• Journal of Mechanical Science and Technology
• /
• 제16권6호
• /
• pp.757-761
• /
• 2002

When a layer of cylindrical composite component containing an axisymmetric residual stress state is removed from the inner or outer surface, the dimension of the remaining material changes to balance internal forces. Therefore, in order to machine cylindrical composite components within tolerances, it is important to know dimensional changes caused by residual stress redistribution in the body. In this study, analytical solutions for dimensional changes and the redistribution of residual stresses due to the layer removal from a residually stressed cylindrically orthotropic cylinder were developed. The cylinder was assumed to have axisymmetric radial, tangential and axial residual stresses. The result of this study is useful in cases where the initial residual stress distribution in the component has been measured by a non-destructive technique such as neutron diffraction with no information on the effect of layer removal operation on the dimensional changes.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2004년도 춘계 학술발표회 논문집 제1권1호(통권1호)
• /
• pp.222-229
• /
• 2004

This study purports to analyze equally stressed surfaces in tension-membrane structures through a geometrically nonlinear approach. It adopts the formulation of a 4-node quadrilateral isoparametric plane stress element considering the orthotropic characteristic of membrane textures. Tension structures, which include cables and tension membranes, such as a cable dome initially exhibit unstable conditions because no initial internal stiffness such as bending stiffness is present. Such a structural system requires prestressing to the tension members to attain a stable state. A tension-membrane structure retains a stable three dimensional curved surface as a structural shape. This analytical process for finding the geometry is referred to as Shape Finding Analysis. In order to assess the validity of this study, we examine equally stressed surfaces of saddle and catenary shape shell structures and carry out pertinent stress analyses

• 음성과학
• /
• 제2권
• /
• pp.135-147
• /
• 1997

This thesis describes pronunciation differences of vowel lengths between Koreans and Americans speaking English words and sentences. This study also analizes the reasons for these differences with the help of acoustic instruments. Sixteen sentences and eight words were selected as the experimental material. The informants for this study were 9 males; 3 Americans and 6 Koreans, who were asked to pronounce the test words and sentences five times. In this study, the acoustical analysis to measure duration was done through computer digital techniques. According to the results of the experiment, duration of 8 English vowels pronounced between Koreans and Americans shows very different features. When Koreans pronounce English vowels, the duration of the stressed vowel in the sentence-final position is much shorter than in other positions, such as in the sentence-initial and in word position. On the contrary, when Americans pronounce English vowels, the duration of the stressed vowel in the sentence-final position is much longer than in other positions. If the correlation between length and stress were to be studied in a more detailed manner, it would give fundamental help to the study of relation between stress and length.

• 한국작물학회지
• /
• 제44권3호
• /
• pp.282-287
• /
• 1999

The object of this study was to determine the difference of the time course changes of transpiration, diffusion resistance and photosynthetic rate of rice at several different growth stages subjected to soil moisture stress (SMS) and recovery by irrigation. A japonica rice cultivar 'Dongjinbyeo', was grown under flooded condition in a plastic container filled with silty loam soil. At 5 main growth stages, the container was treated by SMS until initial wilting point (IWP) and then reirrigated. The duration of SMS until IWP were the longest, 13 days for tillering stage, and the shortest, 7 days for panicle initiation and meiosis stage. The transpiration rate rapidly decreased during SMS and the transpiration rate at IWP of the stressed plant showed 10∼20% compared with control, and the transpiration rate of stressed plant at most growth stages also recovered rapidly after irrigation and then reached 100% of control within a week. The shoot photosynthetic rate in all growth stages rapidly decreased by SMS, and the rates at IWP of stressed plants were de-creased nearly to 0%, beside the treatment at tillering stage. The recovery degree of photosynthetic rate by irrigation ranged from 20 to 90%, showed higher at early growth stages of SMS treatment than that of later stages. At all growth stages the leaf diffusion resistance of stressed plants was over 3 times that of the control resulting from a rapid increase at 3 to 5 days after draining for SMS, and showed quick recovery by irrigation within 3 days after drainage. The above physiological parameters changed in close relation with the decrease of the soil matric potential after SMS. These results indicate that at all main growth stages of rice plants the transpiration and photosynthesis reduction by stomatal closure reponded sensitively to the first stage of SMS closely related with decrease of soil water potential, while those recovery pattern and recovered degree by irrigation are little different by growth stage of rice.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2000년도 하계학술발표대회 논문집 제19권 1호
• /
• pp.325-328
• /
• 2000

