• Title/Summary/Keyword: infiltration method

Search Result 604, Processing Time 0.029 seconds

A HISTOPATHOLOGIC STUDY OF THE EFFECTS OF ARTHROGRAPHY ON THE TISSUES OF TEMPOROMANDIBULAR JOINT (악관절조영술이 악관절 조직에 미치는 영향에 대한 병리조직학적 연구)

  • Cho Bong-Hae;Nah Kyung-Soo
    • Journal of Korean Academy of Oral and Maxillofacial Radiology
    • /
    • v.22 no.1
    • /
    • pp.137-144
    • /
    • 1992
  • This study was performed to observe the effects of arthrography on the tissues of temporomandibular joint histopathologically. Among 17 rabbits (34 joints), 2 (4 joints) were used as normal control group, others (30 joints) were experimentally arthrographed using 0.03㎖ diatrizoate meglumine (Hypaque meglumine 60, Wintrop, U.S.A). The rabbits were sacrificed at 2-hour, 1-, 2-, 4- and 7-day after experiment and the tissues of temporomandibular joint were prepared according to the usual method for light microscopic examination. The results were as follows: 1. There were no changes of the fibrous connective tissues of the condylar fossa, the fibrous connective tissues and hyaline cartilages of the condyle, and the articular dislc 2. In 2-hour experimental group, the proliferation of the surface synovial membrane cells, the congestion and hemorrage of the vessels were observed. 3. In 1 and 2-day experimental group, minimal lymphocytes infiltration was observed with the proliferation of the surface synovial membrane cells, the congestion and hemorrage of the vessels. 4. In 4-day experimental group, the diminution of the proliferation of the surface synovial membrane cells was seen, but there was no vascular changes. 5. In 7-day experimental group, the tissues showed similar appearance to the normal control group.

  • PDF

Effects of Kumsooyukkun-jeon on Asthma Induced by Ovalbumin in Mice (금수육군전이 Ovalbumin으로 수발된 Mice의 천식에 미치는 영향)

  • 김춘석;최해윤;김종대
    • The Journal of Korean Medicine
    • /
    • v.23 no.3
    • /
    • pp.104-118
    • /
    • 2002
  • Objectives : To study the effects of Kumsooyukkun-jeon on asthma. Methods : Asthma was induced to Balb/c mice with ovalbumin using the method of Hatfield et al. We measured the histological profiles of lung and trachea, numbers of cellular compartments in the bronchoalveolar lavage fluid (BALF), numbers and morphology of the mast cells in the trachea, numbers of mucous-secretory cells in the bronchus, morphology of the bronchus, ultramicroscopical appearance of surface of trachea and number of cilia and mucous-secretory cells by scanning electron microscope. Results : 1. Hypertrophy of mucous membrane of trachea and bronchus and bronchioles in the lung, peritracheal, peribronchus and peribronchiolar inflammatory cell infiltration, and mucoid exudate deposition the lumen were observed in control groups but these phenomena were recovered in the Kumsooyukkun-jeon groups. 2. Cellular compartments including neutrophil and eosinophil were increased in the BALF of control groups but these phenomena were recovered in the Kumsooyukkun-jeon groups. 3. Degranulation and decrease of the numbers of mast cells were detected in the trachea of control groups. However, these phenomena were recovered in the Kumsooyukkun-jeon groups. 4. Shedding, decrease of cilia cell and increase of mucous-secretory cells in the surface of the trachea were measured in control groups but these phenomena were recovered in the Kumsooyukkun-jeon groups. Conclusions : It is considered that Kumsooyukkun-jeon has somewhat favorable effects on asthma.

  • PDF

Fabrication of Inkjet-printed and Non-sintered $BaTiO_3$ Dielectric Film

  • Lim, Jong-Woo;Kim, Ji-Hoon;Kim, Hyo-Tea;Yoon, Young-Joon;Yoon, Ho-Gyu;Kim, Jong-Hee
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2009.11a
    • /
    • pp.80-80
    • /
    • 2009
  • $BaTiO_3$ has high permittivity so that has been applied to dielectric and insulator materials in 3D system-level package integration. In order to achieve excellent performance of device, the $BaTiO_3$ layer should be highly dense. In this study, $BaTiO_3$ thick films were prepared by the inkjet printing method using 4 vol.% $BaTiO_3$ colloidal inks and cured at $28^{\circ}C$ for 5 h after infiltration of polymer resin for non-sintered process using 3 vol.% cyanate ester emulsion ink. From the obtained results. packing density was determined to be improved by overlapping rabbit ears which were generated by coffee ring effect. We also calculated the packing densities of the films and correlated these packing densities to the measured permittivity of the films.

