• Journal of the Ergonomics Society of Korea
• /
• v.33 no.6
• /
• pp.477-486
• /
• 2014

Objective:This study aims to devise industrial injury prevention measures by analyzing industrial injury characteristics including the status of industrial injuries, source of industrial injury and accident type in order to prevent aging workers' industrial injuries that account for more than half in the workplaces in agriculture. Background: Continuous migration from farm to city takes place among young people in rural areas in Korea, a traditionally agricultural country due to rapid industrialization and economic development. The aging rate in rural areas in 2013 was 37.3%, about three times higher than the total aging rate of 12.2% in Korea. According to industrial injury statistics of the Ministry of Employment and Labor, the number of industrial injuries in agriculture shows an uptrend and the industrial injuries of aging workers account for more than 50% each year. Method: Of the 2,970 industrial injury cases occurred in the workplaces in agriculture for five years during 2008 and 2012 offered by a national agency related to health and safety, this study analyzed 1,767 industrial injury cases of aging workers. Results: As a result of an analysis on aging workers' industrial injuries by company size in agriculture, 89.8% of the total number of industrial injuries were analyzed to occur in small scale company. According to aging workers' industrial injuries by source of industrial injury and accident type, the outdoor floor and a fall were analyzed to be the highest at 16.5% and 26.1%, respectively. Conclusion: This study analyzed aging workers' industrial injuries by company size, age, job duration, accident severity, gender, nationality, the source of industrial injury and accident type in order to identify industrial injury characteristics in agriculture. Application: The identification of industrial injury characteristics of aging workers in agriculture is judged to be helpful to devising effective measures to prevent industrial injuries.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.2
• /
• pp.156-172
• /
• 2021

Objectives: To investigate the trends of industrial injuries among long-term health care workers in Korea Methods: T7866 injuries were selected from the total industrial injuries approved by the Industrial Accident Compensation Insurance Act(Occupational Safety and Health Act) among long-term health care workers between 2007 and 2016 in Korea. We analyzied the trends of industrial injuries according to work process, occurrence type, and causes. Results: The industrial injuries among long-term health care workers increased since 2012. The mostly occurred area for industrial injuries were low back areas, which is related that the most serious industrial injuries occurred when the one long-term healthcare worker lift manually the recipient, from bed(ondol, Korean floor heating system) to a wheelchair, bed to bath bed, and wheelchair to bath chair. In addition to this, lack of workforce, increased work intensity due to overwork contributed the increasing of occupational injury. Conclusions: This study suggests that the main causes of industrial injuries were Lack of facilities and equipment for small private long-term care institutions, The physical load that goes into lifting the recipient directly, work intensity such as excessive workload and increased work speed. We suggest that the social publicization of long-term care service for the elderly, avoiding ways to lift recipients directly, introducing lifting machines as well as improving working methods, and reducing the workload of caregivers are required.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.1
• /
• pp.75-82
• /
• 2016

According to the statistics, occupational fatal injuries by the fork lifts were about 30 per year in whole industrial. Fork lifts are widely used in various parts of industries to improve the efficiency of the work. In this study, the current regulations to be adequate in industrial site have to be renew in order to prevent the fatal injuries by the fork lifts. Fatal injury analysis were conducted with several accident cases by the fork lifts. For each accident, the causes of the injuries were examined and proper safety measures were proposed. In this study, the fork lift showed a high fatality rate in industrial accidents and no detailed cause analysis of fatal accidents was conducted in terms of unsafe acts or conditions. First, fork lifts were the highest of the machines caused the accidents. In order to prevent fatal injuries by the fork lifts, the tarket was manufacturing industry. Second, the order of the cause of cognitive engineering agenda in the manufacture industrial was visibility, responsibility and affordance, and revision of acts was proposed. Third, there was not a lots of different points of human error between occurrence types and business sizes. Forth, number of fatalities by the attacker was more than by the inducer.

