• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.113-120
• /
• 2002

The effect of out-of-plane loads on the fatigue strength of welded steel structures is examined through fatigue tests with weldment of two fillet weld joint types. The results of the fatigue tests are compared with those under axial loads, on the basis of the hot spot stress range at the weld toe. From the result of the comparison, a method on how to incorporate the effect of the out-of-plane bending stress is proposed using design S-N curves derived from fatigue tests under the axial load. The proposed method is useful for rational assessment of the fatigue strength of fillet-welded structures, where combined stresses of the in-plane axial stress and the out-of-plane bending stress are induced simultaneously due to the complexity of applied loads and structural geometry.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.517-526
• /
• 2004

In the resent years, the early evaluation of concrete quality, construction and maintenance has been considered as all is of major concern due to the increase of loading and the degradation of structures related with time. This paper presents evaluation of structural safety performance using measured data of construction, on the basis of a field measurements for the prevention of unreliable concrete works. Measurements analyzed in this paper are early quality condition and performance assessment, serviceability performance by cracks and deflection, rating performance by loading, durability performance by chloride attack and carbonation. Thus, a quantitative assessment model of resistance capacity was developed here to meet the requirement for deteriorated concrete structures. The model focuses on damage mechanical of concrete structures deteriorated by initial damage factors for concrete quality and environment factors such as chloride and carbonation attacks. These results could provide useful information for concrete structures interested in design, construction and maintenance.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2001.02a
• /
• pp.98-101
• /
• 2001

This work presents racetrack High Temperature Superconducting (HTS) magnet with iron plates to achieve the maximum current-carrying capacity and the simple shape that can easily be wound and jointed. The shape, position and kinds of iron plates are chosen by using 3 Dimensional Finite Element Analysis (3d FEA) considering magnetic saturation of iron plates. The racetrack HTS magnet with iron plates, magnet having optimized current distribution and initial magnet are compared with each other through 3D FEA, manufacturing and testing these magnets. The measured performance of the magnet with iron plates improved by 50% on the basis of initial magnet.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.449-450
• /
• 2009

In this study, the characteristics of initial shear strength of hollow sectional columns were investigated by experiments with parameters of the aspect ratios, void ratios, web area ratios and load patterns. The test results were analyzed with comparison of the values expected by the empirical equations. The empirical equation was newly proposed on the basis of mechanical characteristics and test results, and its validity was evaluated.

• 전기의세계
• /
• v.28 no.11
• /
• pp.45-51
• /
• 1979

Finte element methods are developed for the initial distribution problems which contain the surge potential circuits of high voltage transformer windings. The initial distribution of surge voltages in transformer windings are useful to the work to a practical engineering basis. However, the conventional methods of analyzing them so far are much complicated for practical designs. In this paper, the ability to solve surge potential field problems underlies the development of descreting methods to a lodal capacitive distribution-coefficients for determing the surge voltage relationship among a set of transformer coils. A practical example-the modeling of an antioscillation shield coil winding and hisercap winding is used to illustrate and evaluate these methods.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.1190-1197
• /
• 2009

Design parameters related to Yano's method(1984, 1985), one of experimental approaches having been used widely in Korea to estimate sedimentation and consolidation of dredged and reclaimed ground, were analyzed and their propriety were reassessed in this paper. Data analyses were performed on the basis of the settling test results using samples from the west coastal area of Korea. From analysis of results, for specific characteristics of these dredged and reclaimed marine soft clays, co-relations of initial water content - coefficient of sedimentation/ consolidation - initial setting velocity were evaluated. Relation between height of soil solid and surface height of slurry at the stages of initiation and termination of consolidation was also assessed. Finally ranges and average values of these design parameters were evaluated and typical empirical equations between these design parameters were also proposed.

• Phonetics and Speech Sciences
• /
• v.4 no.2
• /
• pp.51-59
• /
• 2012

The purpose of this study is to examine the pitch pattern of Korean accentual phrases produced by Chinese Korean-learners in the reading of a Korean text. Korean accentual phrase is determined by a specific F0 contour. And the pitch contour of APs differ depending on their length and the nature of initial segment. In order to examine if Chinese speakers are also aware such a phonetic properties, we have examined the AP pitch contours produced by 15 Chinese speakers differing in proficiency, and compared them to pitch contours produced by six Korean native speakers. The results show that Chinese speakers' pitch errors were observed in initial segment-tone interaction and in type of pitch patterns. However, even though Chines speakers produced the same type of pitch patterns, internal tonal modulation differs from native speakers. Finally, on the basis of theses results, we proposed a teaching method that visualizes the F0 contour.

• Child Studies in Asia-Pacific Contexts
• /
• v.2 no.1
• /
• pp.29-43
• /
• 2012

The purpose of the study was to generate the candidate items for the Adolescent Friendship Social Capital Scale. Both inductive and deductive approaches were used to generate the scale items. Halpern's conceptual map of social capital served as the theoretical basis of this scale, and guided the development of items. Semi-structured interviews with adolescents in Sydney, Melbourne and Beijing generated the initial pool of scale items. Twenty-six items were generated for the Adolescent Friendship Social Capital Scale. The items are organised in four theoretical constructs: Bonding Networks, Bridging Norms, Bridging Sanctions, and Linking Networks. Each item is a short statement followed by a five-point Likert scale anchored by 1= "Strongly disagree" and 5= "Strongly agree". The scale has several advantages over previous measures of adolescent friendship networks and friendship social capital. The scale has a strong and clear theoretical structure, the scale items demonstrate initial construct and content validity, and the format of the scale enables the collection of continuous data. However, in order to ensure the validity and reliability of the scale, another two stages of research need to be conducted in the future: scale development and scale evaluation.

• Fire Protection Technology
• /
• s.29
• /
• pp.39-45
• /
• 2000

All objects emit thermal radiation and this radiation is the basis of the techniques used to detect flames. The usual phenomena occurring in the initial stage of a fire are generally invisible products of a combustion and visible smoke. Liquid or gaseous materials do not undergo a smoldering stage such fires develop very rapidly. Also, the heat generated by the initial flames is usually not sufficient to active a heat detector. In this case the most effective criterion for automatic fire detection is the flame. In fire regulation of korea, the compulsory standard provided that a flame detector shall be installed a place of the attachment hight of detector is higher than 20 m, chemical plants, hangar, refinery, etc.. The result of the research and development are discriminated between a flame and other radiant emitters, developed PZT pyroelectric element is based on the use of photo-voltanic cell, developed IR band-pass filter that only allow a 4.3 radiation wavelength to reach the sensors and developed IR flame detector.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.06a
• /
• pp.69-76
• /
• 1999

This paper proposes a new region-oriented coding scheme of still images. The scheme first segments an image into homogeneous regions by making use of Voronoi diagrams. Then luminance components in each Voronoi region are encoded using a transform coding technique which employs the Schmidt's orthogonalization method to produce orthonormal basis-functions for arbitrarily shaped regions. In this technique, coding efficiency depends on the properties of initial vectors to be orthogonalized. Therefore we adaptively select a set of initial vectors as well as the order in which these vectors are orthogonalized. Simulation results indicate that the proposed coding scheme achieves higher coding performance with much less computation than the KLT-based scheme which we reported formerly.