  • PDF

Optimization of Emulsion Polymerization for Submicron-Sized Polymer Colloids towards Tunable Synthetic Opals

  • Kim, Seul-Gi;Seo, Young-Gon;Cho, Young-Jin;Shin, Jin-Sub;Gil, Seung-Chul;Lee, Won-Mok
    • Bulletin of the Korean Chemical Society
    • /
    • v.31 no.7
    • /
    • pp.1891-1896
    • /
    • 2010
  • Submicron-sized polymeric colloidal particles can self assemble into 3-dimensional (3D) opal structure which is a useful template for photonic crystal. Narrowly dispersed polymer microspheres can be synthesized by emulsion polymerization in water using water-soluble radical initiator. In this report, we demonstrate a facile and reproducible emulsion polymerization method to prepare various polymeric microspheres within 200 - 400 nm size ranges which can be utilized as colloidal photonic crystal template. By controlling the amount of monomer and surfactant, monodisperse polymer colloids of polystyrene (PS) and acrylates with various sizes were successfully prepared without complicated synthetic procedures. Such polymer colloids self-assembled into 3D opal structure exhibiting bright colors by reflection of visible light. The colloidal particles and the resulting opal structures were rigorously characterized, and the wavelength of the structural color from the colloidal crystal was confirmed to have quantitative relationship with the size of constituting colloidal particles as predicted by Bragg equation. The tunability of the structural color was achieved not only by varying the particle size but also by infiltration of the colloidal crystal with liquids having different refractive indices.

A Study on Predicting Progress Carbonation using FDM Analysis After Carbonated RC Structures Surface Repair (탄산화가 진행된 기존 RC구조물의 표면보수공법 적용 후 FDM 해석을 이용한 탄산화 진행 예측 연구)

  • Lee, Hyung-Min;Lee, Han-Seung;Kim, Yeung-Kwan
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2015.11a
    • /
    • pp.13-14
    • /
    • 2015
  • Carbonation is the results of the interaction of carbon dioxide gas in the atmosphere with the alkaline hydroxides in the concrete. in other words, of the hydrates in the cement pastes, the one which reacts with readily is Ca(OH)2, the product of the reaction being CaCO3 and which decreases the alkalinity of concrete. Consequently, RC structure is deteriorated due to steel corrosion in concrete. As the importance of maintenance of reinforced concrete structure recently has emerged, the attention of durability of structure has been increasing. There are many studies about durability decline especially due to the carbonation. In order to study carbonation progress after surface repair of carbonated concrete, each carbonation penetration velocity from different repair materials of concrete structure is compared through the experiment of carbonation accelerating CO2 concentration to 100%. As carbonation infiltration progress is predicted through this study, the counterplan of service life evaluation will be prepared on selection of repair materials of concrete structure.

  • PDF

Numerical Modeling of Heat Transfer for Squeeze Casting of MMCs (용탕주조법을 이용한 금속복합재료 제조공정의 열전달 해석)

  • Jung, C.K.;Pyun, H.J.;Jung, S.W.;Nam, H.W.;Han, K.S.
    • Proceedings of the KSME Conference
    • /
    • 2001.06d
    • /
    • pp.319-324
    • /
    • 2001
  • A finite element model for the process of squeeze casting for metal matrix composites (MMCs) in cylindrical mold is developed. The fluid flow and the heat transfer are the fundamental phenomena in the squeeze casing process. To describe heat transfer with solidification of molten aluminum, the energy equation in terms of temperature and enthalpy are applied to two dimensional axisymmetric model which is similar to the experimental system. And one dimensional flow model is employed to simulate the transient metal flow. The direct iteration technique was used to solve the resulting nonlinear algebraic equations. A computer program is developed to calculate the enthalpy, temperature and fluid velocity. Cooling curves and temperature distribution during infiltration and solidification are calculated for pure aluminum. The temperature is measured and recorded experimentally. At two points of the perform inside and one point of the mold outside, thermocouple wire are installed. The time-temperature data are compared with the calculated cooling curves. The experimental results show that the finite element model can estimate the solidification time and predict the cooling process.

  • PDF

Cerebral lesions of encephalitozoonosis in the rabbits died of rabbit hemorrhagic disease (토끼 출혈병(出血病)으로 죽은 토끼의 대뇌(大腦)에서 보인 encephalitozoonosis의 병변(病變))

  • Park, Jae-hak;Lee, Yong-soon;Itakura, C.
    • Korean Journal of Veterinary Research
    • /
    • v.32 no.2
    • /
    • pp.227-233
    • /
    • 1992
  • Out of twenty rabbits which died of rabbit hemorrhagic disease spontaneously occurring in Korea, five animals had a concurrent infection with Encephalitozoon cuniculi in the cerebrum. The lesions were composed of granulomas, leptomeningitis and perivascular cuffing with mononuclear cells. The granulomas consisted of a central necrotic focus surrounded by an infiltration with plasma cells, lymphocytes and macrophages. Gliosis was associated with the granulomas. Gram-positive organisms were detected in the cerebrum from two rabbits. They were oval to rod-shaped with blunt round ends. The distribution of the pathogens was investigated by the direct avidin-biotin peroxidase complex method. They were present in pseudocysts and macrophages. Pseudocysts were found in the granulomas as well as the neuropil without cellular reactions. Some organisms were present within reticulo-endothelial cells of blood capillaries and macrophages in the subarachnoid spaces. These organisms had ultrastructural characteristics consistent with Encephalitozoon cuniculi.

