• 한국공작기계학회논문집
• /
• 제12권6호
• /
• pp.14-21
• /
• 2003

With the increased use of lasers in industrial welding applications, techniques for monitoring and controlling these processes become increasingly important. It is very important that we understand the dynamic behaviors of the laser induced Plume in welding, because the laser induced plume has considerable effects on welding efficiency and the quality of materials. As the plume fluctuation was associated with keyhole instability, unstable vapor plume indicated the process was unstable and would result in poor welds. An Infrared Thermal-vision Camera can be utilized compensate for incurracies encountered in real-time monitoring during laser welding. We have results that instabilities of plume are closely related with hot cracking and defect of laser welding.

• 한국수소및신에너지학회논문집
• /
• 제30권6호
• /
• pp.578-584
• /
• 2019

The occurrence of white plume in the cooling tower is phenomenon that the steam in the air through the cooling tower fan is condensed again by the cold ambient air to become saturated moist air. Accordingly, this can cause many problems like spoiling landscape around the cooling tower, odor of ambient air, falling accident by frozenness in the winter, and traffic accident, etc. This study was to install the heat exchanger in the inside of the cooling tower in order to prevent the white plume phenomenon in the cooling tower without affecting the performance of cooling tower. In addition, this study was to discharge the part of cooling water into the atmosphere through the recirculation of heat exchanger after creating dry air by heating the saturated moist air to the dew point temperature. At that time, this study was to conduct the experimental study in order to secure the optimal design data to prevent the white plume in the cooling tower because it checked the dry·moist temperature and relative humidity in the inside·outside of cooling tower on the moist air, and evaluated the performance of the heat exchanger.

• Journal of Mechanical Science and Technology
• /
• 제14권12호
• /
• pp.1365-1375
• /
• 2000

Two phase flows have been numerically calculated to analyze plume characteristics and liquid circulation in gas injection through a porous plug. The Eulerian approach has been for formulation of both the continuous and dispersed phases. The turbulence in the liquid phase has been modeled using the standard $textsc{k}$-$\varepsilon$ turbulence model. The interphase friction coefficient has been calculated using correlations available in the literature. The turbulent dispersion of the phase has been modeled by the "dispersion Prand시 number". The predicted mean flows is compared well with the experimental data. The plume region area and the axial velocities are increased with the gas flow rate and with the decrease in the inlet area. The turbulent intensity also shows the same trend. Also, the space-averaged turbulent kinetic energy for various gas flow rates and inlet areas has been obtained. The results are of interest in the design and operation of a wide variety of materials and chemical processing operations.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.440-448
• /
• 2003

In the present paper, numerical simulations of buoyant plume dispersion in a neutral and stable atmospheric boundary layer have been carride out. A Lagrangian Stochastic Model (LSM) with a Non-Linear Eddy Viscosity Model (NLEVM) for turbulence is used to generate a Reynolds stress field as an input condition of dispersion simulation. A modified plume-rise equation is included in dispersion simulation in order to consider momentum effect in an initial stage of plume rise resulting in an improved prediction by comparing with the experimental data. The LSM is validated by comparing with the prediction of an Eulerian Dispersion Model (EDM) and by the measured results of vertical profiles of mean concentration in the downstream of an elevated source in an atmospheric boundary layer. The LSM predicts accurate results especially in the vicinity of the source where the EDM underestimates the peak concentration by 40% due to inherent limitations of gradient diffusion theory. As a verification study, the LSM simulation of buoyant plume dispersions under a neutral and stable atmospheric condition is compared with a wind-tunnel experiment, which shows good qualitative agreements.

