Monotype and Monoprint)

  • 송대섭
    • 조형예술학연구
    • /
    • 제11권
    • /
    • pp.79-108
    • /
    • 2007
  • "Printing is an Art of reproduction & a Technique of However printing has extended its limitation from a genre of reproduction itself and now it stands on the turning point as an art such as painting or sculpture which expresses artist's originality. Early Printing has had relations in depth with press printing in terms of information recording, preservation, and transmission. It was acknowledged value in a way of information satisfaction different from how it is valued as a pure art today. But, later printing has transferred its function from a mean of reproduction to pure art due to the development of printing skills and photography invention. It can be said that the concept of modern printing is taking over its genealogy as a creative work not as just printing. Also its expression capability is widen to dimensional printing and high-tech multimedia from original tradition techniques. As we discussed above, modern painting is very open to various changes. This modern painting aspect can be seen as an extended interpretation of 'board' concept. This dissertation raises a question why monotype and monoprint couldn't secure its position in printing history in spite of numerous artists' tryouts in its way. Monotype and monoprint fundamentally based on intaglio technique in its history. Yet, its systematic study hasn't been worked out. This is because of the lack of recognition of monotype and monoprint's originality as printing. Especially in monoprint, it has known as an early stage in copperplate printing process which is an attempt to solve the technique limitation or trial work for edition. Likewise the reason why monotype and monoprint remains at the edge of printing border ambiguously is because of conceptual, technical characteristics which are against traditional printing. In traditional printing, the concept of board is important as a method of reproduction. Different from the fact, monotype and monoprint accept the form of medium 'board' conceptually out of limited condition as mentioned. Thus monotype and monoprint hasn't stand out for several reasons until late 20th century when it started come out to public as people starts to have interests that works from famous artists are actually based on monotype and monoprint. This dissertation likes to step into the monotype and monoprint theoretically which is not well known in domestic and try to study the meaning of monotype and monoprint as a printing medium which is also hasn't been considered sincerely. For this study the process follow as below. First, look into how monotype and monoprint has a concept and history. Next, check differences through comparison with traditional printing and how printing can be understood in what aspects at the same time. After, verify how monotype and monoprint have influence on the acceptance of extended concept of 'board'. This study will show the expressional possibility of monotype and monoprint which has already known as 'tableau printing' in today's situation where adventurous experiments of printing medium are going on with the development of technology.

  • PDF

Fitting accuracy of ceramic veneered Co-Cr crowns produced by different manufacturing processes

  • von Maltzahn, Nadine Freifrau;Bernhard, Florian;Kohorst, Philipp
    • The Journal of Advanced Prosthodontics
    • /
    • 제12권2호
    • /
    • pp.100-106
    • /
    • 2020
  • PURPOSE. The purpose of this in vitro study was to evaluate the fitting accuracy of single crowns made from a novel presintered Co-Cr alloy prepared with a computer-aided design and computer-aided manufacturing (CAD/CAM) technique, as compared with crowns manufactured by other digital and the conventional casting technique. Additionally, the influence of oxide layer on the fitting accuracy of specimens was tested. MATERIALS AND METHODS. A total of 40 test specimens made from Co-Cr alloy were investigated according to the fitting accuracy using a replica technique. Four different methods processing different materials were used for the manufacture of the crown copings (milling of presintered (Ceramill Sintron-group_cer_sin) or rigid alloy (Tizian NEM-group_ti_nem), selective laser melting (Ceramill NPL-group_cer_npl), and casting (Girobond NB-group_gir_nb)). The specimens were adapted to a resin model and the outer surfaces were airborne-particle abraded with aluminum oxide. After the veneering process, the fitting accuracy (absolute marginal discrepancy and internal gap) was evaluated by the replica technique in 2 steps, before removing the oxide layer from the intaglio surface of the crowns, and after removing the layer with aluminum oxide airborne-particle abrasion. Statistical analysis was performed by multifactorial analysis of variance (ANOVA) (α=.05). RESULTS. Mean absolute marginal discrepancy ranged between 20 ㎛ (group_cer_npl for specimens of Ceramill NPL) and 43 ㎛ (group_cer_sin for crowns of Ceramill Sintron) with the oxide layer and between 19 ㎛ and 28 ㎛ without the oxide layer. The internal gap varied between 33 ㎛ (group_ti_nem for test samples of Tizian NEM) and 75 ㎛ (group_gir_nb for the base material Girobond NB) with the oxide layer and between 30 ㎛ and 76 ㎛ without the oxide layer. The absolute marginal discrepancy and the internal gap were significantly influenced by the fabrication method used (P<.05). CONCLUSION. Different manufacturing techniques had a significant influence on the fitting accuracy of single crowns made from Co-Cr alloys. However, all tested crowns showed a clinically acceptable absolute marginal discrepancy and internal gap with and without oxide layer and could be recommended under clinical considerations. Especially, the new system Ceramill Sintron showed acceptable values of fitting accuracy so it can be suggested in routine clinical work.