  • PDF

Toxoplasmosis in piglets (자돈의 톡소플라즈마증 발생)

  • Roh, In-soon;Han, Jeong-hee;Kim, Jae-hoon;Ahn, Byeong-woo
    • Korean Journal of Veterinary Research
    • /
    • v.37 no.4
    • /
    • pp.817-823
    • /
    • 1997
  • Suckling piglets and weaned pigs showed anorexia, dehydration, severe abdominal breathing, emaciation and paresis from Oct. 1993. to Nov. 1993. Five 2-week-old piglets were submitted for diagnosis in Kangwon National University. At necropsy, the pin-point well demarcated yellowish white foci were scattered on the surface of the lung, heart, liver, spleen and kidney. Histologically, multifocal areas of necrosis with mononuclear cells infiltration were found in the lung, heart, liver, lymph node, spleen, kidney and small intestine. These lesions tended to be associated with blood vessels. Variable round to ovoid tachyzoites were located at the periphery of the lesions. The organisms were demonstrated as Toxoplasma gondii by immunohistochemical staining method. Ultrastructurally, this parasite was surrounded with parasitophorous vacuole in alveolar macrophage. The parasite was crescent-shaped and $6{\sim}8{\times}1{\sim}2{\mu}m$ in size. It was enclosed by an thick outer membrane and an underlying thin inner membrane. Several club-shaped paired organelles and conoids lay in the cytoplasm at the anterior. Numerous round body and one to several mitochondria were presented in the cytoplasm. Based on the gross findings, histopathology, immunohistochemical and electron microscopic findings, this case was diagnosed as toxoplasmosis in piglets.

  • PDF

Effect of Black Charcoal and Activated Carbon for Reduction of Radon Radioactivity that Emitted from Building Materials (건축재료로부터 방출되는 라돈방사능 감소를 위한 흑탄과 활성탄 효과)

  • Cho, Yun-Min;Lee, Hwa-Hyung
    • Journal of the Korea Furniture Society
    • /
    • v.22 no.1
    • /
    • pp.13-17
    • /
    • 2011
  • Recently, interest in indoor air quality is increasing. Especially, radon radioactivity among the indoor air is a well-known risk factor for lung cancer because of ionizing radiation in the form of ${\alpha}$-particles. This study was carried out to investigate effect of black charcoal and activated carbon for reduction of radon radiation that emitted from building materials. Black charcoal and activated carbon were used as a barrier which was against the infiltration of radon. The source of radon was gypsum board. Two types of charcoal barrier were powder- and board-type with 5 mm, 10 mm thickness respectively. The method for this determination is evaluated radon concentration in chamber. The measurements were performed with radon detector, SARAD3120. Results of this study are as following: Black charcoal and activated carbon confirmed the highly efficient barrier. Radon concentration was reduced from 72% to 85% as compared the control chamber. Radon reduction capability, however, was no difference as barrier's types. Results obtained in ventilation condition, radon concentration shows 5.93 pCi/L on average in the closed condition and shows 2.69 pCi/L in the opened condition.

  • PDF

Modelling of a Base Big Data Analysis Using R Method for Selection of Suitable Vertical Farm Sites: Focusing on the Analysis of Pollutants

  • Huh, Jun-Ho;Seo, Kyungryong
    • Journal of Korea Multimedia Society
    • /
    • v.19 no.12
    • /
    • pp.1970-1980
    • /
    • 2016
  • The problem of food deficiency is a major discouragement to many low-income developing countries. Most of these countries experience constant danger of hunger, malnutrition and diseases as they are unable to maintain their food supplies mainly due to lack of arable lands and modern crop, livestock and fishery production technologies. In addition, the pollutants resulting from the secondary industries are becoming another serious issue in their food problems. The pollutants mixed in the sands blowing from the mainland China and the toxic waters flowing in the farm land form the industrialized zones are some of the examples. The Vertical Farm, or Plant Factory, proposed in this study could be the best alternative food production system for them. Vertical farm is an efficient food production system that yields relatively a large volume of food materials without environmental risks. The system does not require a large open space and manpower and can minimize the possibility of infiltration of pollutants. This research describes a basic model of the system focusing on determining the optimal sites for it based on the meteorological data concentrating on the atmospheric pollutants. The types and volume of pollutants are analyzed and identified through the big data obtained, followed by visualization of analysis results and their comparisons for better understanding.