• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.76-77
• /
• 2015

In construction industry, management of construction factors such as cost, schedule, quality and safety is the most important key for delivering successful projects. According to the Smart Market Report, a magazine specialized in construction industry, recently said 'Off-site Prefabrication' is a significant trend related with construction productivity in global construction industry. It is a kind of practice shift from On-site to Off-site. A lot of general contractors in oversea have been using 'Multi-trade MEP Ceiling Rack Prefabrication' method for getting benefits such as decreased cost & schedule and increased labor productivity. Thus, in this paper, critical management factors at each phase from design to installation was derived by researching case studies. Forwardly, it can be a basic guideline for applying Multi-trade MEP Ceiling Rack Prefabrication in Korea construction industry.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5B
• /
• pp.511-516
• /
• 2011

In this paper, we present the AMI System mentioned as one of the main application areas in the M2M. To enable the AMI, it is essentially required to install, deploy and manage all the devices. Especially, Device Management technology is considered to be suitable for these AMI due to its advantages like, easy installation, remote FW/SW upgradeability. We investigate the fundamental operation of the DM and the design of the DM in the AMI is presented.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.235-240
• /
• 2003

In this paper, the fire safety management plan and the emergency action program for the railway safety improvement were reviewed. In the fire safety management plan, a series of preventive methods answering to such as a smoke exhaust installation, a fire warning device and a guide inducement will be come into preparation. Also, the damage reducing methods such as complement of fire safety equipments, establishment of refuge & escape system, consolidation of real-time control on fire response and operation procedure will be required for early repressing fire and minimizing fatality.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.1
• /
• pp.21-32
• /
• 2015

High rising of the buildings offers a number of risk factors than ever before with regard to fire prevention. Especially in the construction site of high-rise buildings, people waste golden-time during the evacuation because temporary fire fighting facilities are not installed and transferred to a large fire because of fire suppression failure. In this study, the researcher derives the problems of fire protection in high-rise buildings construction sites and proposed the measures in such the legal aspects as fire building construction code and etc. There are the legal improvements such as orders of construction suspension in the problems of fire safety, appointing fire safety manager, temporary fire protection installation standards, enhancing penalty provisions regarding the use of fire, operating self fire brigade, confirming on-site after completing fire-protection facalities, establishment or strengthening special fire-protection investigations.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.1
• /
• pp.196-200
• /
• 2015

The switching noise in the power electronics of the power conversion equipment (Power Conditioning System) for large energy storage devices are generated. Since the burst-level transient noise from being generated in the power system at a higher power change process influences the control circuit of the low voltage driver circuit. Noise may cause the malfunction of the control device even if no dielectric breakdown leads to a control circuit. To overcome this, this paper proposes the installation of an additional nano-surge protection device on the power supply DC output circuit of the battery management unit.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.05a
• /
• pp.1656-1660
• /
• 2006

Distributed coordination function(DCF) is the primary random access mechanism of IEEE 802.11, which is the basic protocol of wireless LAN based on the CSMA/CA protocol. It enables fast installation with minimal management and maintenance costs and is a very robust protocol for the best effort service in wireless medium. The current DCF, however, is known to be unsuitable for real-time applications such as voice message transmission. In this paper, we focus on the performance issues of IEEE 802.11 which accommodate the prioritized messages. Existing results use the initial window size and backoff window-increasing factor as tools to handle the priority of the messages. Instead, we introduce a novel scheme which chooses the backoff timer with arbitrary probabilities. By this, one can greatly reduce the backoff delay of the lower priority messages without degrading the performance of higher priority.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.147-148
• /
• 2012

According to the analysis report of construction fall accident, situation not installed safety facilities caused the largest of disaster in temporary structure. Therefore, actionable measures will be needed identifying the installation of safety facilities immediately. In this study proposed plan by the safety facilities to effectively visualize, supervision can be easily for reduce fall accident. This system can be used BIM and augmented reality technology by combining in the field in real-time. Through this study, safety facilities management is improved and expected to prevent a accident.

• Journal of Korean Society of Transportation
• /
• v.14 no.4
• /
• pp.77-90
• /
• 1996

Recently existing the road traffic low is requlated by hump standard, which is established throuth the actual england TRRL(Transpodt and Road Research Laboratory) experiment. The determined standard has been utilized, however, wihtout the test on of our street and its drivers driving characteristics. Even with the utilization, the appropriate before and after management, is not constituted. In Spite of minimum speed limit, in many case, the utilization itself is questionalble rather than the purpose of restraining speed limit or reducing vehicle confacts. Along with hump consideration, social attention is focused due to series of personal law suit(traffic accident) field against the negligence of local organization management. Therefore counter measure of safe transportation facility is urgently required. With consideration of above background, the purpose of this research is to develop the hump that is appropriate with our transportation environment. This can be achieved thr ugh analysis of hump effectiveness, examination of drivers awamess, facilitation/management problems, and various problems in verticle acceleration.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.277-282
• /
• 2012

A Smart TV device is either a television set with integrated internet capabilities or a set-top box for television that offers more advanced computing ability and connectivity than a contemporary basic television set. In recent years, there has been a popularity rose up on Smart TV (Smart Television) usage at home. This paper present the intelligent production status boards using features and functions of smart TV in shop floor. With the proposed status boards, we can reduce installation and operating costs of the existing production status boards. In addition, This article present the system that can line monitoring without equipments as CC TV.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.1
• /
• pp.79-86
• /
• 2013

In this paper which it is relating to the DSRC system based road side equipment, we propose the protocol stack architecture of road side equipment and the process structure of the main RM, L7 and LLC layers which is road side equipment device as well. And also we design the signal flow and data-transfer process as well between road side equipment and on board equipment to describe the installation process between road side equipment and von board equipment based on DSRC system. Thus, it is possible to provide various application services between intelligent transportation systems of road side equipment and local server, as well as it enables the local server managing the memorys of on board equipment which entry in service area thru the road side equipment.