• 대한설비공학회지:설비저널
• /
• 제16권2호
• /
• pp.176-184
• /
• 1987

The purpose of this research is to study the characteristics of the coefficient of perform-ance (COP) of the small absorption refrigeration system. This experimental study is performed with two selected variables, the temperature of the generator and the input temperature of the cooling water. In order to determine the input temperature of the generator which gives maximum COP, the experimental data are obtained with controlling the temperature of the generator in the range of $20-32^{\circ}C$ of the temperature of the cooling water. The range of the generator heat suppling temperature which gives maximum efficiency is about $90-95^{\circ}C.$ The temperature range depends on the characteristics of the equipment unit. The most important result in this experiment is the trends of the COP in accordance with the variation of these temperatures. This trend will furnish the informations and knowledges for designing and operating the absorption refrigerator.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.377-380
• /
• 2002

When it calculates the optimum price of filter coefficient, the many operation quantity is necessary. Is like that the real-time control is difficult and the hardware embodiment expense is big. The case which does not know advance information of input signal or the case where the statistical nature changes with change of surroundings environment is necessary the adaptive filter. Every hour to change a coefficient automatically and system in order to reach to the condition of optimum oneself, the fact that is the adaptive filter. When it does not the quality of input signal or it does not know the environment of surroundings every hour changing, it does not emit not to be, in order to collect, the fact that is the adaptive filter. The case of the Acoustic Echo Canceler does thousands filter coefficients in necessity. It reduces a many calculation quantity to respect, it uses the IIR filter from hour territory. Also it uses the block adaptive filter which has a block input signal and a block output signal. The former there is a weak point where the stability discrimination is always demanded. Consequently, The block adaptive filter is researched plentifully. This dissertation planned the block MADF adaptive filter used to MADf algorithm.

• 펄프종이기술
• /
• 제42권4호
• /
• pp.45-55
• /
• 2010

In order to investigate the structures and growth patterns of pulp and paper industries of Korea, the input-output tables of the year 1995, 2000, 2005 and 2007 were analyzed in this papers. The production inducement coefficients of these industries have grown during the designated period. In 2007, the value of production induced by pulp industry was estimated to be 343,8 billion won. Paper and paper product industries were estimated to induce the production of other industries by 7,281,6 and 8,515.9 billion won, respectively. The import inducement effect of pulp industry was estimated to be larger than that of paper and paper product industries. Analysis on the forward linkage effects indicated that paper and paper product industries were more sensitive to the change in demand of other industries than pulp industry.

• 한국전자파학회논문지
• /
• 제10권6호
• /
• pp.866-878
• /
• 1999

본 논문에서는 원형 디스크와 두 개의 환 디스크로 구성된 페라이트 공진기를 갖는 스트럽라인 서률레이 터를 설계하고 제작한다. 순환 그런함수 가법을 이용하여 각 단자의 전자계를 구하고 입력 임피던스와 산란 행렬을 유도한다. 페라이트 공진기의 각 디스크에 대한 매질 배치에 따른 서율레이션 특성, 바이어스 필드의 세기에 따른 서률레이션 특성과 포트 단자의 폭에 따른 서률레이션 특성을 비교. 분석한다. 설계된 제원을 사용하여 제작한 서률레이터의 통과대역 주파수는 1.55 GHz에서 2.95 G Hz까지이고 입력 단의 반사계수 $S_{11}$ 은 공진접 2.38 GHz에서 30 dB, 아이솔레이션 단에서 입력 단으로의 전송계수 $S_{21}$은 - 28 dB로 나타났다

• 대한설비공학회지:설비저널
• /
• 제17권4호
• /
• pp.357-368
• /
• 1988

An application of thermal response coefficient method for obtaining thermal load on stud-frame walls in a typical house is presented. A set of stud-frame walls is two-dimensional heat conduction transients with composite structure. The ambient temperature on the right-hand face of the stud-frame walls is a typical day-cycle input and the room temperature on the left-hand face is a constant input. The desired output is thermal load at the left-hand face. The time-dependent ambient temperature is approximated by a continuous, piecewise-linear function each having one hour interval. The conduction problem is spatially discretized as 8 computer modelings by finite elements to obtain thermal response coefficients. The discretization and round-off errors can be neglected in the range of adequate number of nodes. A 60-node discretization is recommended as the optimum model among 8 computer modelings. Several sets of response coefficients of the stud-frame walls are generated by which the rate of heat transfer through the walls or some temperature in the walls can be calculated for different input histories.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.410-423
• /
• 2019

