• 제목/요약/키워드: industrial difference

검색결과 3,451건 처리시간 0.031초

자동차 화상시뮬레이터에서 운전 중 동시과제 수행에 고농도 산소와 향 자극이 미치는 영향 (Effect of Highly Concentrated Oxygen and Stimulus of Odors on the Performance of Secondary Tasks While Driving Using Vehicle Graphic Driving Simulator)

  • 지두환;민철기;류태범;신문수;정순철;강진규;민병찬
    • 산업경영시스템학회지
    • /
    • 제35권4호
    • /
    • pp.55-62
    • /
    • 2012
  • In this study, it was observed through the ability of performing secondary tasks and baseline fetal heart rate how the supply of lavender, peppermint and highly concentrated oxygen (40%) affected distraction due to the performance of secondary tasks in the driving environment. Twelve male university students conducted secondary tasks while driving in the environments (6 in total) mixed and designed with oxygen concentration (21%, 40%) and the condition of odors (Normal, Lavender, Peppermint). The test was proceeded in order of stable state (5mins), driving (5mins), and secondary tasks (1min), and by extracting ECG data from every section by 30secs, the mean value of baseline fetal heart rate was calculated. As a result of analysis, in the ability of performing secondary tasks, a percentage of correct answers showed no difference in oxygen concentration and the condition of odors (p > 0.05). In performance completion time, a percentage of correct answers decreased showing a statistically significant difference in the condition of odors compared with the condition where odors were not provided (p < 0.05). As for baseline fetal heart rate, in the comparison between sections, while performing secondary tasks, it increased showing a significant difference compared with stable state and driving state (p < 0.05). The effect of interaction was observed in oxygen concentration and the condition of odors. When odors were not provided, baseline fetal heart rate decreased in 40% oxygen concentration compared with 21% oxygen concentration (p < 0.05), however, when peppermint was provided, it increased in 40% oxygen concentration compared with 21% oxygen concentration (p < 0.05). In conclusion, the fact that the condition of odors increased the ability of calculation, and when only the highly concentrated oxygen was provided, parasympathetic nerve system was activated, however, when highly concentrated oxygen was provided with peppermint at the same time, sympathetic nervous system (sns) was activated, which had a negative effect on the autonomic nervous system was drawn.

전복(Haliotis discus hannai) 추출물의 혈압강하, 항산화능 및 항혈전능에 대한 in vitro 효과 (In vitro Anti-hypertensive, Antioxidant and Anticoagulant Activities of Extracts from Haliotis discus hannai)

  • 김학렬;강성국;김인철;김선재;김두운;마승진;고천성;이화;김민정;이태훈;함경식
    • 한국식품영양과학회지
    • /
    • 제35권7호
    • /
    • pp.835-840
    • /
    • 2006
  • 본 연구에서는 전복육질과 내장의 추출방법에 따른 추출물의 혈압강하, 항산화, 항혈전 효과에 대한 in vitro 효과를 구명하고자 하였다. 전복육질(abalone body)과 내장(visceral portion)의 80% ethanol 추출물은 ACE(angiotensin converting enzyme)활성에 대해 높은 억제효과를 나타내었으며, 전복육질 추출물의 경우 농도의 증가에 따라 증가되는 경향을 나타내었다. 그러나 내장추출물은 농도증가에 따라 큰 차이가 없는 것으로 나타났다. 수용성추출물의 ACE활성억제효과는 농도별에 따라 증가되는 경향을 나타내었으며, 육질과 내장 간에 큰 차이가 있는 것으로 나타났다. 아질산염 소거활성으로 평가한 항산활 효과는 80% ethanol 추출물의 경우, 전복육질에서 농도증가에 따라 증가된 수준을 나타내었으나 그 수치는 낮은 값을 나타내었다. 내장의 경우, 낮은 농도에서는 육질과 비슷한 수준을 유지하였으나 농도가 증가함에 따라 높은 항산화활성을 나타내었다. 수용성추출물의 항산화효과는 농도증가에 따라 증가된 수준을 나타내었으나 육질과 내장에 큰 차이는 보이지 않았다. 항혈전 효과는 80% ethanol 추출물에서 육질의 prothrombin time이 상대적으로 내장의 prothrombin time보다 높게 나타났다. 수용성추출물의 경우, 항혈전 효과가 거의 없었으며, 전복의 육질이나 내장에 따른 특별한 차이점 또한 없는 것으로 나타났다. 수용성추출물을 48시간 냉장온도에서 저장한 후의 전복육질과 내장의 ACE 활성에 대한 억제효과는 육질과 내장간에 큰 차이가 있었으나 0 time의 값과 큰 차이를 나타내지 않았다. 항산화 효과는 육질과 내장의 경우 농도증가에 따라 직선적인 증가경향을 나타내었으나, 육질에 비해 내장에서 높은 항산화능이 있는 것으로 나타났다. 전복육질과 내장의 prothrombin time은 큰 차이가 없었으며, activated partial thromboplastin time 또한 큰 차이가 없는 것으로 나타났다.

