• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.475-481
• /
• 2019

건축물의 생애주기 전반에 걸쳐 중요한 영향을 줄 수 있는 건축물의 성능과 관련하여, 설계 초기단계에서 계획안의 환경성능을 검토할 수 있는 디자인 피드백의 중요성이 점차 부각되고 있다. 그런데, 건설산업 특성에 따른 전문분야 도메인 구분으로 인해, 서로 다른 어플리케이션 사이에서 데이터 호환성의 문제에 따른 제약이 많은 실정이다. 이에, 지식기반 디자인 방법론에 기반하여, 본 연구는 건축물의 형상과 연동 가능한 BIM 객체의 기하정보에 대한 상관관계 정보체계를 제안하도록 한다. 이를 위해, 오피스 건축물의 기획 및 계획설계 단계를 대상으로, 상용 BIM 시스템인 Autodesk Revit을 활용하여 매스 형상에 파라메트릭 제약조건을 설정한다. 나아가, 오피스 매스의 형상정보와 양방향 프로세스로 연동가능하도록, Autodek Green Building Studio 엔진에서 분석가능한 해석모델로 변환함으로써, 파라미터에 의한 형태 변형에 따른 다양한 대안들에 대하여 실내조도 성능을 시뮬레이션한다. 이를 통해, 디자인 조건들을 만족시켜주는 범위 내에서 적절한 환경성능의 검토가 가능한 정량적인 의사결정 방법을 제시하고자 한다.

• 한국산업보건학회지
• /
• 제24권1호
• /
• pp.46-51
• /
• 2014

Objectives: The principal aim of this study was to compare the concentrations of gaseous pollutants emitted in enclosed pig buildings between different rates of general ventilation and determine the variations in the patterns of gaseous pollutants as affected by ventilation rate. Materials and Methods: The experiment was performed in the growing/finishing room($20.0m{\times}12.0m{\times}3.0m$) of a pig confinement building located on the experimental farm of Seoul National University. The conditions of the general ventilation rate for three treatments were 30%($4.12m^3s^{-1}$), 50%($6.87m^3s^{-1}$) and 70%($9.61m^3s^{-1}$). The data presented in the study were collected overa total of 45 days, 15 days for each of the three treatments from March to May 2011. A total of six air samplings were taken at 1.5m above the floor of the pig building. The environmental agents measured in the pig building were ammonia, hydrogen sulfide and odor concentration index for gaseous pollutants with temperature and hydrogen sulfide for thermal factors. Results: There were significant differences in the ammonia and odor concentration index in the pig building among the three general ventilation rate conditions(p<0.05), whereas hydrogen sulfide did not show a significant difference among three conditions of general ventilation rate(p>0.05). As the general ventilation rate applied to the pig building increases, it appears that all the indoor environmental agents measured in this study simultaneously decrease. Conclusions: The gaseous pollutants significantly affected by the general ventilation rate in pig building were ammonia and odor concentration index(p<0.05). However, it was found that hydrogen sulfide and thermal factors, temperature and relative humidity were not influenced significantly by variation in the general ventilation rate.

• 산업경영시스템학회지
• /
• 제42권3호
• /
• pp.193-205
• /
• 2019

Looking at recent safety accidents in buildings, most of them due to lack of FM expertise, and this is due to human resources. In each all industry areas, some companies are competitive, representational, and leading in the market through long-term expertise and research in their respective fields. In the field of FM industry, some companies offer core-competencies in internal and external innovative building management through competition with others. However, old custom and old management form still exist in the FM field. However, an old custom and old management system still exist in the FM field; it forces cost-cutting and caused by carelessness in technical development competitiveness and safety measures. The government control by safety inspection and facility inspection through legislation of building management, but the management is still weak as a side of in the facility management section due to inspect sth as a mere formality and submit a paper report. These facts exist different kind of usage of the building have a three-party encounter between a building owner, user, and FM enterprises. In this research identify survey, especially building owner (manager)'s choice perception priority for optional factors to choose FM enterprises. Based on this, FM enterprises will be forced to seek a new dimension for better building management. In this light, the purpose of the research is to shape changes in the FM market culture safely and providing better service in building management and understanding building owner's insight through this research's information.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2005년도 공동추계학술논문발표회 논문집
• /
• pp.347-351
• /
• 2005

