• Ocean and Polar Research
• /
• v.41 no.3
• /
• pp.147-157
• /
• 2019

Our study was conducted to examine differences in incubation behavior among breeding sites and the relationship between factor affecting environmental change and incubation behavior of the Black-faced Spoonbill (Platalea minor). We set up the remote sensor cameras at three breeding sites (Mae-do, Namdongji, Guji-do) to observe incubation behavior in Gyeonggi Bay, South Korea from 2015 to 2018. We analyzed effects of breeding year, day of incubation started, day of incubation, the time of incubation exchanges and sex on incubation bout length. Mean incubation bout length of females (Mae-do: $7.19{\pm}0.23$ hours, Namdongji: $6.08{\pm}0.23$ hours, Guji-do: $7.96{\pm}0.30$ hours) was longer than males (Mae-do: $6.14{\pm}0.21$ hours, Namdongji: $5.45{\pm}0.28$ hours, Guji-do: $7.38{\pm}0.29$ hours). Mean incubation bout length was longer in Guji-do than other study sites. Incubation bout length tended to increase with the clutch initiation date. Males incubated their eggs at day time while female did at night time, these tendencies were observed more clearly in Guji-do. The proportion of time spent incubating of females was higher than males. Males' proportion increased as incubation progressed and increased rate in Guji-do was higher than other study sites. Our results showed that incubation rhythm of the Black-faced Spoonbill differed among breeding sites and varied with the environmental cycle.

• Korean Journal of Ornithology
• /
• v.25 no.2
• /
• pp.69-76
• /
• 2018

Sexual dimorphism in birds refers to male-female differences in body size, plumage, color and/or behavior. In general, many seabirds, including the family of Laridae, are monomorphic in plumage-color, which makes the determination of sex difficult in the field because both parents also tend to share a great portion of parental care. The development of an inexpensive sexing tool facilitates understanding the degree of sex-specific parental care in the evolution of the life history. Here, we developed a non-invasive method for the determination of sex using the bill-head morphometric of known captive pairs and applied this tool to wild pairs to document factors underlying male-female parental care during the incubation period of Saunders's gulls (Saundersilarus saundersi). Males exhibited relatively larger bill-head ratios than their mates within naturally formed pairs in captivity, resulting in the determination of sex in12 wild pairs at the nest during the incubation period. Males and females equally shared the incubation role during the daytime, attending the nest at a high rate of 95%. However, the male's proportion of nest attentiveness greatly increased with time towards sunset, presumably reflecting the male duty for nighttime incubation. The present study provides a non-invasive method for the determination of sex in a monomorphic seagull species and highlights how male-female incubation behavior is associated with time of the day, rather than other ecological conditions.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.1
• /
• pp.24-28
• /
• 2012

The electrocatalytic activities and surface roughness of indium-tin-oxide (ITO) electrodes have been investigated after thermal treatment at 100, 150, or $200^{\circ}C$ for 30 min, 2 h, or 8 h. To check electrocatalytic activities, the electrochemical behavior of four electroactive species (p-hydroquinone, $Ru(NH_3){_6}^{3+}$, ferrocenemethanol, and $Fe(CN){_6}^{4-}$) has been measured. The electron transfer rate for p-hydroquinone oxidation and ferrocenemethanol oxidation increases with increasing the incubation temperature and the incubation period of time, but the rate for $Ru(NH_3){_6}^{3+}$ is similar irrespective of the incubation temperature and period because $Ru(NH_3){_6}^{3+}$ undergoes a fast outer-sphere reaction. Overall, the electrocatalytic activities of ITO electrodes increase with increasing the incubation temperature and period. The surface roughness of ITO electrodes increases with increasing the incubation temperature, and the thermal treatment generates many towering pillars as high as several tens of nanometer.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.1
• /
• pp.85-95
• /
• 1997