제품속성에 대한 디자인의 역할에 관한 기초적 연구 (A Preliminary Study on the Role of Industrial Design in Attributes of Products)

  • 이현이;김명석
    • 대한인간공학회:학술대회논문집
    • /
    • 대한인간공학회 1997년도 춘계학술대회논문집
    • /
    • pp.212-226
    • /
    • 1997
  • Industrial design aiming the mutual benefit of both user and manufacturer demands grasping and analyzing the needa and wants of consumer for the establishrment of the optimum plan and production by attribute oriented approach. Inspite of its usefulness, however, it might be impossible to help industrial designers to develop a new product effectively without full understanding of industrial design activity in attributes of products and using the appropriate methodology for grasping the main attributes. This thesis is purposed for developing the guideline of research models of consumer for industrial design by studying characteristics of industrial design activity in attributes of products through bibliography and defining the clear limit of design research focused on consumer selection through comparison with real purchase decision making procedure at every phase. Through the observation and analysis of the real purchase decision making procedure following the proposed guideline, the possibility of difference between the two cases has been shown in both theoretical and practical aspects.

  • PDF

Measurement of electron density of atmospheric pressure Ar plasma jet by using Michelson interferometer

  • Lim, Jun-Sup;Hong, Young June;Choi, Eun Ha
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.195.1-195.1
    • /
    • 2016
  • Currently, as Plasma application is expanded to the industrial and medical industrial, low temperature plasma applications became important. Especially in medical and biology, many researchers have studied about generated radical species in atmospheric pressure low temperature plasma directly adapted to human body. Therefore, so measurement their plasma parameter is very important work and is widely studied all around world. One of the plasma parameters is electron density and it is closely relative to radical production through the plasma source. some kinds of method to measuring the electron density are Thomson scattering spectroscopy and Millimeter-wave transmission measurement. But most methods have very expensive cost and complex configuration to composed of experiment system. We selected Michelson interferometer system which is very cheap and simple to setting up, so we tried to measuring electron density by laser interferometer with laser beam chopping module for measurement of temporal phase difference in plasma jet. To measuring electron density at atmospheric pressure Ar plasma jet, we obtained the temporal phase shift signal of interferometer. Phase difference of interferometer can occur because of change by refractive index of electron density in plasma jet. The electron density was able to estimate with this phase difference values by using physical formula about refractive index change of external electromagnetic wave in plasma. Our guiding laser used Helium-Neon laser of the centered wavelength of 632 nm. We installed chopper module which can make a 4kHz pulse laser signal at the laser front side. In this experiment, we obtained more exact synchronized phase difference between with and without plasma jet than reported data at last year. Especially, we found the phase difference between time range of discharge current. Electron density is changed from Townsend discharge's electron bombardment, so we observed the phase difference phenomenon and calculated the temporal electron density by using phase shift. In our result, we suggest that the electron density have approximately range between 1014~ 1015 cm-3 in atmospheric pressure Ar plasma jet.