• 한국레이저가공학회지
• /
• 제2권3호
• /
• pp.11-18
• /
• 1999

This paper describes the weldability of carbon steel and stainless steel using 5㎾ $CO_2$ laser system with nearly multi-mode beam and a parabolic focusing mirror. In the laser welding of steels, major welding parameters are focal point, travel speed, beam power, shield gas and gap tolerance, etc.. Two kinds of gases(Ar, He) were used as a assist gas and supplied through the external nozzle. It is very important for optimum condition to remove plasma plume which absorbs laser beam and to obtain deep penetration and sound weld bead. Bead-on-plate welding tests were carried out for the experiments. Penetration data were obtained with various welding parameters and the effects of welding parameters were discussed. Butt welding tests were performed with various conditions. Only the optimum laser parameters assured good weld quality As a result of this study, We achieve the fundamental weldabilities using a high power $CO_2$ laser for carbon steel and stainless steel.

• 한국산학기술학회논문지
• /
• 제21권10호
• /
• pp.317-324
• /
• 2020

천연가스를 연료로 사용하는 복합화력발전소는 석탄화력 대비 기동 및 정지가 용이하고 오염물질의 배출에 대한 부하가 적어 국내 발전설비 중 차지하는 비중이 꾸준히 상승하고 있다. 그러나 복합화력발전소는 가스터빈의 기동초기 및 저부하 운전 영역에서 황연현상을 일으키는 이산화질소(NO2)의 농도가 높은 특성을 가지고 있어 민원의 원인이 되며, 이의 제어 기술로서 황연제거설비가 2000년대 중반에 개발되어 운영되어 지고 있었다. 하지만 이 기술은 가스터빈 냉간기동 조건에서 기동초기 약 10~20분 동안은 기화시스템의 예열이 충분하게 이루어 지지 않아 황연현상을 제어할 수가 없는 실정이었다. 이에 본 연구에서는 환원제를 기화기를 사용하지 않고 액상의 상태로 가스터빈 Exhaust Duct에 직접 분사하여 황연현상을 제어하는 기술의 도출을 위해 CFD 해석 및 실증시험을 수행하였다. 가스터빈 Exhaust Duct에 위치에 있는 Diffuser에 의해 Duct의 외곽으로 형성된 배기가스에 액상의 환원제를 직분사하는 방안으로 배기가스 조건에 따라 5가지 Case로 분류하여 CFD를 수행하였으며, 그 결과 5가지 Case 모두에서 RMS가 15%이하로 양호한 혼합도를 보였다. 이를 바탕으로 실증설비를 설치 및 시험을 실시한 결과, 기존 기상주입방식에서 제어할 수 없었던 기동 초기 약 10~20분 구간의 황연현상도 완벽하게 제어할 수 있었다.

• 한국항만학회지
• /
• 제14권3호
• /
• pp.361-371
• /
• 2000

A demand of marine outfall system has been much increased for the effective disposal of the wastewater due to population and industrial development at the coastal areas. The outfall system discharges primary or secondary treated effluent into the coastline, or at the deep water, or between these two. The discharge is carried out by constructing a pipeline on the sea bed with a diffuser or with a tunnel, risers and appropriate. The effluent, which has a density similar to that of fresh water, rises to the sea surface forming plume or jet, together with entraining the surrounding salt water and becomes very dilute. Thus there have been growing interests about plume behaviour around the outfall system. Plume or jet discharged from single-port or multi-port diffuser might cause certain impacts on coastal environment. Near field mixing characteristics of discharged water field using CORMIX model have been studied for effective outfall design various conditions on ambient current, depth, flow rate, effluent concentration, diffuser specification, port specification etc.. This kind of analysis is necessary to deal with water quality problems caused by the ocean discharge. The analyzed result was applied to the Pusan Jungang effluent outfall system plan.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.85.2-93
• /
• 2000

A demand of marine outfall system have been much increased for the effective disposal of the wastewater due to population and industrial development at the coastal areas. The outfall system discharges primary or secondary treated effluent into coastline or at the deep water, or between these two. The discharge is carried out by constructing a pipeline on the sea bed with a diffuser or with a tunnel, risers and appropriate. The effluent, which has a density similar to that of fresh water, rises to the sea surface forming plume or jet, together with entraining the surrounding salt water and becomes very dilute. Thus there have been growing interests about plume behaviour around the outfall system. Plume or jet discharged from single-port or multi-port diffuser might cause certain impacts on coastal environment. Near field mixing characteristics of discharged water field using CORMIX model with has been studied for effective outfall design various conditions on ambient current, depth, flow rate, effluent concentration, diffuser specification, port specification etc.. This kind of analysis is necessary to deal with water quality problems caused by the ocean discharge. The analyzed vesult was applied to the Pusan Jungang dffluent outfall system plan.

