• Nuclear Engineering and Technology
• /
• v.49 no.5
• /
• pp.920-927
• /
• 2017

With ever-advancing computer technology, the Monte Carlo (MC) neutron transport calculation is expanding its application area to nuclear reactor transient analysis. Dynamic MC (DMC) neutron tracking for transient analysis requires efficient algorithms for delayed neutron generation, neutron population control, and initial condition modeling. In this paper, a new MC steady-state simulation method based on time-dependent MC neutron tracking is proposed for steady-state initial condition modeling; during this process, prompt neutron sources and delayed neutron precursors for the DMC transient simulation can easily be sampled. The DMC method, including the proposed time-dependent DMC steady-state simulation method, has been implemented in McCARD and applied for two-dimensional core kinetics problems in the time-dependent neutron transport benchmark C5G7-TD. The McCARD DMC calculation results show good agreement with results of a deterministic transport analysis code, nTRACER.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.6
• /
• pp.732-750
• /
• 2019

Air drying was carried out on 15 Korean red pine logs to provide a prediction model of the moisture content (MC) change in the wood during drying. The final MC was 17.4% after 880 days since the beginning of air drying in the summer for 6 Korean red pine logs with 68.7% initial MC. The final MC was 16.0% after 760 days since the beginning of air drying in the winter for 9 Korean red pine logs with 35.8% initial MC. A regression model with R-squared of 0.925 was obtained as a result of multiple regression analyses with initial MC, top diameter, temperature, relative humidity, and wind speed as independent variable and and MC change during air drying as dependent variable. The initial MC and top diameter, which is the characteristic of Korean red pine, have greater effect on the MC decrease during air drying compared to meteorological factors such as the temperature, relative humidity, and wind speed. Two-dimensional mass transfer analysis was performed to predict the MC distribution of Korean red pine logs during air drying. Two prediction models with different air drying days and different meteorological factors for the determination of the diffusion coefficient and surface emission coefficient were presented. The error between the different two methods ranged from 0.1 to 0.8% and the difference from the measured value ranged from 2.2 to 3.6%. By measuring the internal MC during air drying of Korean pine logs with various initial MC and diameter, and calculating the moisture transfer coefficient in wood for each meteorological condition, the error of the prediction model can be reduced.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.3
• /
• pp.27-33
• /
• 1985

Air-drying tests were carried out on green taun (Pometia pinnata f glabra) for 25-mm and 50-mm thickness to elucidate drying characteristics on air-drying rate, time and defects in spring and air-drying calendar. The results of this study were as follows: 1. The air-dried lumber for 25-mm thickness from an initial average moisture content (MC) of $58.3{\pm}3.5$ percent reached 30 percent MC in 17 days, 25 percent MC in 24 days, 20 percent MC in 38 days and 15 percent MC in 84 days. 2. The air-dried lumber for 50-mm thickness from an initial average MC of $59.6{\pm}5.0$ percent reached 30 percent MC in 39 days, 25 percent MC in 55 days and 20 percent MC in 84 days. 3. Air-drying calendar that could be useful in estimating drying times for each month developed by the use of climatological data for Suwon. Total number of effective air-drying days during a year were 243.5 days and the major determinant of the effect air-drying days was temperature. 4. The air-drying rates for 25-mm and 50-mm coated lumber were slight1y slower than those of uncoated lumber. The number and total length of both end checks and surface checks for end coated lumber were less severe than those of uncoated lumber.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.2
• /
• pp.117-125
• /
• 2003

In this paper, we propose a new code acquisition architecture having the features of low complexity and high speed for the MC-CDMA system. The newly designed searching finger has function of the searcher as well as the finger. The searching finger tests the PN code Phase as the searcher during the initial acquisition, and as the finger after the initial acquisition. The proposed system has reduced the average acquisition time of the PN codes to $T_{acq}$/19 in the 20MHz MC-CDMA system with 75% reduction of H/W complexity.y.

• Journal of the Korean Society of Tobacco Science
• /
• v.11 no.2
• /
• pp.241-246
• /
• 1989

Mold development on leaf tobacco(Flue-cured, var. NC 82) during the storage was examined according to the initial moisture content(MC) of the tobacco. The initial moisture content of the leaf tobacco was controlled as 12,14,16% after redrying. Those were packed in cardboard boxes and stored in a warehouse. Samples were taken monthly from June of 1988 through August of 1989 and were evaluated for mold development (colony count) and MC. The moisture content change in the leaf tobacco of 12, 14 and 16% initial MC was in the range of 11.1-13.3, 12.8-15.3 and 14.9-16.7% and the mean number of colonies from them were 1.4$\times$102, 1.0$\times$102, and 4.0$\times$102 colonies per gram of tobacco, respectively, however mold-damaged leaf tobacco other than the treatments was occasionally observed to have the colony number as high as 2.3$\times$105 colonies per gram of tobacco. In the meantime, the leaf tobacco was stored at 6 relative humidity levels at $25^{\circ}C$ in laboratory test. Leaf tobacco of 15.0-16.4% MC was maintained without the mold-damage after 80 days of storage whereas those of 19.9, 21.3, 25.5 and 27.1% MC became moldy after 50, 15, 11 and 6 days of storage, respectively.