  • PDF

천연염색.도장처리 단판의 내변퇴색시험에 따른 색차특성 (Color Difference of Natural Dyed- and Finished Veneers by Fading Test)

  • 서진석;김종인;김소라;박령재;박상범
    • 한국가구학회지
    • /
    • 제24권4호
    • /
    • pp.408-415
    • /
    • 2013
  • In order to evaluate a feasibility of industrial art use of veneer such as cylindrical laminated veneer lumber, the veneers of 4 species of Korean pine, radiata pine, yellow poplar and Japanese cypress were natural dye-colored and clear finished. Natural dyes were red color originated from sappanwood, blue color from polygonum indigo, and yellow color from Amur cork tree and gardenia. the clear coats of crack seal clear and UV protection oil were applied on the dyed veneer. The dyeing and finishing characteristics through fading test were summarized as follows; In non-dyed and non-finished Korean pine veneer, lightness was decreased and yellow and red hues increased after fading test. In natural dyed- and finished-veneer, color difference of gardenia-mixed Amur cork tree was generally highest, and that of polygonum indigo was lowest. Compared to non-treatment of veneers of Korean pine and yellow poplar, color difference decreasing effect by finishing was shown in crack seal clear and UV protection oil. In addition, UV protection oil was more favorable than crack seal clear with more decreased color difference. In result, maximum values of color difference after fading for 8 days were recorded about 16 to 20, which are remarked 'very much' of 12.1 or more when reviewing with 'National bureau of standards unit in USA'.

  • PDF

PC방(게임방)에서 헤드셋을 착용한 중•고등학생의 소음 노출수준 (Noise Exposure Levels for the Middle and the High School Students using Headsets in the PC Rooms)

  • 신재우;김현욱
    • 한국산업보건학회지
    • /
    • 제15권2호
    • /
    • pp.135-143
    • /
    • 2005
  • This study was conducted to measure the exposure levels to noise for the middle and the high school students who worn headsets in the PC rooms. The noise levels from the headsets were measured with noise dosimeters, and the statistical relationships between the utilization pattern, user's views on the PC rooms and it's environment were analyzed for the selected PC rooms in the Ahnshan area. The results were as follows; 1. No significant difference was found in the number of uses and average time spent per day by education level and by sex of the users(p>0.05). 2. No statistical significant difference was found between the contents selected by education level of the users (p>0.05). The male participants overwhelmingly enjoyed the PC games (98.3 %) while females selected for listening music (75.0 %) with significant difference(P<0.05), followed by browsing internet and PC communications (70.0 %), PC game (66.7 %) and chatting (33.3 %). 3. The actual noise measurements of the headsets worn by the users of different sexes and educational backgrounds produced no differences(p>0.05), while a significant difference was found between genders (p<0.05). 4. For sound pressure level measurements, the weighted average(Lavg) of 84.5 dB(A) on the left headsets exceeded that of 79.8 dB(A) on the right headsets significantly(p<0.01) and the maximum value of 96.9 dB(A) on the left headsets exceeded the maximum value of 93.5 dB(A) on the right headsets(p<0.01). 5. The actual noise measurements of the headsets worn by the users of different sexes and educational backgrounds produced no differences(p>0.05), however, the contents selected by the users with different educational backgrounds were noted with significant difference(p<0.05) while no difference was found by gender(p>0.05).

위상비교와 시간차를 복합한 정밀 방향탐지 기술 (An Accurate Direction Finding Technology Using a Phase Comparison and Time Difference of Arrival)

  • 임중수
    • 한국산학기술학회논문지
    • /
    • 제12권11호
    • /
    • pp.5208-5213
    • /
    • 2011
  • 본 논문에서는 배열안테나에 도달한 전파의 위상차와 시간차를 이용하여 방향탐지 정확도가 높고 방향모호성이 없는 새로운 방향탐지 기술을 제안하였다. 21세기의 전자정보시스템에는 배열 안테나에 도달하는 신호의 위상차를 이용하는 위상차 방향탐지 방식 또는 배열안테나에 도달하는 신호도착 시간차를 이용하는 방향탐지 방식이 주로 사용되고 있다. 시간차를 이용하는 방식은 장치구성은 간단하지만 좁은 안테나 배치공간에서는 방향탐지 정확도가 나쁘고, 위상차 방식은 좁은 안테나 배치공간에서도 방향탐지 정확도는 높으나 방향모호성이 발생한다. 본 논문에서는 두 방식의 장점을 결합한 방향탐지 정확도가 높고 방향모호성이 없는 새로운 방향탐지 기술을 제안하였으며, 실제 운용환경과 유사한 잡음환경에서 방향탐지 오차를 모사하여 제안된 방식의 우수성을 입증하였다.