• 대한원격탐사학회지
• /
• 제22권2호
• /
• pp.141-151
• /
• 2006

태양광을 광원으로 하고 천정방향을 포함한 다양한 고도각을 이용하는 자외선/가시광선영역에서의 흡수분광학이 최근에 지상용 대기원격 측정에 개발되어오고 있다. 이를 이용하여 지표부근에 존재하는 대기 미량 물질의 공간적 분포가 유추될 수 있다. 대기질 측정기술 중 하나인 MAX-DOAS (Multi-axis Differential Optical Absorption Spectroscopy) 기술은 광원으로서 태양산란광을 이용하고, 다양한 고도각에서 태양산란광을 기록하고 분석을 통하여 대기 중 미량 물질을 측정한다. 광주과학기술원 환경모니터링 신기술 연구센터에서 개발된 MAX-DOAS 시스템은 9004년 1월, 5월, 10월에 각각 도시대기, 화산플룸, 화력발전소 플룸의 측정에 적용되었다. 각각의 경우에 $SO_2,\;NO_2,\;BrO,\;O_4$를 정량분석하기 위하여 기록된 MAX-DOAS 스펙트럼은 자외선/가시광선 영역에서의 고유 흡수스펙트럼을 이용한 DOAS 기술을 이용하여 분석 되었다. 그 결과는 Slant Column Density (SCD)로 표현되었다. 플룸 측정의 경우에서는 플룸 속에 포함된 $NO_2,\;SO_2$의 공간적 분포를 파악하기 위하여 플룸의 진행방향과 수직적인 방향에서 MAX-DOAS 스캔이 이루어졌다. 이를 통하여 얻은 단면적을 토대로 $SO_2,\;NO_2$ 농도가 계산되었다. 화산플룸에서 $SO_2$는 580ppbv, 화력발전소 플룸에서 $NO_2$는 337ppbv, $SO_2$는 227ppbv 로 계산되었다.

• 한국산학기술학회논문지
• /
• 제18권5호
• /
• pp.716-722
• /
• 2017

본 연구에서는 Fire Dynamics Simulation (FDS)를 이용하여 화재 기류 전파 경로 상에 플랜트 설비 유무가 공간 내 열유동 특성에 미치는 영향을 알아보기 위해 화원 위치에 따른 지하 복합 발전 플랜트 내 화재 해석을 수행하였다. 화원의 크기는 10 MW이며, 화원 상부의 장애물(설비)의 유무에 따라 화원 위치가 천장 및 화원 상부에서의 열 기류 선단의 전파 특성을 미치는 영향을 정량적으로 비교분석하였다. 결과로서, 화원 상부에 장애물이 있을 경우, 화재 기류가 화원 상부 천장에 도달하는 시간이 장애물이 없을 때에 비해 약 5 배가량 증가하였다. 화원 상부 천장 벽면의 천장 기류 시작 지점으로부터 거리에 따른 각 지점에서 열 기류 선단의 전파 시간의 평균적으로 장애물이 없는 경우에 비해 약 70% 가량 증가하였으며, 특히 10 m 지점에서는 4 배 가까이 증가하였다. 이는 장애물이 화원으로부터 발생하는 수직 열기류의 흐름을 방해하고, 장애물 뒤 쪽에 불안정한 후류가 형성되었기 때문이다. 따라서 지하복합 발전 플랜트 내 피난 및 재난 관리의 초기 대응 목적의 화재 감지 설비 시스템 설계 시 화재 시나리오에 따른 열유동 분석이 중요할 것으로 판단된다.