Ancient Seaports on the Western Coast of India: The Hub of the Maritime Silk Route Network

  • DAYALAN, DURAISWAMY
    • Acta Via Serica
    • /
    • 제3권2호
    • /
    • pp.49-72
    • /
    • 2018
  • The extensive maritime trade network between the Harappan and Mesopotamian civilizations as early as the $3^{rd}$ millennium BCE is a testimony to the long maritime trade history of India. From the dawn of the historical epoch, the maritime trade network of India expanded extensively. The findings of a large number of coins, pottery, amphorae and other materials from Italy and various other European countries, west Asia, China, Korea, Africa, the Arabian Peninsula, Sri Lanka, Southeast Asia and Far-East countries in India, particularly in the coastal regions, are a testimony to the dynamic maritime trade of India with other countries in the early period. Similarly, pottery, sculptures, inscriptions and other materials of Indian origin are also found in those countries. The depiction of different types of ships on the coins, paintings, sculptures, seals and sealing, exhibit the variety of vessels used for navigation and other purposes in the early period. The over 7500 km-long coastline of India is well known for its seaports located at river mouths or outlets to the sea. The Periplus Maris Erythraei, Ptolemy, and Indian literary sources mention many seaports on the western coast of India. Interestingly, archaeological investigations in many of these port towns have yielded material evidence exhibiting their dominant role in transoceanic trade and commerce with many countries in the early period. This paper discusses in detail all the major ancient seaports on the western coast of India and their maritime trade activities. At the outset, the paper briefly deals with the Harappan's maritime network, their seaports and the type of ships of that period. Following this, the maritime trade network of India during the historical period with various countries in the east and west, the traces of Indian influence and materials abroad and foreign materials found in India, the products exported from India, the trade winds and navigational devices and the depiction of ships on the coins, paintings, and sculptures of the period are discussed in detail. After briefly highlighting the coastline of India and its favourable nature for safe anchorage of ships and the strategic position of the seaports of western India, an extensive account of the major ancient seaports of western India like Barygaza, Ashtacampra, Gundigar, Kammoni, Khambhat, Bardaxema, Suparaka, Calliena, Semylla, Sanjan, Naura, Tyndis, Muziris, Nelcynda and other seaports, and their maritime trade activities are given based on archaeological excavations and explorations, literature, epigraphy, foreign accounts, and numismatic evidence.

조선왕실 현판 글자의 금색 안료와 재현 실험 연구 (Pigments in the Letters of Hanging Boards of the Joseon Royal Court and Reproduction Experiments)

  • 이혜연;이민혜;이희승
    • 헤리티지:역사와 과학
    • /
    • 제56권3호
    • /
    • pp.118-135
    • /
    • 2023
  • 조선왕실의 현판은 궁궐, 종묘 등 왕실과 관련된 건물에 걸어 건물의 위계와 성격을 나타낸다. 현판은 조선왕실 의궤에 제작 방법이나 재료 등을 기록하고 있어 당시 제작기술이나 재료 변화를 연구하는데 중요한 자료이다. 그러나 현재 남아 있는 현판은 전각의 화재나 전란 등으로 여러 차례 개·보수 되면서 원형과 재료가 변화되었다고 추정된다. 조선왕실의 현판은 어제·어필 현판이 많아 검은색 바탕에 금색 글자로 이루어진 형태가 주요하다. 본 연구는 조선왕실 현판 중 금색 글자로 추정되는 44점을 대상으로 글자에 남아 있는 안료를 분석하였다. 분석 결과를 바탕으로 글자 표면에 남아 있는 금색 안료의 현재 상태와 검출된 구성성분에 따라 분류하였다. 글자 안료의 분석 결과 금(Au) 성분이 주요하게 검출된 현판은 양각 24점과 음각 5점이며, 양각 15점은 황동(Cu, Zn) 성분이 주요하게 검출되었다. 황동 성분이 검출된 현판 중 일부는 금색 안료가 아닌 청록색 안료만 남아 있는 상태이다. 황동 안료는 문헌에 기록이 없고 현재 단청 안료로 사용하고 있지 않아 황동 안료의 적용 가능성을 알아보기 위해 재현실험을 실시하였다. 재현실험은 재료의 한계로 황동안료의 적용 유무와 사용 방법을 확인하기 어려웠으나 앞으로 황동 안료의 사용 시기와 방법에 대한 연구가 필요한 것으로 판단된다.