PSM 기법을 적용한 학교급식 공동구매 공산품의 가격민감도 분석 연구 (The Price Sensitivity for Industrial Products from A Group Buying System at School Foodservices : An Application of Price Sensitivity Measurement Technique)

  • 이서희;이호진;손춘영;함선옥
    • 디지털산업정보학회논문지
    • /
    • 제16권2호
    • /
    • pp.117-128
    • /
    • 2020
  • The aim of this study was to examine price sensitivity of industrial products purchased via a group buying system and how industrial products for a group buying system differ from general industrial products, and then identify the major factors in selecting products and the important determinants in purchasing industrial products for school foodservices. The survey was conducted with 250 dietitians (teachers) in Gyeonggi-do Province, who were using industrial products for a group buying system and general industrial products. A paired t-test showed a difference in satisfaction between industrial products for a group buying system and general industrial products by factors, while statistically significant differences were found for red pepper paste, fermented soybean paste and soy sauce in all nine satisfaction factors, including product quality, packaging state, labeling, hygiene, item diversity, specification diversity, price appropriateness and supply. Moreover, analyzing price sensitivity for industrial products for a group buying system, using the PSM method with respect to the issue of high price, showed that the respondents considered that the current unit purchase prices were high for all items investigated. This study suggests that schools would purchase more industrial products for a group buying system, when the pricing of the products are considered with the purchase intention of dietitians (teachers).

산업계관점 대학평가의 성과와 개선방안 (The study about achievement and improvement plans of the university assessment of industrial point of view)

  • 김왕준;장귀덕;김민규;박주형
    • 공학교육연구
    • /
    • 제21권5호
    • /
    • pp.54-63
    • /
    • 2018
  • The university assessment of Industrial point of view that is the evaluation of university's outcomes was started in 2008 to find out university's social and industrial contribution rate by evaluating the added value of raising up competent people and technical development through university courses. This study is for analyzing outcomes of university assessment of Industrial point of view in the second period and searching for improvement suggestions of evaluation indexes and ways. The outcomes of university assessment of Industrial point of view in the second period is that are the contributions overcoming the difference of industrial requests and university's courses, information offering to university about industrial requests, the substantiate indicator for evaluating the suitability of university's courses and the improvement of university's competitiveness through course's upgrades, The ways improving the university assessment of Industrial point of view are introducing the ways of industrial university's consulting, evaluation for certification and involving graduate school's courses assesment, reinforcing the analysis of industrial requests, improving the indexes of courses and setting up feedback system.

일반 사무실 실내공기 내 부유미생물의 분포 양상 (Profile of airborne microorganisms distributed in general offices)

  • 김기연;노영만;김윤신;이철민;심인숙
    • 한국산업보건학회지
    • /
    • 제18권1호
    • /
    • pp.11-19
    • /
    • 2008
  • Mean levels of airborne bacteria, airborne fungi, temperature, relative humidity and carbon dioxide in total 69 general offices were $426({\pm}83)\;cfu/m^3$, $234({\pm}125)\;cfu/m^3$, $25.9({\pm}1.3)\;^{\circ}C$, $57.7({\pm}8.6)\;%$, $422({\pm}38)\;ppm$, respectively. The I/O ratio of airborne bacteria and fungi was over 1 and there was no significant difference among temperature, relative humidity and carbon dioxide in total 69 general offices. In construction period, a concentration of airborne bacteria and fungi was significantly highest in general offices constructed under one year and over three years since construction, respectively (p<0.05). The concentration of airborne fungi in general offices located at basement was significantly higher than those located at ground (p<0.05). No significant difference of airborne bacteria and fungi in general offices was found regardless of installation of HVAC system (p>0.05). The dominant bacterial genera identified in general offices was Staphylococcus, followed by Micrococcus, Bacillus, and Corynebacterium while usarium, Penicillium, Aspergillus, Alternaria, Rhizopus and Mucor were identified as dominant fungal genera in general offices.