• Journal of Animal Science and Technology
• /
• 제55권4호
• /
• pp.263-272
• /
• 2013

This experiment was conducted to investigate the effects of soybean meal (SBM) of different origin (Korea, India or Brazil) on performance, fecal microflora and economics of grower pigs. A total of 144 grower pigs (initial BW, 10.4 kg) were randomly allotted to six treatments on the basis of BW. Pig's diets containing SBM were formulated based on the total amino acid (TAA) or true ileal digestible amino acid (TIDAA) levels. Pigs fed domestic SBM diets had greater (p<0.05) overall ADG, ADFI and final body weight and apparent total tract digestibility (ATTD) of DM, GE and CP (phases I, II and III) than those fed diets containing SBM originated from India or Brazil. Moreover, greater (p<0.05) ADG, ADFI, feed /gain (F/G), and ATTD of DM, GE and CP were observed in response to diets formulated on a TIDDA basis when compared with those formulated on a TAA basis. The fecal microflora was not affected (p>0.05) by dietary treatments. The overall feed cost per kg body weight gain was less (p<0.05) for diets formulated using domestic SBM than for those containing SBM from India, while the feed cost per kg body weight gain was less (p<0.05) for diets formulated prepared on a TIDAA than a TAA basis. These results indicate that domestic SBM has better quality than SBM imported from Brazil or India and better performance was obtained when diets were formulated based on the true ileal digestible amino acid (TIDAA) content.

• 한국가금학회지
• /
• 제40권2호
• /
• pp.129-138
• /
• 2013

An experiment was conducted to determine the effects of origins of soybean meal (SBM) on growth performance, nutrients and energy retention and fecal microflora in broilers. The SBM originating from Korea, Brazil and India were used. A total of 480 broiler chicks (average initial BW, 41.8 g) were randomly allotted to 6 treatments. Each treatment had 4 replicate pens with 20 chicks per pen. Birds were fed diets containing SBM originated from Korea (domestic SBM), Brazil or India (imported SBM) and the diets were based on the total amino acid (TAA) or true digestible amino acid (TDAA). Experimental diets were fed in two phases, starter (d 0~21) and finisher (d 22~35). The overall weight gain, feed intake and FCR were better (P<0.05) in birds fed Korean SBM. During starter and finisher periods, birds fed diets containing Korean SBM had greater (P<0.05) retention of GE, DM, and CP (P<0.05) as compared with Birds fed diets containing SBM from India. In addition, diets formulated on TDAA basis had grater (P<0.05) CP retention during starter period and DM, GE and CP retention during finisher period. There were no differences (P>0.05) in the excreta microflora and overall feed cost per kg body weight gain in birds fed SBM from different origins; however, diets formulated on TDAA basis had lesser (P<0.05) feed cost per kg body weight gain in birds when compared with diets formulated on TAA basis. These results indicate that Korean SBM has better nutrients digestibility than SMB originated from Brazil and India, which contributes to the improved performance of broilers. In addition, better performance was obtained when diets were formulated on TIDAA basis.

• 유기물자원화
• /
• 제10권1호
• /
• pp.120-127
• /
• 2002

본 연구는 디젤의 오염기간 및 토성이 콤포스팅 처리효율에 미치는 영향을 살펴보고자 실시하였다. 실험에 사용된 토양은 실트질양토이었으며, 디젤의 초기농도는 2,000, 4,000, 그리고 10,000mg/kg으로 오염시켰다. 토양에 습윤질량비로 하수슬러지 탈수케이크를 1:0.3으로 첨가하였으며, 온도는 $20^{\circ}C$로 유지하였다. 30일 콤포스팅 운전 후 TPH의 휘발량은 오염농도에 관계없이 초기오염농도의 0.7-3.5%의 범위를 나타내었다. 약 2,000과 10,000mg TPH/kg의 오염농도에서 각각 약 86%와 94%정도가 생물학적인 요인에 의하여 분해가 되었다. 노르말알칸류는 TPH 보다 분해율이 더 높았다. 노르말알칸류의 개별화합물들 중에서는 C12-C14의 성분들이 다른 노르말알칸류의 성분들보다 많은 휘발을 나타내었다. 1차분해반응속도상수 k를 비교하여 보면 초기농도가 약 2,000, 4,000, 그리고 10,000mg TPH/kg일 경우에 각각 0.079, 0.069, 그리고 0.061/day이었다. 콤포스팅 운전 동안 발생된 이산화탄소의 총누적량과 TPH의 총분해량은 초기농도에 관계없이 높은 상관성을 가지고 있었다(r = 0.97-0.99).

