• Geomechanics and Engineering
• /
• v.23 no.6
• /
• pp.523-533
• /
• 2020

The current study focuses on the effect of the end shape of steel pipe piles on installation effort and bearing resistance using the pressing method of installation under dense ground conditions. The effect of pile rotation on the installation effort and bearing resistance is also investigated. The model steel piles with a flat end, cone end and cutting-edge end were used in this study. The test results indicated that cone end pile with the pressing method of installation required the least installation effort (load) and showed higher ultimate resistance than flat and cutting-edge end piles. However, pressing and rotation during cutting-edge end pile installation considerably reduces the installation effort (load and torque) if pile penetration in one rotation equal to the cutting-edge depth. Inclusion of rotation during pile installation reduces the ultimate bearing resistance. However, if penetration of the cutting-edge end pile equal to the cutting-edge depth in one rotation, the reduction in ultimate resistance can be minimized. In comparing the cone and cutting-edge end piles installed with pressing and rotation, the least installation effort is observed in the cutting-edge end pile installed with penetration rate equal to the cutting-edge depth per rotation.

• The KIPS Transactions:PartA
• /
• v.10A no.6
• /
• pp.685-690
• /
• 2003

The application for PDA as a new wireless Internet device is variously developed to improve the function of PDA, and the application software must be installed to PDAs. In addition. when the power supply of PDA becomes fully discharged, all data stored in the RAM (Random Access Memory) could be vanished, and then the application programs should be reinstalled. This paper presents an automatic installation system of application program, PAIS (PDA Automatic Installation System). It is designed to solve the problem of PDA that PDA's users have to install the application programs on their PDA themselves. When this engine is applied, PDA users can save the time and effort for installation. It's convenient for the PDA users. The PDA and application software company can save the cost to create materials to explain the installation process.

• The Journal of Society for e-Business Studies
• /
• v.8 no.3
• /
• pp.165-176
• /
• 2003

Instead of existing cell phones, PDAs are observed as leading wireless Internet devices recently Numerous applications are developed by extended usage of PDAs and it should be installed appropriately according to devices. Furthermore, when battery is discharged, all data stored in RAM(Random Access Memory) becomes obsolete. So it should be recovered or reinstalled from flash memory, backup media or something. In this paper, we present an automatic application installation system(PAIS : PDA Automatic Installation System) to solve problems that users have to install applications by themselves whenever it is necessary. With this system, users feel comfortable by saving time and effort to install each applications and application development companies save cost needed to make materials illustrating installation process. Consequently PAIS may flourish wireless Internet business.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.3
• /
• pp.1-7
• /
• 2015

Korea's electricity supply and demand policy has focusing on electricity demand side management instead of the expanding supply and a lot of effort for LED(Light Emitting Diode) at the time. This paper calculated the optimal subsidy for LED spread. For this purpose, it analyzed the impact on spread of the lighting appliances each subsidy level from BDM(Bass Diffusion Model) and predicted the number of lighting appliances according to subsidy level in the future. The case study is calculated susidy for satisfaction of LED target using the suggested model in the future and verified availability.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.5 no.3
• /
• pp.54-63
• /
• 1991

This paper describes an effort to develope a microcomputer-based parameter measurement system for a brushless DC motor. Back EMF equation is derived from back EMF waveform of a brushless DC motor. To minimize error the due to the ripple component in the measured armature current, digital averaging filter is employed. The whole identification process of signal generation, measurement parameter determination is fully automated. A new identification algorithm for the brushless DC motor parameters is developed. New parameter correction method is proposed using the deadzone current and the time to reach the peak current. In the proposed correction method, the measured current is in excellent agreement with the estimated current.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.265-269
• /
• 2005

본 논문에서는 최대 견인력 제어를 위해서 최소 차원 부하 토크 외란 관측기를 이용하여 점착력 계수를 추정하고 추정한 점착력 계수의 미분치를 PI 토크 제어하는 Anti-slip제어를 제안한다. 최소차원 부하 토크 외란 관측기는 회전자의 위치 정보와 토크 전류의 정보를 이용하여 부하 외란토크를 추정하고, 부하 외란 토크에 철도차량 상수를 이용하여 점착력 계수를 추정한다. 또한 부하토크외란 관측기는 구조가 간단하며, 시스템의 외란 및 각종 제어이득, 시스템의 상수 변화에 대해서도 견실한 견인력 제어 특성을 가지고 있다. 이와 같은 시스템의 모델링과 전동기 토크에 대한 회전자의 위치 정보를 이용하여 최소차원 부하 토크 외란 관측기의 상태변수인 점착력 계수를 추정하고, 추정한 점착력 계수의 미분치를 PI토크 Anti-Slip제어하여, 최대 견인력 제어가 되도록 하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.7
• /
• pp.1-6
• /
• 2008

In industrial fields, human works are being replaced by robots. However, as the use of robots is limited in the process industry where they are operated fixedly, humanoid robots with wide applications need to be developed. Currently a great deal of research is being conducted on humanoid robots with the object of replacing humans in the workplace. However, because of the lack of relevant hardware and difficulty in mechanical parts, only very simple and limited progress is being made. In an effort to overcome these limitations, the purpose of the present study is to develop a kinematical mechanism and a controller. To this end, master arms with 3 degrees-of-freedom for the shoulders and the arms were composed which were able to reproduce human-like motions by simulating the characteristics of joint variables and the trajectory of the end-effector.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.10
• /
• pp.114-122
• /
• 2010

Today, effort to reduce greenhouse gas emissions is to be strengthened worldwide. And environment-friendly vehicle is being magnified because of energy saving and minimization of environmental pollution. In the future, the construction of EV charging facilities will be needed for Prevalence of EV in the Public Housing. So in this paper, we survey and analyze data of power usage and owned vehicles on the existing public housing according to season, day and time. And, we reviewed appropriate configuration ratio according to three kind of case. Besides, we calculate Prevalence Estimates of EV and utilization factor based on analysis result. And finally, we try to study for case model.

• 전기의세계
• /
• v.22 no.6
• /
• pp.24-32
• /
• 1973

When applying capacitors to distribution line, an effort must be made to determine the economic benefits resulting from the installation of a capacitor. There have been many papers and articles published on the economics of capacitors. Most of these are special cases, or have so many qualifications that they are not much use for other cases unless very careful attention is given to minute details. A general economic analysis on a distribution line is very complicated problem. Consequently, a diagram solution is illustrated for determining the economic condenser and applying resonably well for the distribution line with any load division.

• Journal of the Ergonomics Society of Korea
• /
• v.3 no.2
• /
• pp.9-12
• /
• 1984

The effort made today by the man to adapt himself to Computer technology is considerable. On the other hand, one may expect that, by the way it is conceived, he also adapts the machine to the man. The choice and installation of a Computer not only requires a thorough analysis regarding its efficiency, but also a study of the office environment in order to achieve optimal and tactile comfort for the user. This report deals with aspects for the integration of ergonomics into the process of keyboard design topics.