• Journal of Sensor Science and Technology
• /
• v.33 no.1
• /
• pp.40-47
• /
• 2024

The creation of vertically aligned one-dimensional (1D) nanostructures through the decoration of n-type tin oxide (SnO₂) on p-type chromium oxide (Cr₂O₃) constitutes an effective strategy for enhancing gas sensing performance. These heterostructures are deposited in multiple stages using a glancing angle deposition technique with an electron beam evaporator, resulting in a reduction in the surface porosity of the nanorods as SnO₂ is incorporated. In comparison to Cr₂O₃ films, the bare Cr₂O₃ nanorods exhibits a response 3.3 times greater to 50 ppm H₂S at 300℃, while the SnO₂-decorated Cr₂O₃ nanorods demonstrate an eleven-fold increase in response. Furthermore, when subjected to various gases (CH₄, H₂S, CO₂, H₂), a notable selectivity toward H₂S is observed. This study paves the way for the development of p-type semiconductor sensors with heightened selectivity and sensitivity towards H₂S, thus advancing the prospects of gas sensor technology.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.2
• /
• pp.1-10
• /
• 2024

The purpose of this study is to explore the direction of elderly education in the age of science and technology. The research contents to achieve the research purpose are, first, to examine the current status of elderly education, and second, to suggest the direction of elderly education in the age of science and technology. Due to the current status of education for the elderly, education for the elderly continues to change and develop, and various programs and activities are provided to help the elderly enjoy a richer retirement life. According to the survey report on the elderly, 11.9% of all elderly people participate in learning activities. Senior welfare centers accounted for the largest number of institutions conducting learning activities for elderly education learning activities participants at 35.5%. First, in the direction of elderly education in the age of science and technology, education on the use of digital technology and information is necessary in the composition of elderly education contents. Second, in the case of elderly education methods, customized elderly education methods are needed. Third, in the case of operating elderly education institutions, specialized education centers for elderly education must be further strengthened and supported. The international community is already forming a consensus that the establishment of new social systems and financial investment due to the increase in the elderly population should be considered a new growth engine rather than a social crisis. Although there is a burden on the social security sector due to the increase in the elderly population, there is a shift in the direction of recognizing the potential capabilities and experiences of the elderly and returning them to social resources. Elderly education in the age of science and technology needs to change to a direction that can build a healthy and progressive society in the future.

• Journal of the Korean institute of surface engineering
• /
• v.57 no.1
• /
• pp.38-48
• /
• 2024

We fabricated In₂O₃ zig-zag nanocolumns(ZZNCs) by oblique angle deposition method based on e-beam evaporator for highly sensitive and selective CH₃COCH₃ sensor. Our results indicate that as the ZZNCs layer stacks, the gas response also increases. In comparison to thin films, ZZNCs at 5 layer show a 117-fold enhancement in gas response and a rapid response time (~2 s). When measured with various gases, it showed a high selectivity towards acetone. Under conditions of 80% R.H., exposure to CH₃COCH₃ gas theoretically indicated a detection limit of 1.2 part-per-billion(ppb). These results suggest the potential of In₂O₃ ZZNCs as a breath analyzer for the diagnosis of diabetes.

• Journal of Korean Society of Archives and Records Management
• /
• v.24 no.2
• /
• pp.89-112
• /
• 2024

Metadata is a crucial component of record management, playing a vital role in properly managing and understanding the record. In cases where automatic metadata assignment is not feasible, manual input by records professionals becomes necessary. This study aims to alleviate the challenges associated with manual entry by proposing a method that harnesses ChatGPT technology for extracting records management metadata elements. To employ ChatGPT technology, a Python program utilizing the LangChain library was developed. This program was designed to analyze PDF documents and extract metadata from records through questions, both with a locally installed instance of ChatGPT and the ChatGPT online service. Multiple PDF documents were subjected to this process to test the effectiveness of metadata extraction. The results revealed that while using LangChain with ChatGPT-3.5 turbo provided a secure environment, it exhibited some limitations in accurately retrieving metadata elements. Conversely, the ChatGPT-4 online service yielded relatively accurate results despite being unable to handle sensitive documents for security reasons. This exploration underscores the potential of utilizing ChatGPT technology to extract metadata in records management. With advancements in ChatGPT-related technologies, safer and more accurate results are expected to be achieved. Leveraging these advantages can significantly enhance the efficiency and productivity of tasks associated with managing records and metadata in archives.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.891-899
• /
• 2024