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.387-390
• /
• 2008

The importance of the life cycle cost analysis for construction projects of bridge has been recognized over the last decades. Accordingly, theoretical models, guidelines, and supporting softwares have been developed for the life cycle cost analysis of bridges. However, it is difficult to predict life cycle cost considering uncertainties precisely. This paper presents methodology for optimal design of substructure for a steel box bridge. Total life cycle cost for the service life is calculated as sum of initial cost, damage cost considering uncertainty, maintenance cost, repair and rehabilitation cost. The optimization method is applied to design of a bridge substructure with minimal cost, in which the objective function is set to life cycle cost and constraints are formulated on the basis of Korean Bridge Design Specification. Initial cost is calculated based on standard costs of the Korea Construction Price Index and damage cost on the damage probabilities to consider the uncertainty of load and resistance. An advanced first-order second moment method is used as a practical tool for reliability analysis using damage probability. Maintenance cost and cycle is determined by a stochastic method and user cost includes traffic operation costs and time delay costs.

• 한국미생물·생명공학회지
• /
• 제36권3호
• /
• pp.233-239
• /
• 2008

A new approach to the solubilization of excess activated sludge by the inoculation of lactic acid bacteria was studied to reduce the amount of sludge produced in the activated sludge treatment process. Aerobic microorganism in sludge was lysed in anaerobic condition and the cytoplasmic substance eluted was utilized as a carbon source by lactic acid bacteria. On the basis of sludge solubilization efficiency, Lactobacillus brevis and Leuconostoc mesenteroides subsp mesenteroides were selected the best candidates among five kinds of Lactobacillus sp. and seven kinds of Leuconostoc sp. The sludge solubilization efficiency by heterofermentative lactic acid bacteria was more efficient than that of homofermentative bacteria. Initial value of soluble COD (sCOD) was 1050 mg/L at the initial inoculation time increased to 3070 mg/L (192% solubilization) at 96 h of the incubation time. The inoculation of lactobacillus brevis to the sludge resulted in 2824% increase in sCOD value after 96 h of incubation than the control experiment. Leuconostoc mesenteroides subsp mesenteroides showed 152% increase of solubilization and 30% increase of S-COD/T-COD on 96 h of incubation time. Considering the increase of S-COD by the inoculation of Leuconostoc sp. on 24 h, 10% inoculation of lactic acid bacteria to the sludge was most effective.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.1933-1943
• /
• 2001

A micromechanical model is presented for superplasticity in which heterogeneous microstructures are coupled with deformation behavior. The effects of initial distributions of grain size, and their evolutions on the mechanical properties can be predicted by the model. Alternative stress rate models such as Jaumann rate and rotation incremental rate have been employed to analyze uniaxial loading and simple shear problems and the appropriate modeling was studied on the basis of hypoelasticity and elasto-viscoplasticity. The model has been implemented into finite element software so that full process simulation can be carried out. Tests have been conducted on Ti-6Al-4V alloy and the microstructural features such as grain size, distributions of grain size, and volume fraction of each phase were examined for the materials that were tested at different strain rates. The experimentally observed stress-strain behavior on a range of initial grain size distributions has been shown to be correctly predicted. In addition, the effect of volume fraction of the phases and concurrent grain growth were analyzed. The dependence of failure strain on strain rate has been explained in terms of the change in mechanism of grain growth that occurs with changing strain rate.