Fire suppression using a water mist nozzle directly above an n-Heptane pool in a fire compartment with a door opening was numerically investigated using the Fire Dynamics Simulator (FDS) for the purpose of application in nuclear power plants. Input parameters for the numerical simulation were determined by experimental measurements. Water mist was activated 10 s after the fire began. The sensitivity analysis was conducted for three input parameters: total number of cubic cells of 6032-2,926,400, droplets per second of 1000-500,000, and extinguishing coefficient of 0-100. In a new simple calibration method of this study, the extinguishing coefficient yielding the fire suppression time closest to that measured by experiments was found for use as the FDS simulation input value. When the water mist jet flow made contact with the developed fire, the heat release rate instantaneously increased, and then rapidly decreased. This phenomenon occurred with a displacement of the flame near the liquid fuel pool. Changing the configuration of the door opening with different aspect ratios and opening ratios had impact on the maximum value of the heat release rate due to the flame displacement.

• ETRI Journal
• /
• 제41권5호
• /
• pp.637-647
• /
• 2019

Separating highly correlated users can reduce the loss caused by spatial correlation (SC) in multiuser multiple-input multiple-output (MU-MIMO) systems. However, few accurate analyses of the loss caused by SC have been conducted. In this study, we define signal-to-interference-plus-noise ratio (SINR) loss to characterize it in multiuser multiple-input single-output (MU-MISO) systems, and use coefficient of correlation (CoC) to describe the SC between users. A formula is deduced to show the accurate relation between SINR loss and CoC. Based on this relation, we propose a user selection method that utilizes CoC to minimize the average SINR loss of users in massive MU-MISO systems. Simulation results verify the correctness of the relation and show that the proposed user selection method is very effective at reducing the loss caused by SC in massive MU-MISO systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2240-2245
• /
• 2003

In this paper, the controller design by coefficient diagram method (CDM) for controlling the trolley position, load-swing angle and hoisting rope length of the overhead crane system simultaneously is proposed. The overhead crane system is a MIMO system consisting of two inputs and three outputs. Its mathematical model is nonlinear with coupling characteristics. This nonlinear model can be approximated to obtain a linear model where the first input mainly affects the trolley position and the load-swing angle while the second input mainly affects the hoisting rope length. In order to utilize the CDM concept for assigning the controllers, namely PID, PD and PI controllers separately, the model is approximated to be three transfer functions in accordance with trolley position, the load-swing angle and the hoisting rope length controls respectively. The satisfied performances of the overhead crane system controlled by the these controllers and fast rejection of the disturbance effect occurred at the trolley position are shown by simulation and experimental results.

• 한국광학회지
• /
• 제6권2호
• /
• pp.130-134
• /
• 1995

이득 선폭이 넓고 가공이 쉬원 고출력 제이저의 증폭 이득 매질로 유리한 Nd:glass 이득 매질의 소신호 이득 계수를 측정하고 이 Nd:glass를 이용하여 제작한 cavity-dumping형 레이저의 출력 특성을 조사하였다. 소신호 이득 계수를 측정하기 위해 Nd:glass, Pockels cell, 편광분할기 등을 포함하는 공진기를 구성하였으며, 측정된 소신호 이극 계수는 전기 입력 에너지가 100J일 때 $0.088 cm_{-1}$ 공진기의 왕복 내부 손실은 56%였다. Cavity-dumping형 레이저 공진기는 곡률반경이 2m인 두개의 전반사경과 Nd:glass, Pickels cell, 편광분할기, $\lambda/4$ plate 등으로 구성되었으며 제작된 레이저의 출력 에너지는 전기 입력 에너지가 140J일 때, 최대 0.85J이었고 출력 레이저 펄스폭은 8ns였다.

• 유통과학연구
• /
• 제14권10호
• /
• pp.21-27
• /
• 2016

Purpose - This study analyzes economic relations and mutual influence in the global equipment manufacturing industry (EMI) and China's influence. Research design, data, and methodology - Data were collected from the World Input-Output Database (WIOT), looking at 16 countries. The sample time period was 2002-2011. Influence and motivation coefficients were calculated. Results - 1) China's EMI showed a very strong influence coefficient, even surpassing world industrial powers like Japan, the USA, Germany, and Korea. 2) As for influence on added-value, China's EMI motivation coefficient was ranked third in 2011, which meant it had a negligible effect on added-value. 3) From 2002 to 2011, both the influence and motivation coefficients of China's EMI rose. Conclusions - China's EMI has strong influence and motivation coefficients. It has a significant impact on the world EMI, especially on the total output of the global EMI. Additionally, during 2002 to 2011, the ranking of China's EMI motivation coefficient improved year over year, and its economic efficiency obviously improved. By 2011, China's EMI's international influence was second only to the US and Japan.