The Fourth Industrial Revolution is centered on a personalized demand fulfillment economy and is all about transformation and flexible processing that can deliver what customers want in real time across space and time. This paper implements the construction and operation of a packaging platform that can instantly procure the required packaging products based on real-time orders and evaluates its performance. The components of customer satisfaction are flexible and dependent on the situation which requires efficient management of enterprise operational processes based on an e-SCM platform. An OMS optimized for these conditions plays an important role in maximizing and differentiating the efficiency of a company's operations and improving its cost advantage. OMS is a system of mass customization that provides efficient MOT(Moment of Truth) logistics services to meet the eco-friendly issues of many individual customers and achieve optimized logistics operation goals to enhance repurchase intentions and sustainable business. OMS precisely analyzes the collected data to support information and decision-making related to efficiency, productivity, cost and provide accurate reports. It uses data visualization tools to express data visually and suggests directions for improvement of the operational process through statistics and prediction analysis.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.209-217
• /
• 2024

The purpose of this study is to explore development plans by analyzing social interests and perceptions of jiu-jitsu using big data analysis. Network analysis, centrality analysis, and CONCOR analysis were conducted by collecting data for the last 10 years of major domestic portal sites. First, 'judo' was found to be the most important related word in network analysis, and 'judo' was also an important word in the analysis of dgree centrality. In the closeness centrality analysis, "defender" was the most important word, and "sports" was the most important word in betweenness centrality. Finally, as a result of CONCOR analysis, four clusters (related sports and marketing, jiu-jitsu competitions, belt test, supplies and expenses) were formed. As a conclusion of the study, first, words such as 'judo', 'exercise', 'competition', 'dobok', 'gym', and 'graduation' should be actively used to promote jiu-jitsu.As a conclusion of the study, first, words such as 'judo', 'exercise', 'contest', 'dobok', 'gym', and 'graduation' should be actively used to promote jiu-jitsu. Second, it is necessary to share information on training costs through various routes, to make awareness of the graduation process or method common, and to develop safety products and create a safe training culture. Third, it is necessary to find ways to continuously increase the influx of new trainees by attracting steady competitions.

• Journal of Preventive Medicine and Public Health
• /
• v.11 no.1
• /
• pp.123-127
• /
• 1978