• Computers and Concrete
• /
• 제17권1호
• /
• pp.1-27
• /
• 2016

Final construction project cost is significantly determined by construction rate. The Industrialized Building System (IBS) was promoted to enhance the importance of prefabrication technology rather than conventional methods in construction. Ensuring the stability of a building constructed by using IBS is a challenging issue. Accordingly, the connections in a prefabricated building have a basic, natural, and essential role in providing the best continuity among the members of the building. Deficiencies of conventional precast connections were observed when precast buildings experience a large induced load, such as earthquakes and other disasters. Thus, researchers aim to determine the behavior of precast concrete structure with a specific type of connection. To clarify this problem, this study investigates the capacity behavior of precast concrete panel connections for industrial buildings with a new type of precast wall-to-wall connection (i.e., U-shaped steel channel connection). This capacity behavior is compared with the capacity behavior of precast concrete panel connections for industrial buildings that used a common approach (i.e., loop connection), which is subjected to monotonic loading as in-plane and out-of-plane loading by developing a finite element model. The principal stress distribution, deformation of concrete panels and welded wire mesh (BRC) reinforcements, plastic strain trend in the concrete panels and connections, and crack propagations are investigated for the aforementioned connection. Pushover analysis revealed that loop connections have significant defects in terms of strength for in-plane and out-of-plane loads at three translational degrees of freedom compared with the U-shaped steel channel connection.

• 설비공학논문집
• /
• 제21권12호
• /
• pp.688-694
• /
• 2009

With the increase in the demand for sustainable and environmentally-friendly development, Green Building Certification System came into force in 2002, Evaluation parts of Green Building Certification System are divided into land use and transportation, energy, ecological environment, and indoor environment. Alloted point for the part of energy is larger than other part, thus we can say that this part is very important to increase the green building performance. This study aims to analyze the present condition of design and construction for the part of energy in the certificated green school building. Total 40 certificated school buildings were selected and average scoring rate of each item was evaluated. Key particular to be considered were suggested to improve the item of energy consumption.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.87-88
• /
• 2021

Due to the effects of COVID-19 and the Fourth Industrial Revolution, construction engineering education has been required to change. As part of efforts to respond to changes, innovative teaching methods such as team-based learning have been introduced, but specific measures are still lacking. In this regard, this study proposed plans for building construction curriculum operation applied with team-based learning, building construction course operation applied with team-based learning, and building construction course grade evaluation applied with team-based learning. It is expected that the proposed operation plans can be used in educational settings where team-based learning is to be applied in a changing class environment.

• 한국산학기술학회논문지
• /
• 제13권10호
• /
• pp.4902-4909
• /
• 2012

본 논문에서는 TOU 요금제 기반에서 제어구간 설정방법을 사용한 건물 냉방시스템 실내온도 제어 알고리즘을 제안한다. 건물 실내온도를 최적제어하기 위한 제어구간 설정은 스위칭방법과 선형계획법을 사용하고 냉방시스템 사용요금은 TOU와 피크 요금을 포함하여 산정한다. 시뮬레이션을 통해 제안한 제어구간 설정방법을 적용하면 전력 사용에 따른 비용의 절감과 피크 전력 절감을 확인할 수 있다.

• 산업공학
• /
• 제22권1호
• /
• pp.38-43
• /
• 2009

This paper deals with two most important problems, from both practical and theoretical standpoints, arising when building the ships in N different docks. Such docks have become core components of modern ship construction. One problem is to minimize the number of building docks in the shipyard, while the other is to keep the usage rate of resources fed into docks as constant as possible. In this paper the combined problem is formulated as a single-integer programming model. The LP-relaxation of this model is solved by column-generation techniques. Practical applications of this formulation are also discussed.

• 한국건축시공학회지
• /
• 제12권3호
• /
• pp.266-274
• /
• 2012

The annual expenditure on diesel oil and heavy oil in the construction sector is the second largest among all industrial sectors. To meet the government's greenhouse gas reduction targets, the construction sector has until 2020 to cut its emissions by 7.1%. Unlike other high-tech industrial sectors, the construction sector has a fairly limited scope for technological improvements, which hampers its capacity to achieve the reduction target. To reduce emissions, it is necessary to establish an energy and emissions strategy at the project planning stage, and energy use and the resulting emissions must be estimated. This research aims to establish an estimation methodology for greenhouse gas emissions at the planning stage of construction projects. To estimate the project-related emissions, this research indentified the relationship among the types of emissions in a cross-sectional matrix form, and then provided a set of calculation methods for total project related emissions.