• Safety and Health at Work
• /
• v.7 no.2
• /
• pp.138-142
• /
• 2016

Background: Household waste collectors (HWCs) are exposed to hazardous conditions. This study investigates the patterns of workplace injuries and work-related illnesses of HWCs. Methods: This study uses cases of workplace injuries and work-related illnesses of HWCs that occurred between 2010 and 2011. We analyzed 325 cases of injuries and 36 cases of illnesses according to the workers' age, length of employment, size of workplace, injured part of body, day and month of injury, type of accident, agency of accident, and collection process. Results: There were significant differences in the effect of workers' length of employment, injured part of body, type of accident, agency of accident, and collection process. Results show that most injuries occur in workers in their 50s and older. This study also shows that 51.4% of injuries occur at businesses with 49 employees or fewer. Injuries to waste collectors happen most often when workers are electrocuted after slipping on the ground. The second most prevalent form of injury is falling, which usually happens when workers hang from the rear of the truck during transportation or otherwise slip and fall from the truck. Work-related illnesses amongst waste collectors are mostly musculoskeletal conditions due to damaging postures. Conclusion: These findings will be instructive in devising policies and guidelines for preventing workplace injuries and work-related illnesses of HWCs.

• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.83-95
• /
• 1999

The half of injuries by carrying-unloading machinery was injuries due to crane. The purpose of this study was to analyze present condition of injuries by the crane, to investigate hazard management model, injury prevention technique, and to suggest safety countermeasures of crane working. The hazard management model is composed of 5 rules and 10 methods. The rules are to remove, separate, protect, make up and correspond. Prior to this crane countermeasures, general protection for head, foot and hand are needed. Hazard prevention affects on industrial management economically and psychologically. The preparation of safety countermeasures are very important for the prevention of industrial injuries. The countermeasures are setting-up of safety culture, active and rationale safety education. As the industrial safety and health system should be performed for the employees' health and life, the industrial competitive power and productivity would be improved.

• Journal of Industrial Convergence
• /
• v.2 no.2
• /
• pp.31-46
• /
• 2004

The ratio of industrial injury in Korea is higher 2~4 times than advanced nations like Japan and Singapore, because the industrial injuries in small-medium industry are higher than large size industry. The investment ability is insufficient for working conditions and prevention of the industrial injuries in the small & medium industry. The industrial safety management of machinery manufacturing for transportation, chemical factory, textile product manufacturing, wire & circuit products for computer, plastic goods manufacturing, and metal products manufacturing was investigated. Therefore, the purpose of the paper is to recognize the seriousness of the industrial injuries, understand product, layout, and machinery, and working conditions, etc., and indicate safety engineering techniques for improvement of quality and productivity under this safety working conditions.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.22-29
• /
• 2012

Robot related injuries in industrial accidents statistics during 2008~2010 have accounted for a total of 109 cases equivalent to 30~40 cases for each of those years. The number of injured compared to the dissemination of industrial robots(51,302 units/2004) can be regarded as quite low. However, the fatal injuries sustained by 7 (6.4%) out of 109 cases paints the stark reality of robot-related accident fatalities. It is a sad probability that as the automation process expands its use of industrial robots which have increased significantly in demand, the incidence of workplace accidents will also increase. Therefore, the incidence of accidents throughout the period of 2008~2010 has been analysed to prevent the injuries due to the increased use of industrial robots. In the analysis, the injuries occurred during the industrial robot operation accounted for 45.9% of the entire accidents. Thus, we examined the present status of the industrial robot operation to analyze the root cause of accidents occurred in our studied time period. We looked at a total of 469 workplaces. 456 workplaces responded in the year 2009 and survey studies were implemented at 13 of the 29 workplaces where work injuries were sustained in the year 2010. Even where protective measures and interlock devices were in place, our studies indicated that workers could access the robot area to perform the tasks in 188 sites(40.1%). Also, the 143 sites(30.5%) had control measures and equipment located in the safety fence. In addition, the robots found at 164 sites(35.0%) could be restarted without additional restarting operation. These three causes accounted for most of the workplace injuries during the industrial robot operations. Futhermore, we confirmed the fact that the protective measures of the current safety regulations were not strictly enforced. Based upon our studies and the investigation of the present status of the industrial robot operation, higher standards in training and supervision of workers in the robot operation must quickly be met in order to prevent these industrial injuries.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.135-141
• /
• 2015