The major objective of this research is to identify those hospital characteristics that best explain cost variation among hospitals and to formulate linear models that can predict hospital costs. Specific emphasis is placed on hospital output, that is, the identification of diagnosis related patient groups (DRGs) which are medically meaningful and demonstrate similar patterns of hospital resource consumption. A casemix index is developed based on the DRGs identified. Considering the common problems encountered in previous hospital cost research, the following study requirements are estab-lished for fulfilling the objectives of this research: 1. Selection of hospitals that exercise similar medical and fiscal practices. 2. Identification of an appropriate data collection mechanism in which demographic and medical characteristics of individual patients as well as accurate and comparable cost information can be derived. 3. Development of a patient classification system in which all the patients treated in hospitals are able to be split into mutually exclusive categories with consistent and stable patterns of resource consumption. 4. Development of a cost finding mechanism through which patient groups' costs can be made comparable across hospitals. A data set of Medicare patients prepared by the Social Security Administration was selected for the study analysis. The data set contained 27,229 record abstracts of Medicare patients discharged from all but one short-term general hospital in Connecticut during the period from January 1, 1971, to December 31, 1972. Each record abstract contained demographic and diagnostic information, as well as charges for specific medical services received. The 'AUT-OGRP System' was used to generate 198 DRGs in which the entire range of Medicare patients were split into mutually exclusive categories, each of which shows a consistent and stable pattern of resource consumption. The 'Departmental Method' was used to generate cost information for the groups of Medicare patients that would be comparable across hospitals. To fulfill the study objectives, an extensive analysis was conducted in the following areas: 1. Analysis of DRGs: in which the level of resource use of each DRG was determined, the length of stay or death rate of each DRG in relation to resource use was characterized, and underlying patterns of the relationships among DRG costs were explained. 2. Exploration of resource use profiles of hospitals; in which the magnitude of differences in the resource uses or death rates incurred in the treatment of Medicare patients among the study hospitals was explored. 3. Casemix analysis; in which four types of casemix-related indices were generated, and the significance of these indices in the explanation of hospital costs was examined. 4. Formulation of linear models to predict hospital costs of Medicare patients; in which nine independent variables (i. e., casemix index, hospital size, complexity of service, teaching activity, location, casemix-adjusted death. rate index, occupancy rate, and casemix-adjusted length of stay index) were used for determining factors in hospital costs. Results from the study analysis indicated that: 1. The system of 198 DRGs for Medicare patient classification was demonstrated not only as a strong tool for determining the pattern of hospital resource utilization of Medicare patients, but also for categorizing patients by their severity of illness. 2. The wei틴fed mean total case cost (TOTC) of the study hospitals for Medicare patients during the study years was $11,27.02 with a standard deviation of $117.20. The hospital with the highest average TOTC ($1538.15) was 2.08 times more expensive than the hospital with the lowest average TOTC ($743.45). The weighted mean per diem total cost (DTOC) of the study hospitals for Medicare patients during the sutdy years was $107.98 with a standard deviation of $15.18. The hospital with the highest average DTOC ($147.23) was 1.87 times more expensive than the hospital with the lowest average DTOC ($78.49). 3. The linear models for each of the six types of hospital costs were formulated using the casemix index and the eight other hospital variables as the determinants. These models explained variance to the extent of 68.7 percent of total case cost (TOTC), 63.5 percent of room and board cost (RMC), 66.2 percent of total ancillary service cost (TANC), 66.3 percent of per diem total cost (DTOC), 56.9 percent of per diem room and board cost (DRMC), and 65.5 percent of per diem ancillary service cost (DTANC). The casemix index alone explained approximately one half of interhospital cost variation: 59.1 percent for TOTC and 44.3 percent for DTOC. Thsee results demonstrate that the casemix index is the most importand determinant of interhospital cost variation Future research and policy implications in regard to the results of this study is envisioned in the following three areas: 1. Utilization of casemix related indices in the Medicare data systems. 2. Refinement of data for hospital cost evaluation. 3. Development of a system for reimbursement and cost control in hospitals.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.2 s.308
• /
• pp.19-29
• /
• 2006

As the security of personal information is becoming more important in mobile phones, we are starting to apply iris recognition technology to these devices. In conventional iris recognition, magnified iris images are required. For that, it has been necessary to use large magnified zoom & focus lens camera to capture images, but due to the requirement about low size and cost of mobile phones, the zoom & focus lens are difficult to be used. However, with rapid developments and multimedia convergence trends in mobile phones, more and more companies have built mega-pixel cameras into their mobile phones. These devices make it possible to capture a magnified iris image without zoom & focus lens. Although facial images are captured far away from the user using a mega-pixel camera, the captured iris region possesses sufficient pixel information for iris recognition. However, in this case, the eye region should be detected for accurate iris recognition in facial images. So, we propose a new fast iris detection method, which is appropriate for mobile phones based on corneal specular reflection. To detect specular reflection robustly, we propose the theoretical background of estimating the size and brightness of specular reflection based on eye, camera and illuminator models. In addition, we use the successive On/Off scheme of the illuminator to detect the optical/motion blurring and sunlight effect on input image. Experimental results show that total processing time(detecting iris region) is on average 65ms on a Samsung SCH-S2300 (with 150MHz ARM 9 CPU) mobile phone. The rate of correct iris detection is 99% (about indoor images) and 98.5% (about outdoor images).