• 한국의학물리학회지:의학물리
• /
• 제18권3호
• /
• pp.161-166
• /
• 2007

공모양의 단단한 종양안에서 수동조준된 약물의 전달에 관한 모델이론이 적절한 경계조건과 초기조건하에서 픽의 확산법칙으로부터 유도된다. 종양안의 농도는 초기값이 일정하면 시간과 지름의 함수로 나타난다. 생각실험(사고실험)으로부터 예측되는 바와 같이, 농도는 시간이 경과함에 따라 평형값에 접근한다. 시간에 따른 농도의 변화는 조직안의 약물의 확산계수, 종양의 크기, 주입된 약물의 양, 경계면에서의 농도의 물매(gradient)에 의해 결정된다.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2001년도 The Pacific Aisan Confrence On Intelligent Systems 2001
• /
• pp.151-155
• /
• 2001

Mobile agent technology has been the subject of much attention in the last few years, mainly due to the proliferation of distributed software technologies combined with the distributed AI research field. In this paper, we present a design of communication networks of agents that cooperate with each other for forwarding messages to the specific mobile agent in order to make the overall system location transparent. In order to make the material accessible to general intelligent system researchers, we present the general ideas abstractly in terms of the graph theory. In particular, a proxy network is defined as a directed acyclic graph satisfying some structural conditions. In turns out that the definition ensures some kind of reliability of the network, in the sense that as long as at most one proxy agent is abnormal, there agent exists a communication path, from every proxy agent to the target agent, without passing through the abnormal proxy. As the basis for the implementation of this scheme, an appropriate initial proxy network is specified and the dynamic nature of the network is represented by a set of graph transformation rules. It is shown that those rules are sound, in the sense that all graphs created from the initial proxy network by zero or more applications of the rules are guaranteed to be proxy networks. Finally, we will discuss some implementation issues.

• 소성∙가공
• /
• 제19권8호
• /
• pp.508-516
• /
• 2010

Thickening process in sheet metal forming is being increased to improve the strength as well as to reduce manufacturing process such as welding. This process can make it possible to obtain part locally thicker than that of initial sheet thickness. In this study, design method for manufacturing the component which has double sinks with local thickened wall is proposed. Deep drawing and upsetting processes are applied in order to form double sinks and thicken its walls. Used material is SPHC440 with the thickness of 2.0mm and initial blank size is determined on the basis of the final product. Distance between the center of double sinks and first drawing ratio to avoid fracture are the most significant factors during deep drawing. FE-analysis is implemented in order to determine the appropriate values. Progressive die is designed based on the proposed method and FE-analysis. As a result of experiment, locally thickened component can be manufactured, which has double sinks with the thickness about 3mm at the corner and wall.

• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 2000년도 춘계 공동학술발표회
• /
• pp.110-110
• /
• 2000

Temporal and spatial distribution patterns of the magmatic rocks and associated ore deposits in the Mesozoic magmatic - metallogenic belt along the Yangtz River, Anhui Province are used to determine and discuss the crust - mantle interaction processes. The magmatic rocks are Cu - Au mineralized high - K calc - alkalic intermediate ¬acidic (CAK) and Fe - Cu mineralized high - Na alkalic - calc intermediate - basic intrusive rocks (FCN) in the central part of the belt and grade to Cu - Mo - Pb - Zn - Ag mineralized calc - alkalic granitoids (CMG) and A - type granites (AG) in the southern and northern parts of the belt. Samples from the CAK and CMG yield Rb - Sr isochron ages of 137 - 140Ma with $(^{87}Sr/^{86}Sr)_{o}$ = 0.7060 - 0.7101, while those from the FCN and AG yield the ages of 120 - 129Ma with $(^{87}Sr/^{86}Sr)_{o}$ = 0.7047 - 0.7077. The Sr isotope ratios, CriTh ratios 0.4 - 3.1), Eu/Eu* ratios < 0.79 - 1.05) and initial epsilon (Nd) values (-16.6 - -6.3) for the CAK and CMG are consistent with magma derivation from old metamorphic basement rocks rich in metallogenic elements through a two - stage process of mantle - derived magma underplating caused by primary lithosphere extension and subsequent partial melting. On the basis of Sr isotope data, CriTh ratios (3.4 - 13.8), Eu/Eu* ratios (0.86 - 1.13) and initial epsilon (Nd) values (-7.7 - +1.4), the FCN and AG are considered to be formed through syntexis with material input from the mantle that resulted from further lithosphere extension followed by mantle - derived magma underplating on a large scale.