Behavior of Listeria monocytogenes in Skim milk during fermentation by Lactobacillus bulgaricus YI-2 and Streptococcus lactis FYI-1 were determined. Autoclaved skim milk was inoculated with ca. 10$^{3}$ L. monocytogenes (Strain LM91-1 or LM 96-2) cells/ml, and with 5.0, 1.0, 0.5 or 0.1% of a milk culture of either L. bulgaricus TI-2 or S. lactis FYI-1. Skim milk containing ca. 10$^{3}$ L. monocytogenes was incubated at 37 or 42$\circ $C for 15 h with L. bulgaricus YI-2, and at 21 or 30$\circ $C for 15 h with S. lactis FYI-1. Cultured skim milks were stored at 4$\circ $C in the refrigerater. Samples were plated on Oxford Agar with oxford antimicrobic supplement to enumerate L. monocytogenes and on either modified MRS agar to enumerate lactic acid bacteria. L. monocytogenes survived the 15-h fermentation with S. lactis FYI-1 in all combinations of level of inoculum and temperature of incubation, but inhibition of growth ranged from 94 to 100%. When incubated with over the 1.0% of L. bulgaricus, L. monocytogenes inhibited or disappeared in fermented skim milk from 9 h after incubation. Especially, incubation at 42$\circ $C with 5.0% L. bulgaricus YI-2 as inoculum appeared to be the most effective inhibitory combination for strain LM 91-1, causing 100% inhibition in growth based on maximum papulation attained. In most instances of incubated with L. bulgaricus YI-2, growth of the pathogene appeared to be completely inhibited when the pH dropped below 4.38.

• Computers and Concrete
• /
• v.22 no.3
• /
• pp.291-303
• /
• 2018

As the concept of "sponge city" is proposed, the pervious concrete for permeable pavement has been widely used in pavement construction. This paper aims at investigating the dynamic behavior and energy evolution of pervious concrete under impact loading. The dynamic compression and split tests are performed on pervious concrete by using split Hopkinson pressure bar equipment. The failure criterion on the basis of incubation time concept is used to analyze the dynamic failure. It is demonstrated that the pervious concrete is of a strain rate sensitive material. Under high strain rate loading, the dynamic strength increases while the time to failure approximately decreases linearly as the strain rate increases. The predicted dynamic compressive and split tensile strengths based on the failure criterion are in accordance with the experimental results. The total damage energy is found to increase with the increasing of strain rate, which means that more energy is needed to produce irreversible damage as loading rate increases. The fractal dimensions are observed increases with the increasing of impact loading rate.

• Korean Journal of Materials Research
• /
• v.14 no.7
• /
• pp.477-481
• /
• 2004

High quality polycrystalline silicon is very critical part of the high quality thin film transistor(TFT) for display devices. Metal induced lateral crystallization(MILC) is one of the most successful technologies to crystallize the amorphous silicon at low temperature(below $550^{\circ}C$) and uses conventional and large glass substrate. In this study, we observed that the MILC behavior changed with abrupt variation of the amorphous silicon active pattern width. We explained these phenomena with the novel MILC mechanism model. The 10 nm thick Ni layers were deposited on the glass substrate having various amorphous silicon patterns. Then, we annealed the sample at $550^{\circ}C$ with rapid thermal annealing(RTA) apparatus and measured the crystallized length by optical microscope. When MILC progress from narrow-width-area(the width was $w_2$) to wide-width-area(the width was $w_1$), the MILC rate decreased dramatically and was not changed for several hours(incubation time). Also the incubation time increased as the ratio, $w_1/w_2$, get larger. We can explain these phenomena with the tensile stress that was caused by volume shrinkage due to the phase transformation from amorphous silicon to crystalline silicon.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.4
• /
• pp.109-120
• /
• 2022

This study has incorporated the mechanics-dynamics-emotions (MDE) and two behavioral learning paths to investigate the customers' co-creation behavior in Taiwan. The intuitive path begins with a gamification design that reflects the customers' proactive and innovative behavior; the cognitive path begins with persuasion knowledge remarks based on rational and reactive reasoning. These two paths conclude what forms user co-creation. The study collects data of 505 active social media users in Taiwan and employs structural equation modeling. The empirical findings demonstrate persuasive knowledge and gamification design are significantly associated with self-reference, and in turn, positively associated with co-creation. It indicates that cognitive behavior plays the main role in forming co-creation. Participants are more drawn to co-creation behaviors by the marketing contents that prompt reactive behaviors than proactive ones. Therefore, marketing managers can use appropriate stimuli to enhance co-creation behavior. Companies can design activities related to users, and more accessible for reactive, instead of proactive behavior, i.e., asking for their initiatives. It also suggests that companies' marketing campaigns should involve key opinion leaders matching the product image and the target audience's preferences. The novelty of this study is to introduce a novel augmented MDE framework to extend the "dynamics" into the incubation and implementation stage.