• Journal of Radiation Protection and Research
• /
• v.43 no.1
• /
• pp.10-19
• /
• 2018

Background: Monte Carlo (MC) simulation is the most accurate for calculating radiation dose distribution and determining patient dose. In MC simulations of the therapeutic accelerator, the characteristics of the initial electron must be precisely determined in order to achieve accurate simulations. However, It has been computation-, labor-, and time-intensive to predict the beam characteristics through predominantly empirical approach. The aim of this study was to analyze the relationships between electron beam parameters and dose distribution, with the goal of simplifying the MC commissioning process. Materials and Methods: The Varian Clinac 2300 IX machine was modeled with the Geant4 MC-toolkit. The percent depth dose (PDD) and lateral beam profiles were assessed according to initial electron beam parameters of mean energy, radial intensity distribution, and energy distribution. Results and Discussion: The PDD values increased on average by 4.36% when the mean energy increased from 5.6 MeV to 6.4 MeV. The PDD was also increased by 2.77% when the energy spread increased from 0 MeV to 1.019 MeV. In the lateral dose profile, increasing the beam radial width from 0 mm to 4 mm at the full width at half maximum resulted in a dose decrease of 8.42% on the average. The profile also decreased by 4.81% when the mean energy was increased from 5.6 MeV to 6.4 MeV. Of all tested parameters, electron mean energy had the greatest influence on dose distribution. The PDD and profile were calculated using parameters optimized and compared with the golden beam data. The maximum dose difference was assessed as less than 2%. Conclusion: The relationship between the initial electron and treatment beam quality investigated in this study can be used in Monte Carlo commissioning of medical linear accelerator model.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.3
• /
• pp.106-112
• /
• 2004

This paper presents a new heuristic algorithm for the machine cell(MC) formation problem. MC formation problem is represented as an unbalanced k-way network partition and the proposed algorithm uses four stage-approach to solve the problem. Four stages are natural sub-network formation, determination of intial vertexes for each sub-network, determination of initial partition, and improvement of initial partition. Results of experiments show that the suggested algorithm provides near optimal solutions within very short computational time.

• Korean Journal of Agricultural Science
• /
• v.51 no.1
• /
• pp.87-95
• /
• 2024

The objective of this study was to investigate the anti-obesity effects of adding Momordica charantia (MC) and Chrysanthemum zawadskii var. latilobum (CZ) extracts to drinking water on obesity-induced mice. A total of 84 eight-week-old C57BL/6N male mice with an initial body weight (BW) of 28.11 ± 1.39 g were used in this study. All treatments were fed a high-fat diet for d 28. Mice were randomly divided into seven drinking treatments (six replicate each treatment) based on the initial BW. Treatments are as follows: control (CON), normal tap water, MC 1, CON with 1% MC aqueous extract, MC 2, CON with 2% MC aqueous extract, CZ 1, CON with 1% CZ aqueous extract, CZ 2, CON with CZ aqueous extract (2%), MCZ 1, CON with 1% MC aqueous extract and 1% CZ aqueous extract, MCZ 2, CON with 2% MC aqueous extract and 2% CZ aqueous extract. During the entire period, the CZ 1, MCZ 1, and MCZ 2 significantly decreased (p < 0.05) gain to feed than CON. The CON significantly higher (p < 0.05) water intake than other treatments on d 0 to 14. The MCZ 1 significantly decreased (p < 0.05) relative (ratio of absolute organ weight to BW) organ weights, including retroperitoneal white adipose tissue (RWAT) weight and inguinal white adipose tissue (IWAT) weight, compared to CON. In conclusion, our study suggests that there was no significant difference in the anti-obesity effects between MC and CZ, and MCZ 1 has synergistic effects by regulating adipose tissue.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.10
• /
• pp.1034-1038
• /
• 2008

Degradative Solidification/Stabilization(DS/S) is a modification of conventional Solidification/Stabilization(S/S) that incorporates degradative processes for organic contaminant destruction with the low cost of conventional S/S. Inorganic contaminants are immobilized and chlorinated organic contaminants are destroyed by DS/S treatment. In this study, a DS/S using cement/slag/Fe(II) systems as binder was investigated to assess its effectiveness in degrading chloroform(CF) and methylene chloride(MC) contained in hazardous liquid wastes. The initial concentration of CF was 0.26 mM, 1.0 mM, 8.4 mM, 25 mM and 42 mM and Fe(II) was 200 mM. The result showed that degradation of CF in various concentration was in one kind reaction as pseudo-first-order and 95% of 0.26 mM initial concentration of CF was removed in five days. 50 mg/L of heavy metal was added in order to accelerate the rate of degradation of MC and initial concentration of MC was 3.50 mM however, degradation did not occur in system. Thus additional studies needed for degradation of MC and more studies on other reaction pathways products will help elucidate reaction mechanisms and pathways for chlorinated methanes in cement/slag/Fe(II) systems.

• Korean Journal Plant Pathology
• /
• v.11 no.3
• /
• pp.252-257
• /
• 1995

Growth rates of the low temperature growing isolates, Pseudomonas fluorescens M45 and MC07, reached maximum stationary phase within 50 hrs at the low temperature, 4$^{\circ}C$. But an ordinary biocontrol agent P. putida Pf3 did not reach logarithmic growth phase until 80 hrs. The culture filtrates of M45 and MC07 significantly inhibited the mycelial growths of Pythium ultimum, Rhizoctonia solani and Phytophthora capsici. Detached cotyledons of cucumber grown on Murashige and Skoog agar medium were much enhanced in their growth, compared to those without the filtrates. Population densities of M45 and MC07 in the rhizosphere at 14$^{\circ}C$ were more stable than at 27$^{\circ}C$. When M45 and MC07 were treated into soil, the population density of MC07 continuously increased up to 9 days after treatment, and sustained the initial inoculum density up to 60 days. Cucumber damping-offs caused by P. ultimum and R. solani were significantly reduced by applying M45 as seed-inoculant and by soil treatment with MC07. The combined treatment of M45 and MC07 provided greater effect in reducing the disease incidence than that obtained by single treatments.