• Elastomers and Composites
• /
• v.54 no.2
• /
• pp.142-148
• /
• 2019

In this study, the effects of filler particle size and shape on the physical properties of silicone rubber composites were investigated using inorganic fillers (Minusil 5, Celite 219, and Nyad 400) except silica, which was already present as a reinforcing filler of silicone rubber. Fillers with small particle sizes are known to facilitate the formation of the bound rubber by increasing the contact area with the polymer. However, in this experiment, the bound rubber content of Celite 219-added silicone composite was higher than that of Minusil 5-added silicone composite. This was attributed to the porous structure of Celite 219, which led to an increase in the internal surface area of the filler. When the inorganic fillers were added, both thermal decomposition temperature and thermal stability were improved. The bound rubber formed between the silicone rubber and inorganic filler affected the degree of crosslinking of the silicone composite. It is well-known that as the size of the reinforcing filler decreases, the reinforcing effect increases. However, in this experiment, the hardness of the composite material filled with Celite 219 was the highest compared to the other three composites. Furthermore, the highest value of 2.19 MPa was observed for 100% modulus, and the fracture elongation was the lowest at 469%. This was a result of excellent interaction between Celite 219 filler and silicone rubber.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.9
• /
• pp.35-41
• /
• 2022

The moisture content of many inorganic sludges is less than 70% during dewatering. Hence, a mono or piston pump cannot feed the sludge dryer. Thus, most inorganic sludge should be moved to a landfill or recycled directly without any reduction method. This development was invented to apply cyclone dryers using air and specially designed for the continuous injection of sludge sources by negative pressure and high air velocity for low moisture inorganic matter. Therefore, wastewater sludge and raw water treatment sludge discharged from various industrial fields might be settled by this development. The cyclone dryer was commercialized useful as moisture reduction equipment. This development was applied using a sludge injection system for sludge feeding and under the cooperation of ejector design computational fluid dynamics. Furthermore, this paper presented good ejector model results, blowing an airflow of 264 m³/min at an actual performance test.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.541-546
• /
• 1998

To study the possibility of agricultural utilization of the sewage sludge and the converter slag, the chemical properties of soil, the growth response of corn plant and uptake of inorganic nutrients in plant tissues were investigated by application of the composts made of the sewage sludge and converter slag. Uptake of inorganic nutrients in stem and leaf of corn plant were decreased by applications of the composts. The content of heavy metals in soil and corn plant were investigated, but the results of show that the concentrations of heavy metals are much low.

• Microbiology and Biotechnology Letters
• /
• v.23 no.1
• /
• pp.87-90
• /
• 1995

A process of organically bound germanium preparation was developed for healthy food using inorganic germanium adapted Saccharomyces cerevisiae. Adaptations of Saccharomyces cerevisiae against inorganic germanium were successively carried out through stepwise increase of GeO$_{2}$ concentration in order to produce high quantities of germanium bound yeast. Productivity of yeast and quantities of germanium in yeast were obtained 70.2 g/l and 9780 ppm, repectively, when adapted yeast and fed batch culture were used. Germanium taken-up yeast is to be organically bound germanium by evidence of no difference of germanium content after dialysis.

• The Korean Journal of Ecology
• /
• v.17 no.2
• /
• pp.113-119
• /
• 1994

Vertical and horizontal distribution and seasonal changes of fine roots as well as inorganic nitrogen content in soil were determined in Quercus mongolica and Quercus acutissima stands in Mt. Taemosan, Seoul. The vertical distribution of fine rooth phytomass showed a power-functional decrease as descending soil depth. Fine root phytomass was 170 g $DM/m^2$(46%) and 225 g $DM/m^2$(47%) in top soil of 5 cm depth, and 370 g $DM/m^2$ and 480 g $DM/m^2$ from soil surface to 50 cm depth in Q. mongolica and Q. acutissima stands, respectively. Fine roots in relation to the distance from the nearest tree were evenly distributed horizontally in both stands. Fine roots phytomass in top soil of 5 cm depth reached a peak in June, and thereafter decreased gradually in both stands. Patterns of seasonal changes in fine root phytomass were closely related to inorganic nitrogen and moisture content.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10c
• /
• pp.139-144
• /
• 1998