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.157-173
• /
• 2011

As the Internet use explodes recently, the malicious attacks and hacking for a system connected to network occur frequently. This means the fatal damage can be caused by these intrusions in the government agency, public office, and company operating various systems. For such reasons, there are growing interests and demand about the intrusion detection systems (IDS)-the security systems for detecting, identifying and responding to unauthorized or abnormal activities appropriately. The intrusion detection models that have been applied in conventional IDS are generally designed by modeling the experts' implicit knowledge on the network intrusions or the hackers' abnormal behaviors. These kinds of intrusion detection models perform well under the normal situations. However, they show poor performance when they meet a new or unknown pattern of the network attacks. For this reason, several recent studies try to adopt various artificial intelligence techniques, which can proactively respond to the unknown threats. Especially, artificial neural networks (ANNs) have popularly been applied in the prior studies because of its superior prediction accuracy. However, ANNs have some intrinsic limitations such as the risk of overfitting, the requirement of the large sample size, and the lack of understanding the prediction process (i.e. black box theory). As a result, the most recent studies on IDS have started to adopt support vector machine (SVM), the classification technique that is more stable and powerful compared to ANNs. SVM is known as a relatively high predictive power and generalization capability. Under this background, this study proposes a novel intelligent intrusion detection model that uses SVM as the classification model in order to improve the predictive ability of IDS. Also, our model is designed to consider the asymmetric error cost by optimizing the classification threshold. Generally, there are two common forms of errors in intrusion detection. The first error type is the False-Positive Error (FPE). In the case of FPE, the wrong judgment on it may result in the unnecessary fixation. The second error type is the False-Negative Error (FNE) that mainly misjudges the malware of the program as normal. Compared to FPE, FNE is more fatal. Thus, when considering total cost of misclassification in IDS, it is more reasonable to assign heavier weights on FNE rather than FPE. Therefore, we designed our proposed intrusion detection model to optimize the classification threshold in order to minimize the total misclassification cost. In this case, conventional SVM cannot be applied because it is designed to generate discrete output (i.e. a class). To resolve this problem, we used the revised SVM technique proposed by Platt(2000), which is able to generate the probability estimate. To validate the practical applicability of our model, we applied it to the real-world dataset for network intrusion detection. The experimental dataset was collected from the IDS sensor of an official institution in Korea from January to June 2010. We collected 15,000 log data in total, and selected 1,000 samples from them by using random sampling method. In addition, the SVM model was compared with the logistic regression (LOGIT), decision trees (DT), and ANN to confirm the superiority of the proposed model. LOGIT and DT was experimented using PASW Statistics v18.0, and ANN was experimented using Neuroshell 4.0. For SVM, LIBSVM v2.90-a freeware for training SVM classifier-was used. Empirical results showed that our proposed model based on SVM outperformed all the other comparative models in detecting network intrusions from the accuracy perspective. They also showed that our model reduced the total misclassification cost compared to the ANN-based intrusion detection model. As a result, it is expected that the intrusion detection model proposed in this paper would not only enhance the performance of IDS, but also lead to better management of FNE.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.4
• /
• pp.113-139
• /
• 2007

This study aims to, looking from a standpoint of network, has investigated the shipping industry's B2B e-marketplace, the characteristics that can earn electronic trust from the users, and characteristics of the web-site. It has examined the mechanism whereby electronic trust be earned and how it affects web-site involvement and service transaction intention. Ultimately, The study attempts to make proposals whereby such trust can lead for a cooperative trading community in the shipping industry's B2B e-marketplace The Covalence structural equation modeling was designed and empirically tested for the shipping industry's B2B e-marketplace. The shipping industry employees were given questionnaires and data were analyzed. Except for perceived security of the three characteristic factors on the web-site, the perceived site quality and characteristics factors in operation only affected co-variables. Transaction Fairness was determined to be the most important factor among exogenous factors increasing electronic trust. With regards to transaction rules, if a transaction is beneficial only to one side, then no long term transaction will not take place. If the concerned parties properly recognize that transaction fairness is crucial to electronic transaction, then it will enormously contribute to successful operations of shipping e-marketplace. Also, Perceived efficiency in transaction also affects electronic trust. This reduces transaction costs and speeds up and simplifies the transaction process. It has reduced greater time and costs than existing off-line transaction, and would positively affect electronic trust. By making an open forum for participants to obtain information for transaction, they can gather useful information, and at the same time, the web-site operator can provide information, which, in turn, will increase electronic trust in electronic transaction. Furthermore, such formation of trust in electronic transaction influences shipping companies in such a way that they will want to continuously participate in the transaction, raising web-site involvement. The result of increased trust is that shipping companies in the future will do business with each other and form a foundation for continuous transactions amongst themselves. Consequently, the formation of trust in electronic transaction greatly influences web-site involvement and service transaction intention. The results of the study have again proved that in order to maintain continuous business relationship with the current clients, electronic trust in virtual space, which operates the shipping industry's B2B e-marketplace, is important for the interested parties.