According to the statistics, occupational fatal injuries by mobile cranes were about 12 per year in whole industrial. Mobile cranes are widely used in various parts of industries to improve the efficiency of the work. However considerable number of fatal injuries happen each year during the operation of the machines. In this study, the current regulations to be adequate in industrial site have to be renew in order to prevent the fatal injuries by mobile cranes. Fatal injury analyses were conducted with several accident cases by the mobile cranes. For each accident, the causes of the injuries were examined and proper safety measures were proposed. In this study, the mobile crane showed a high fatality rate in industrial accidents and no detailed cause analysis of fatal accidents was conducted in terms of unsafe acts or conditions. This study proposed a revision of the standard guideline as an accident prevention measures through in-depth analysis of fatal accidents. First, among the mainly five machines caused the accidents, mobile crane was higher for the second showed 0.6% for number of fatalities compared to number of mobil cranes and for the third showed 11% for number of fatalities compared to number of injuries. Second, main cause of cognitive engineering agenda was visibility, responsibility, affordance. As the measures to prevent accidents before starting operation, alternative revision for the fool proof including visibility, responsibility, affordance etc. for the fool proof measures was proposed. Third, alternative revision as cognitive accident prevention for the fail safe measures was proposed.

• Korean Journal of Occupational Health Nursing
• /
• v.28 no.2
• /
• pp.75-82
• /
• 2019

Purpose: This study aimed to determine the influence of injury and/or injured area classification on depression in patients with industrial injuries. Methods: The participants comprised438 patients who consented to participate and completed self-reported questionnaires. Data were analyzed using SPSS/WIN version 22.0 for descriptive statistics, $x^2$ test, fisher's exact test, ANOVA, and post-hoc $Scheff{\acute{e}}$ test. A stepwise multiple regression analysis was used to identify factors influencing depression. Results: The results indicated that the effect of disease classification and injured areas on depression were significantly different in patients with industrial injuries. The results further showed that severe depression was significantly higher in cardiovascular patients and patients with an injured area of the head and waist. The most powerful predictor was age (50~59 years), return to work (reemployment), disease classification (cardiovascular), and injured area (head, including vascular disease). Conclusion: This study showed that the most influential variable of depression in patients with industrial injuries were cardiovascular issues, injury areas of the head and waist, being aged 50~59 years, and reemployment. To reduce depression in these patients, it is important to develop and implement a psychiatric rehabilitation program that helps patients to formulate a concrete plan and goal for recovery, enabling patients to actively engage in their rehabilitation.

• Journal of Korean Institute of Industrial Engineers
• /
• v.6 no.2
• /
• pp.1-11
• /
• 1980

The purpose of this study is to attempt a systems approach to press injuries using Fault Tree Analysis. Three major techniques were used: Industrial Accident Dynamics (IAD) by which accident analysis can be made, Fault Tree Analysis (FTA) by which quantification of accident analysis can be made, Computerized Algorithm by which minimal cut set to accident can be identified. A survey has been made of ninety two cases of press injuries from seven industrial firms. All cases of the accident are analyzed using the three techniques. According to the analysis, lack of safety knowledge and improper scaffold seem to be the primal cause of accident. Comparisons of the accident causes to actual accident reports (National Institute of Labor Science) demonstrates that the FTA is a powerful tool for industrial accident prevention. On the basis of this result, some countermeasures are discussed.