• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.130-134
• /
• 2011

This study aims at the structural safety with optimum design of automotive bumper in order to minimize the maximum stress and displacement and reduce the minimum quantity of bumper material. As the forces of X and Y direction increase, equivalent stress and displacement increase. The displacement of X direction force increases more than 20% in comparison with Y direction force. But the equivalent stress of Y direction force increases more than 60% in comparison with X direction force. The mass of inner bumper becomes minimum and the mass of outer bumper becomes maximum when the force of 4000N is applied on the direction inclined at $45^{\circ}$ toward outer bumper. In 50% range of increase and decrease at X and Y direction force, the optimum forces of X and Y component becomes 2368.8N and 1538.8N respectively. And the masses of inner and outer polypropylene bumper become $3.3227{\times}10^{-2}kg$and $3.5538{\times}10^{-2}kg$respectively.

• 유공압시스템학회:학술대회논문집
• /
• 유공압시스템학회 2010년도 춘계학술대회
• /
• pp.39-43
• /
• 2010

It is hard and complex to analytically derive a volumetric displacement formula of a gerotor hydraulic motor because geometric shape of its rotors is complicate. An analytical method about the volumetric displacement is proposed in this work, which is relatively easy and based upon two physical concepts. The first one is energy conservation between hydraulic input energy of the motor and mechanical output energy. The second concept is torque equilibrium with respect to inner and outer rotors. The proposed formula about the volumetric displacement is verified by comparing an analytical displacement and a numerical displacement for an example specification of the motor. The numerical displacement is calculated through a kind of CAD technology. The analytical formula can be utilized in analysis and design of hydraulic gerotor motors.

• 한국산학기술학회논문지
• /
• 제17권3호
• /
• pp.432-437
• /
• 2016

본 연구는 금속 주름관, 내부 스프링, 금속마개 등으로 구성된 소형 벨로우즈 세트의 거동에 대하여 연구하였다. 벨로우즈는 자동차용 에어컨의 제어를 위한 전자기제어밸브의 핵심 부품으로써 기계적 하중과 외부 압력에 대하여 민감하고 정확하게 작동하여야 한다. 벨로우즈 설계 인자 도출을 위하여, 소형 인장시험기를 이용하여 벨로우즈 내부 스프링의 스프링 상수를 측정하고, 벨로우즈 세트의 하중-변위 선도를 측정하였다. 내부 스프링의 하중-변위 관계는 선형관계를 나타내었다. 벨로우즈 세트의 하중-변위 관계는 변위가 작을 때는 낮은 기울기를 가지고 하중이 증가하다가 이후 선형으로 증가하는 특성을 나타내었다. 실측 결과를 바탕으로 유한요소해석을 수행하여 외부 주름관의 유효 물성을 도출하고 유한요소 모델링을 확보하였다. 원통형의 형상을 고려하여 축대칭 모델을 적용하였으며, 주름관은 쉘 요소를 적용하였다. 확보한 모델을 활용하여 냉매 압력에 따른 벨로우즈의 거동에 대한 연구를 수행하였다.

• 센서학회지
• /
• 제27권2호
• /
• pp.82-85
• /
• 2018

This paper proposes a new temperature-compensative displacement sensor with a pair of fiber Bragg gratings (FBG) attached to the inner and outer surfaces of an elastic metal band. The sensor can be also used as a temperature sensor with high sensitivity. The FBG pair shifted Bragg wavelengths in the same direction according to changes in the temperature. However, because the pressure of the metal band shifted a pair of Bragg wavelengths in the opposite direction, the displacement sensor could compensate for the effect of the temperature change in the proposed FBG pair. Results of the experiments showed that the two FBG displacement sensors responded linearly and symmetrically with respect to the displacement, and the displacement could be obtained using the difference between the two Bragg wavelengths.

• Structural Engineering and Mechanics
• /
• 제45권1호
• /
• pp.129-144
• /
• 2013

Load-carrying capacity of combined members consisted of inner and sleeved tubes subjected to axial compression was investigated in this paper. Considering the initial bending of the inner tube and perfect elasto-plasticity material model, structural behavior of the sleeved member was analyzed by theoretic deduction, which could be divided into three states: the elastic inner tube contacts the outer sleeved tube, only the inner tube becomes plastic and both the inner and outer sleeved tubes become plastic. Curves between axial compressive loads and lateral displacements of the middle sections of the inner tubes were obtained. Then four sleeved members were analyzed through FEM, and the numerical results were consistent with the theoretic formulas. Finally, experiments of full-scale sleeved members were performed. The results obtained from the theoretical analysis were verified against experimental results. The compressive load-lateral displacement curves from the theoretical analysis and the tests are similar and well indicate the point when the inner tube contacts the sleeved tube. Load-carrying capacity of the inner tube can be improved due to the sleeved tube. This paper provides theoretical basis for application of the sleeved members in reinforcement engineering.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 제4회 압출 및 인발가공 심포지엄
• /
• pp.99-106
• /
• 2001