According to H.B.Lee(1993), standard Korean vowel qualities are as follows: in /i/, /e/, $/\epsilon/$, /a/, /o/, /w/, they have 4 qualities each other and in /er/ there are 3 qualities. The environments of 4 qualities are iong and stressed vowel in word initial, short and stressed vowel in word initial, unstressed vowel in word initial, unstressed vowel in word finial. The aim of this study is to seek and compare with H.B.Lee(1993). Conclusively I could not find on the whole any pattern of the same types of H.B.Lee(1993) in this study And especially in Fl vowel formant values of /er/and /w/, I never found any pattern of the same types of H.B.Lee(1993). Also F2 vowel formant values of $/\varepsilon/$ and /w/ do not have any kind of pattern of the same types of H.B.Lee(1993), between them, the patternize of F2 vowel formant values in /w / is especially difficult. It is the same story of Jaekang Lee(1998). But in some case, the patternize could be done. among the whole vowels, analysis environment b has the wide width on the change of the formant value. As the another result of the analysis It is to possible to make the pattern of the old male group. The old male group on the whole is analyzed to have the most low formant values and the old women group is analyzed to have the most high formants values, but in the most high formant valus there are young women group. And the formant values's rising in 2 cases of the formant value of /er/ is analyzed to have the same pattern of H.B.Lee(1993).

• Smart Structures and Systems
• /
• 제18권5호
• /
• pp.911-930
• /
• 2016

The main purpose of this paper is to study the effects of initial stress, gravity, anisotropy and porosity on the propagation of shear wave (SH-waves) in a fiber-reinforced layer placed over a porous media. The frequency equations in a closed form have been derived for SH-waves by applying suitable boundary conditions. The frequency equations have been expanded and approximated up to $2^{nd}$ order of Whittaker's function. It has been observed that the SH-wave velocity decreases as width of fiber-reinforced layer increases. However, with the increase of initial stress, gravity parameter and porosity, the phase velocity increases. The results obtained are in perfect agreement with the standard results investigated by other relevant researchers.

• Earthquakes and Structures
• /
• 제9권3호
• /
• pp.577-601
• /
• 2015

The thermomagnetic effect on plane wave propagation at the liquid-solid interface with nonclassical thermoelasticity is investigated. It is assumed that liquid-solid half-space is under initial stress. Numerical computations are performed for the developed amplitude ratios of P, SV and thermal waves under Cattaneo-Lord-Shulman theory, Green-Lindsay theory and classical thermoelasticity. The system of developed equations is solved by the application of the MATLAB software at different angles of incidence for Green and Lindsay model. The effect of initial stress and magnetic field in the lower half-space are discussed and comparison is made in LS, GL and CT models of thermoelasticity. In the absence of magnetic field, the obtained results are in agreement with the same results obtained by the relevant authors. This study would be useful for magneto-thermoelastic acoustic device field.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.315-321
• /
• 1996

The structural topology optimization presented in this paper is based on an evolutionary procedure, developed by Xie and Steven, in which the low stressed material of a structure is removed from the structure step-by-step until an optimal design is obtained. By appling this procedure a layout or topology of a structure can be found from a initial block of material. The purpose of this paper is to implement the evolutionary procedure, introduce some novel features and investigate its feasibility by studying a few examples.

• 한국자동차공학회논문집
• /
• 제22권4호
• /
• pp.145-151
• /
• 2014

Modern vehicle has a lot of ECU(Electronic Control Unit) products to control many parts such as engine, transmission, brake, body and so on. ECU quality is one of important factors related to vehicle quality and driver's safety. Based on Bath-tub curve which presents failure rate during product lifetime, we designed and applied Accelerated Run-in Test into manufacturing line by simulating stress amount to ECU and developing the required software and efficient test equipment for mass production. This test makes ECU products stressed through electrical and thermal stresses under excessive driving condition, which induce potential initial failure of components in the ECU during production. The outcome until these days proved that Acceleration Run-in Test have reduced initial failure rates and increased quality of ECU products in the field outstandingly.

• 영어영문학
• /
• 제56권5호
• /
• pp.851-870
• /
• 2010

The purpose of this paper is to investigate the distribution of /ju/ in British English, especially after the coronal sonorants /n, l, /r/. The sequence /ju/ is related with vowels such as /u/, /ʊ/, and /ʊ/, and has occasioned a variety of conflicting analyses or suggestions. One of those is in which context /j/ is deleted if we suppose that the underlying form is /ju/. The context differs according to the dialect we deal with. In British English, it is known that /j/ is deleted always after /r/, and usually after /l/ when it occurs in an unstressed word-medial syllable. To check this well-known fact I searched OED Online (the 2nd Edition, 1989) for those words which contain /n, l, r/ + /ju, jʊ, u, ʊ, (j)u, (j)ʊ/ in their pronunciations, using the search engine provided by OED Online. After removing some unnecessary words, I classified the collected words into several groups according to the preceding sonorant consonants, the positions, and the presence (or absence) of the stress, of the syllable where /ju/ occurs. The results are as follows: 1) the deletion of /j/ depends on the sonorant consonant which /ju/ follows, the position where it occurs, and the presence of the stress which /ju/ bears; 2) though the influence of the sonorant consonants is strong, the position and stress also have non-trivial effect on the deletion of /j/, that is, the word-initial syllable and the stressed syllable prefer the deletion of /j/, and word-medial and unstressed syllable usually retain /j/; 3) the stress and position factors play their own roles even in the context where the effect of /n, l, r/ is dominant.