This study is intended to devolop the self waterproof agents for high performance concrete by analyzing the properties of fresh and hardened mortar with various addition ratios of the inorganic admixture and zinc stearate. As the results of the test, the flow and air content increase with the addition of expansive additives. When the replacement rate of silica fume increases, the flow decreases for the increased viscidity. And the flow and sir content decrease with the addition of zinc stearate. At hardened state, the compressive strength, tensile strength and flexual strength decrease with the addition of expansive additives and zinc stearate. With the increase of silica fume's replacement, they show a little decrease at early age and then increase gradually. Also, absorption and permeability show a steep decrease when zinc stearate is added, and a slack decrease with the replacement of silica fume.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.128-129
• /
• 2014

In this study, flowability of the mortar added with length change and combination of steel and inorganic fiber has been tested to evaluate the performance of fiber-reinforced mortar. The following results could be made as the conclusion. Early age flow of the mortar has been decreased when fibers added. Slump also decreased with the adding of fibers. For the air content, comparing with Plain, all the specimens with fibers showed higher air content than Plain., Addition of every kinds fibers showed the similar EIS test results.

• Journal of Plant Biology
• /
• v.19 no.3
• /
• pp.71-84
• /
• 1976

In order to observe the phosphate metabolism in chloroplast, the contents of inorganic phosphate and various compounds in chloroplast from spinach leaf tissues were investigated during the reaction in the light and dark in the reaction mixture and the turnover of phosphate in chloroplast was compared with that of whole cell system: 1. The phosphorus of DNA in chloroplast appears to be transferred from inorganic phosphate, while in whole cell system from phosphate pool. 2. $^{32}P-phosphate$ content of acid soluble fraction in chloroplast as well as in whole cell system was more increased in the light than dark during the reaction. It was noted to be caused by the stimulation of sugar phosphate synthesis in the light. 3. It was confirmed that polyphosphate exists in chloroplast as well as whole cell. Acid insoluble polyphosphate content in whole cell system was significantly decreased during the reaction and the similar tendency was also observed in chloroplst. It is, therefore, considered that acid insoluble polyphosphate also play an most important role as a phosphate pool respectively in chloroplast and in cytoplasm. 4. Protein and lipid phosphorus in chloroplast as well as whole cell system were transferred from acid insoluble polyphosphate.

• Journal of Industrial Technology
• /
• v.35
• /
• pp.31-34
• /
• 2015

The purpose of the study was to investigate the mechanical properties (diametral tensile strength, flexural strength, compressive strength, Vickers hardness) of 4 kinds of composit resins; Bis-GMA based composit, Bis-EMA based composit, Bis-GMA/UDMA based composit, and Bis-EMA/UDMA based composit, The composit resin based Bis-GMA showed stronger mechanical properties than Bis-EMA. It was found that the addition of UDMA to both Bis-GMA based composit and Bis-EMA based composit highly improved mechanical properties. However, the mechanical properties of the composit resins prepared in this study were lower than those of the commercialized products in market(Charmfil flow(Denkist), Quadrant flow(CAVEX)), since the composit resins prepared in this study has much lower inorganic filler content of 43wt% comparing with 50~70wt% inorganic filler content of the commercialized products.

• Elastomers and Composites
• /
• v.50 no.4
• /
• pp.279-285
• /
• 2015

This study examined the mechanical properties and the flame retardant properties of CR rubber containing inorganic flame retardant with various contents of aluminium trihydroxide (ATH, $Al(OH)_3$). The content of aluminium trihydroxide was added in 0, 30, 50, 70 and 100 phr for T1~T5 samples. It was found that increasing the amount of addition over 30 phr resulted in decreasing the mechanical properties. On the other hand in oxygen index measurements T1 sample showed a value of 38.6%, indicating the improvement of flame retardant properties showed a value of 49.7~64.2%. In case of burn test, it was confirmed that CR rubber containing over ATH 50phr content showed performance corresponding to that of first grade fire-resistance.