The design for cold extrusion dies is very important, because the die insert is subjected to very high radial and hoop stresses. The design of cold extrusion dies has many constrained conditions. In this paper, the used assumptions are such that the yield strength of each ring is selected according to the allowable tensile or compressive hoop stress in each ring and the maximum allowable inner pressure, when yielding occurs in one ring of the dies, is obtained by the proposed equation. In order to obtain design variables, such as diameter ratios and interferences, using the maximum inner pressure, the flexible tolerance method was used for shrink-fitted thick-walled cylinders. ANSYS APDL was used to perform the repeated analysis of deformation of the dies due to the variation of the design variables. The response surface methodology is utilized to analyze the relationship between the design variables and the maximum radial displacement of the die insert during extrusion. From the results, it is found that outer diameter of the die Insert has the largest effect on the minimization of maximum radial displacement at the inner surface of the dies.

• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.167-174
• /
• 2005

The design for cold extrusion dies is very important, because the die insert is subjected to very high radial and hoop stresses. The design of cold extrusion dies has many constrained conditions. In this paper, the used assumptions are such that the yield strength of each ring is selected according to the allowable tensile or compressive hoop stress in each ring and the maximum allowable inner pressure, when yielding occurs in one ring of the dies, is obtained by the proposed equation. In order to obtain design variables, such as diameter ratios and interferences, using the maximum inner pressure, the flexible tolerance method was used for shrink-fitted thick-walled cylinders. ANSYS APDL was used to perform the repeated analysis of deformation of the dies due to the variation of the design variables. The response surface methodology is utilized to analyze the relationship between the design variables and the maximum radial displacement of the die insert during extrusion. From the results, it is found that outer diameter of the die insert has the largest effect on the minimization of maximum radial displacement at the inner surface of the dies.

• Coupled systems mechanics
• /
• 제12권2호
• /
• pp.127-149
• /
• 2023

A theoretical method is developed to analyze the free vibration of an elastic annular plate in contact with an ideal liquid. The displacement potential functions of the contained liquid are expressed as a combination of the Bessel functions that satisfy the Laplace equation and the liquid boundary conditions. The compatibility condition along the interface between the annular plate and the contained liquid is taken into account to consider the fluid-structure coupling. The dynamic displacement of the wet annular plate is assumed to be a combination of dry eigenfunctions, allowing for prediction of the natural frequencies using the Rayleigh-Ritz method. The study investigates the effect of radial liquid boundary conditions on the natural frequencies of the wet annular plate, considering four types of liquid bounding: outer container bounded, outer and inner bounded, inner bounded, and radially unbounded. The proposed theoretical method is validated by comparing the predicted wet natural frequencies with those obtained from finite element analysis, showing excellent accuracy. The results indicate that the radial liquid bounding effect on the natural frequencies is negligible for the axisymmetric vibrational mode, but relatively significant for the mode with one nodal diameter (n =1) and no nodal circle (m' = 0). Furthermore, the study reveals that the wet natural frequencies are the largest for the plate with an inner bounded cylinder among the radial liquid boundary cases, regardless of the vibration mode.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.147-155
• /
• 2001

A new displacement type web position control system for cold mills using QFT is presented. The control system features an inner-outer cascaded system in which the inner loop provides the position tracking control of the hydraulic system and the outer loop provides the position regulation control of the web. By the sensitivity analysis and computer simulation, it is verified that the proposed control system has better robust stability and performance than the conventional control system.

• Architectural research
• /
• 제23권1호
• /
• pp.11-17
• /
• 2021

A concrete-filled circular steel tube beam was fabricated, and a bending test was performed to analyze its failure modes, displacement ductility, bending-shear strength, and load-central deflection relationship. For the bending test, the installation position of the shape memory alloy (SMA) inside and outside the double-skin steel tube was used, and the rebar installation position, the concrete strength, the mixing of fibers, and the inner-outer diameter ratio as the main parameters. The test results showed that the installation positions of the reinforcements inside and outside the double-skin steel tube and the inner-outer diameter ratio of the steel tube affected the ductility, maximum load, and failure mode. In general, the specimen made of general concrete with SMA installed outside and inside (OI) the double-skin steel tube showed the best results.