Journal of the Korea Safety Management & Science (대한안전경영과학회지)

Korea Safety Management & Science (대한안전경영과학회)
권호 표지
DOI QR코드

DOI QR Code

Alternative Prevention on Human Error of Fatal Injuries by the Folk Lifts

지게차 사망재해의 인적오류에 대한 대안

  • Kang, Hyun-Su (Department of Industrial Engineering, Ajou University) ;
  • Park, Peom (Department of Industrial Engineering, Ajou University)
  • 강현수 (아주대학교 산업공학과) ;
  • 박범 (아주대학교 산업공학과)
  • Received : 2016.01.20
  • Accepted : 2016.03.21
  • Published : 2016.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

According to the statistics, occupational fatal injuries by the fork lifts were about 30 per year in whole industrial. Fork lifts are widely used in various parts of industries to improve the efficiency of the work. In this study, the current regulations to be adequate in industrial site have to be renew in order to prevent the fatal injuries by the fork lifts. Fatal injury analysis were conducted with several accident cases by the fork lifts. For each accident, the causes of the injuries were examined and proper safety measures were proposed. In this study, the fork lift showed a high fatality rate in industrial accidents and no detailed cause analysis of fatal accidents was conducted in terms of unsafe acts or conditions. First, fork lifts were the highest of the machines caused the accidents. In order to prevent fatal injuries by the fork lifts, the tarket was manufacturing industry. Second, the order of the cause of cognitive engineering agenda in the manufacture industrial was visibility, responsibility and affordance, and revision of acts was proposed. Third, there was not a lots of different points of human error between occurrence types and business sizes. Forth, number of fatalities by the attacker was more than by the inducer.

Keywords

References

  1. Shin, W-C., Kim, J-H. and Hong, Y-S.(2013), "Case studies on the Practical Ways of Preventing Injuries in Small Manufacturing Industries.", the Korean Safety Management Science, 15(2): 39-45 https://doi.org/10.12812/ksms.2013.15.2.39
  2. Ministry of Employment and Labor(2013), "Analysis of Industrial Accidents in 2012", Report of Ministry of Employment and Labor. pp8-403
  3. Local rule on occupational safety and health standard. Part 2. from Article 171 to Article 183.
  4. Park, J-H., Hong, Y-S., Kim, E-H., Kim, S-H. and Jo, S-P.(2013), "Application Case Study of Human Error Prevention in Industrial Safety.", Report of OSHRI, pp1-73
  5. Ko, J-H., Jung, W-D. and Kim, J-W.(2007), "An Analysis of Human Error Mode and Type in the Railway Accidents and Incidents", Journal of KOSOS, 22(4):66-71
  6. Park, J-H., Park, T-J., Im, H-K. and Seo, E-H.(2007), "Analysis of Crane Accidents by Using a Man-machine system model", Journal of the KOSOS, 22(2):59-66
  7. Seo, E-H., Bae, G-S., Lim, H-K., Chang, S-R. and Park, J-H.(2006) "Research for the Improvement of Ergonomics of Man-Machine Work Systems.", Report of OSHRI, pp14-75
  8. Jeong, B-Y., Lee, J-D. and Yang, S-T.(2003), "Development of Accident Analysis System for Human Error Prevention.", Journal of the Korean Safety Management Science, 5(3): 1-10
  9. Ham, D.H.(2008), "Design Requirements-Driven Process for Developing Human-System Interfaces.", Journal of the Korean Safety Management Science, 10(1): 83-90
  10. Ki, D-H. and Kim, W-K.(2005), "Crane fatalities Condition and safety measures", Journal of the KOSOS, 20(1):137-142
  11. Lee, D-H. and Na, Y-K.(1998), "Improvement of Investlagation Items of Fatal Industrial", Journal of the KIIS, 13(4):279-285
  12. Sen, R,N. and Das, S.(2000), "An ergonomics study on compatibility of controls of overhead cranes in a heavy engineering factory in West Bengal", Applied Ergonomics, 31:179-184 https://doi.org/10.1016/S0003-6870(99)00037-X
  13. Park, J-H.(2015), "Compatibility of the Direction Sign on the Pendent Switch of Overhead Cranes", Journal of the Ergonomics Society of Korea, 34(1):75-83 https://doi.org/10.5143/JESK.2015.34.1.75
  14. Park, Y-K.(2003), " A study on the Analysis and Prevention of Industrial Accident for Forklift", Myongji University Graduate School, Ph.D. Thesis
  15. Shin, W-C., R, H-S. and Park, J-H.(2013), "Proposed revision of standard on articles for forklift trucks in manufacturing industries studies on the practical Ways of preventing injuries in small manufacturing Industries.", Journal of the Korean Society of Safety. 28(4): 33-37 https://doi.org/10.14346/JKOSOS.2013.28.4.033
  16. Chae, J-M.(2013), " A Study on Safety Improvement of Forklift truck", Conference of the Korean Safety Management & Science in spring : 41-52
  17. J. Lambert, et al.(2013), "Forklift stability and other technical safety issues", Accident Research Centre Report, Monash University, Australia, 2013.4
  18. Kang, H-S. and Park, Peom(2016), " Alternative Prevention on Human Error of Fatal Injuries by the Mobile Cranes", Journal of the Korean Safety Management & Science, 17(4): 135-141
  19. Department of Employment and Labor(201 2-2014), "Site Analysis of Industrial accidents"
  20. Jung, B-Y. and Ree, D-G(2014), " Ergonomics", Minyoung Co. Ltd, 3:58-138