• 유공압시스템학회논문집
• /
• 제8권2호
• /
• pp.8-16
• /
• 2011

It is hard and complicated to analytically derive the volumetric-displacement formula of a gerotor pump/motor. Analytical formulas for calculating the volumetric-displacement are derived in this work, which is relatively easy and based upon vane lengths. The vane lengths mean the distances from axis of inner rotor or outer rotor to contact points between inner and outer rotors. Two kinds of formula were studied for two different kinematic motions of rotors. The first one is the case that outer rotor is fixed in space and inner rotor is in mixed motion of planetary revolution and rotation with respect to the spinning axis. And the second is the case that both inner and outer rotors simultaneously rotate. The proposed formula is verified through comparison with volumetric-displacement obtained from numerical CAD calculation.

• 드라이브 ㆍ 컨트롤
• /
• 제10권2호
• /
• pp.13-22
• /
• 2013

It is difficult to analytically derive a volumetric displacement formula of gerotor hydraulic pump/motor because geometric shape of rotors is complicated. An analytical method about the volumetric displacement is proposed in this work, which is relatively easy and based upon two physical concepts. The first one is energy conservation between hydraulic energy of the pump/motor and mechanical input/output energy. The second concept is torque equilibrium with respect to inner and outer rotors. The formula about the volumetric displacement is derived for the common case of inner and outer rotors rotate with respect to fixed axes. The formula is verified by comparing another analytical displacement formula, and it is numerically verified by comparing numerical results, which is calculated for geometric specification of a motor. The numerical displacement is calculated through CAD software program and MATLAB program. The proposed analytical formula can be utilized in analysis and design of hydraulic gerotor motors.

• 한국멀티미디어학회논문지
• /
• 제17권8호
• /
• pp.937-945
• /
• 2014

Multi-modal biometric system can use another biometric trait in the case of having deficiency at a biometric trait. It also has an advantage of improving the performance of personal identification by using multiple biometric traits, so studies on new biometric traits have continuously been performed. The inner face of finger is a relatively new biometric trait. It has two major features of knuckle lines and wrinkles, which can be used as discriminative features. This paper proposes a finger identification method based on displacement vector to effectively process some variation appeared in contactless hand image. At first, the proposed method produces displacement vectors, which are made by connecting corresponding points acquired by matching each pair of local block. It then recognize finger by measuring the similarity among all the detected displacement vectors. The experimental results using pubic CASIA hand image database show that the proposed method may be effectively applied to personal identification.

• 드라이브 ㆍ 컨트롤
• /
• 제11권4호
• /
• pp.15-24
• /
• 2014

It is difficult to analytically derive a volumetric displacement formula for a gerotor hydraulic motor due to the complexity of the geometric shape of its gear lobes. This work proposes an analytical method for the volumetric displacement, a relatively easy method based upon two physical concepts: conservation between hydraulic energy and mechanical shaft energy, and torque equilibrium for the rotor's motion. The first research using these concepts was conducted on inner and outer rotors rotating with respect to each rotor axis. This work represents the second report conducted on an inner rotor revolving as a planetary motion on the stationary outer rotor. The formula equations regarding the volumetric displacement and flow rate are derived, and the proposed formula about the volumetric displacement is proven to be the same as another analytical displacement formula: the so-called vane length method. From the formula, volumetric displacement is calculated for an example geometry of the gear lobes. The resultant displacement is confirmed to be the same as the value calculated from the chamber volume method. The proposed analytical formula can be utilized in the analysis and design of gerotor hydraulic motors. Because it is based on torque equilibrium, this formula can provide a better understanding of torque performance, such as torque ripple, in designing a gerotor type motor.

• 한국안전학회지
• /
• 제34권1호
• /
• pp.40-44
• /
• 2019

Experimental studies have been carried out to investigate characteristics of gas explosion using a multi layered water gel barrier in a vented explosion chamber. The chamber is consisted of 1600 mm in length, with a square cross-section of $100{\times}100mm^2$. The gel concentration of inner layer of MLWGB ranged from 10% to 90% with intervals of 10% by weight of gel. Displacement of the MLWGB was photographed with a measured using a high-speed video camera, and pressure development was measured using a data acquisition system. It was found that MLWGBs with 10 ~ 20% inner layer concentrations were ruptured during the explosions. As the concentrations of inner layer increased from 30% to 90%, the barriers were not ruptured. As the gel concentrations of the inner layer increased, the displacement increased toward the chamber exit and the pressure decreased for the ruptured barriers. It was found that the pressure attenuation obtained from the MLWGB was higher than that of the single water gel barrier. For the cases of non-ruptured barriers, the pressure inside the chamber less increased with increasing gel concentrations of the inner layer. It was also found that the displacement moved back into the chamber for non-ruptured MLWGBs, and it was sensitive to the gel concentrations.

• 한국정밀공학회지
• /
• 제24권9호
• /
• pp.110-118
• /
• 2007

ISB (Inner structured and bonded) panel with a pyramidal inner structure is actively developing to reduce the weight and to improve the crashworthiness of the material. The objective of this paper is to investigate into the variation of impact characteristics of ISB panels with a pyramidal inner structure according to joining types between skin sheets and inner structures. Several drop impact tests have been performed. In order to examine the impact characteristics at a drawing condition, drawing type of experimental set-up has been proposed. From the results of the experiments, the influence of joining types between skin sheets and the inner structures on the characteristics of the deformation, the energy absorption and the failure has been quantitatively examined. In addition, it has been shown that maximum load decreased and the maximum displacement increases as the joining type changes from the bonding to the welding. The results of the observation of the specimen have been shown that major wrinkles form in the minor crimping direction irrespective of the joining types. Through the comparison of the experimental results for bonding and welding specimens, it has been shown that the absorption energy of the bonded specimen is nearly 1.3-1.5 times of the welded specimen at the same displacement.

• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.139-151
• /
• 2003

This study was to evaluate and to compare the compressive strength and the displacement effecting the abutment or the residual ridge which are transformed by the angle and the heights of the konus denture inner crown when restorating the unilateral konus denture by using the mandibular canine and the 1st premolar as an abutment. The author made 9 different models for different inner crown heights and konus angles. The inner crown height were divided to 5mm, 6mm, and 7mm and konus angles was divided to $4^{\circ}$, $6^{\circ}$, and $8^{\circ}$. And then in each model, 5kg of $15^{\circ}$ mesial load was stressed on the central fossa of the 1st premolar and the 1st molar. The stresses and displacement were measured using the finite element analysis. The results were as follows 1. The maximum compressive strength was shown on the connective area of the abutment and the denture base. 2. As the angle of the inner crown becomes increased, the compressive strength was shown smaller. 3. As the height of the inner crown becomes increased, the maximum compressive strength was shown smaller while the compressive strength of the root apex and the residual ridge showed larger. 4. When the stress was loaded only on the 1st premolar, the more compressive strength was concentrated on the root apex area of the 1st premolar. 5. When the stress was loaded only on the 1st premolar, the compressive strength was concentrated uniformly on the abutment and the residual ridge. 6. When the stress was loaded only on the 1st molar, the maximum displacement was shown on the distal part of the residual ridge.

• 한국가스학회지
• /
• 제20권3호
• /
• pp.73-77
• /
• 2016

본 연구에서는 여러 가지의 절단면 형상을 구비한 중공축이 동등한 최적을 갖는 경우에 대한 변위거동 안전성을 유한요소법으로 해석하였다. FEM 해석결과에 의하면, 외측튜브, 중간튜브, 내측튜브와 이들 튜브 사이를 연결하기 위해 X-타입 또는 Y-타입의 칼럼을 설치하였을 때 중공축 길이의 중간부에서 발생하는 최대 변위량을 줄여주는 것으로 나타났다. 특히, 하중을 지지하기 위해 구비된 X-타입 또는 Y-타입의 칼럼을 위상차 없이 외측튜브와 내측튜브를 중심축을 향해 직접 연결하면 중공축의 변위량을 줄이는 효과가 있는 것으로 나타났다. 그리고 동등한 체적을 갖는 중공축에서 발생하는 수직 변위량을 줄여주고, 변위거동 안전성을 높이기 위해서는 하중을 지지하기 위한 칼럼의 두께를 두껍게 설계하는 것이 바람직함을 알 수 있다.

• 한국전기전자재료학회논문지
• /
• 제18권12호
• /
• pp.1124-1128
• /
• 2005

New piezoelectric actuator design, which can reduce the number of the stacking layer without lowering the piezoelectric displacement, is suggested in this work. Each layer of the new designed multilayer actuator has the same electrode pattern as the cross-sectioned layer of the existing multilayer actuator has. The piezoelectric displacement was calculated by Finite-Element Method (FEM) analysis. The maximum piezoelectric displacement of the new-designed actuator with 13 layers was calculated to be almost same value (55.9 ${\mu}m$) as that of the existing actuator with 25 layers(60.1 ${\mu}m$).

• 한국가스학회지
• /
• 제14권5호
• /
• pp.13-18
• /
• 2010

본 연구는 9% 니켈강재식 LNG 저장탱크용 통합제어안전관리시스템을 개발하고자 한다. 새로운 통합제어안전관리 시스템은 기존의 측정 및 제어시스템에 비해 압력, 변위, 하중을 측정할 수 있는 장치를 추가하였다. 또한, 측정된 데이터는 새로운 제어장치와 안전관리 시스템에 의해 통합되고 분석하는 프로세스를 동시적으로 진행하는 것이다. 초대형 완전밀폐식 LNG 저장탱크의 안전성과 효율성을 증가시키기 위해 통합제어안전관리시스템은 압력계이지를 추가하고, 내부탱크의 외측벽과 스티프너, 톱거더의 용접지역, 코너 프로텍션 탱크의 외측벽에 새로운 변위센서/압력센서를 설치하였다. 변위센서와 하중센서는 내부탱크와 코너 프로텍션 탱크의 9% 니켈강재 구조물에 대한 파손징후를 제공할 수 있고, 내부탱크로부터 누설되는 LNG를 감시할 수 있다. 기존의 누설센서는 내부탱크와 코너 프로텍션 사이의 단열지역에 설치한 누설감지기에 의해 경고신호가 접수될 때까지도 9% 니켈강재 탱크의 파괴에 대한 적절한 정보를 제공하지 못한다는데 문제가 있다. 따라서, 새로운 통합제어안전관리시스템은 온도, 압력, 변위, 하중, LNG의 밀도 데이터를 수집하고 분석하기 위한 것으로, 탱크시스템의 안전성과 내부탱크의 누설을 제어하기 위한 시스템이다. 또한, 디지털 데이터는 9% 니켈강재로 제작한 탱크의 안전성에 관련된 변위와 하중, LNG의 액위와 밀도, 쿨다운 공정, 누설, 압력 등을 제어하기 위해 측정한다.