• Journal of Digital Convergence
• /
• v.20 no.3
• /
• pp.251-264
• /
• 2022

The purpose of this study is to present factors and strategies for successful rewarded-crowdfunding of companies. For this, rewarded-crowdfunding based on the extended theory of planned behavior(E-TPB) by adding individual innovation and risk preference as extended variables, in addition to the basic variables of the theory of planned behavior(TPB), including attitude, subjective norm, and perceived behavior control. In addition, the moderating effect of rewarded-crowdfunding experience was confirmed. In addition, the moderating effect of the rewarded-crowdfunding experience was confirmed, and exploratory factor analysis and multiple regression analysis were conducted for questionnaires who were aware of the concept of rewarded-crowdfunding. As a result of testing the hypothesis, it was found that attitude, subjective norm, perceived behavioral control, and risk preference affect the intention to invest in rewarded-crowdfunding. Also, we could find that perceived behavior control and risk preference were moderately influenced by investor who had experience in rewarded-crowdfunding. Based on the research results, it has academic and practical value by presenting the direction of enhancing the success of rewarded-crowdfunding that companies can use as a way to raise funds and boost sales.

• Korean Journal of Ichthyology
• /
• v.27 no.2
• /
• pp.63-70
• /
• 2015

This research is about spawning behavior and morphological development of the eggs and larvae of fringed blenny which lives in Korean sea. It helps to find out the relation between fringed blenny larvae and other stichaeidae larva. Moreover, it is going to use for the basic data of taxonomical research. There were 8 mother fishes (total length 31.8~34.0 cm, average $32.9{\pm}0.21cm$), which were captured from the cost of Sindeok-dong, Yeosu-si, Jeollanam-do from December, 2010. we used trap to capture them. Mother fishes were brought to glass aquarium ($50{\times}30{\times}35cm$) and nurtured with recirculate rearing system. Breeding water temperature was $12.3{\sim}15.8^{\circ}C$ (average $14.1{\pm}2.47$) and salinity was 32.5~33.5‰ (average $33.0{\pm}0.05$‰). fertilized egg was round, opaque demersal egg. The size was 1.81~2.19 mm (average $2.00{\pm}0.27mm$, n=50). Incubation was begun after 271 hours and 30 minutes from fertilization. It started with piercing the egg membrane. prelarvae had length of 8.45~8.84 mm (average $8.65{\pm}0.28mm$, n=5) right after the incubation, and both mouth and anus were opened. After 11 days from the incubation, postlarvae had length of 10.5~11.3 mm (average $10.9{\pm}0.57mm$), and the number of myotomes was increased to 66.

• Economic and Environmental Geology
• /
• v.34 no.4
• /
• pp.345-354
• /
• 2001

The effects on arsenic geochemistry of indigenous microorganisms isolated from an area contaminated with high concentration of arsenic were investigated. Arsenite exerted higher inhibitory effects on the microbes' growth than arsenate. During incubation of the microbes in an arsenate-spiked medium over 24 hours, decrease in microbial growth was observed as arsenate content increased. Arsenate of 150 mM or over apparently inhibited cell growth. However, further incubation for up to 4 days in the high arsenate concentration medium resulted in cell growth, implying that the microorganisms adjusted their biochemical functions to detoxify arsenic and maintain growth. Two types of microbes were observed during 20 hours to reduce arsenate to arsenite in solution through a detoxification mechanism. As well, decrease in the total arsenic content occurred over a 4-day incubation with the same microbes in an arsenate-spiked medium. Therefore it is suggested that microorganisms can influence arsenic speciation in natural settings and this may be applied to efficient bioremediation of arsenic-contaminated sites.