• Journal of Technologic Dentistry
• /
• v.15 no.1
• /
• pp.89-94
• /
• 1993

The tooth size and shape of the permanent incisor teeth have been studied and analyzed about the mean size, S.D, S.E, etcs and percentage from stone model of 100 Korean male and 74 Korean female. The results were as follows. 1. The crown length of permanent incisor teeth were longer in males than in females statistical differences of males and female were not found. 2. the mesio-distal diameters of permanent incisor teeth were larger in males than in females and statistical differences of males and females were found in mandibular lateral incisor and the bigest were max. central incisor, 2nd max. lateral incisor, 3rd man. lateral incisor and the smallest were man. central incisor. 3. The square form in max. central incisor was the greatest percentage and the tapering form in max. lateral incisor and man, incisor was the greatest percentage but tapering form and ovoid form and other shape were found in max. lateral at the same ratio. 4. Concerning the labial developmental groove "midium" was the greatest percentage in the max. central incisor and "low" was the greatest percentage in the man incisor. Concerning the incisal line, straight line was the greatest percentage in the max, incisor and man, incisor and concerning the lingual tubercle "none" was the greatest percentage in the max. incisor. 5. In comparison between left side and right side of incisor, the ratio of same shape ware 22.4%-36.2% but similar or dissimilar cases were more frequently found.

• The Journal of Advanced Prosthodontics
• /
• v.2 no.3
• /
• pp.77-80
• /
• 2010

This article describes esthetic improvement in a patient with a missing maxillary left central incisor. Space analysis of the anterior dentition showed that minor tooth rearrangement was needed. Optimal space distribution for restorations was attained by orthodontic treatment. Through transforming tooth shape with porcelain laminate veneers, the maxillary left lateral incisor was transformed into central incisor and the maxillary left canine into a lateral incisor. The maxillary right central incisor was also restored for esthetic improvement. In a case of changing a tooth shape with porcelain laminate veneers, pre-treatment evaluation, space analysis and diagnostic wax-up are important factors.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.7 no.1
• /
• pp.28-31
• /
• 1998

It is difficult to make an artificial central incisor similar to natural tooth. All ceramic porcelain of this patient is not esthetic, and there is gingival recession due to ill-fitted margin. She has class II division 1 occlusion, so upper central incisors is labioversed. Upper light central incisor is well-characterized but the yellowish brown color of dentin is appeared on the incisal third portion of the central incisor. At 1st trial, the shape and characterization of restoration is good but shade is little dark. At 2nd trial, the shape is better but patient complained on black triangle of mid interdental space, so mesiocervical portion of restoration is overcontoured to compromise the black triangle. Completed metal ceramic crown is in harmony with the adjacent central incisor in aspect of shape, shade, and characterization.

• The Journal of the Korean dental association
• /
• v.12 no.6
• /
• pp.377-379
• /
• 1974

A rare case of two supernumerary teeth on the lingual side of the upper central incisors was observed in a 17 year old korean male. The characteristics were as follow : 1) The site of the occurrence was on the lingual side of upper central incisors. 2) The sizes of both supernumerary teeth were smaller than the normal incisor teeth and quite different from the normal incisors in the tooth shape. 3) A diastema was seen between the maxillary central incisors, and the right incisor exhibited labioversion and left incisor exhibited some mesial inclination.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.1
• /
• pp.25-34
• /
• 2022

This study aimed to investigate a quantitative analysis of the anatomical characteristics of the maxillary supernumerary lateral incisor and its relationship with lateral incisors. Forty-four supernumerary lateral incisors from 43 patients were evaluated for analyzing the position, shape, direction, and relationship between the supernumerary lateral incisor and the normal lateral incisors, using cone-beam computed tomography (CBCT). To compare the size of crown, the mesio-distal width was measured and the Nolla stage was used for evaluating the degree of root development to compare tooth maturity. The supernumerary lateral incisors were in the normal direction at a rate of 90.9%, and in a supplemental shape at a rate of 84.1%. The supernumerary lateral incisor was smaller in size compared to the adjacent lateral incisor and opposite lateral incisor (p < .0001). There was no statistically significant difference in the development stage of root. Based on these results, the supernumerary lateral incisor is similar with the lateral incisor, but has a difference in the size of crown. It is necessary to distinguish the supernumerary lateral incisor from the lateral incisor precisely to reduce clinical complications.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.5 no.1
• /
• pp.1-12
• /
• 1996

The arrangement of anterior artificial teeth is an important factor on the esthetics in the construction of complete dentures and prostheses. During construction of the complete denture the position of maxillary central incisor plays an important role in the arrangements of artificial teeth. The proper position of maxillary central incisor provides natural appearance of anterior teeth and the anterior reference point of occlusal plane. Many methods have been utilized to eatablish the position of the maxillary central incisor in complete denture prosthodontics. However, there has not been provided for the reference for Korean yet. This study was aimed to extablish a guide for the position of the maxillary central inciosr in Koreans. The horizontal and vertical distance between the maxillary central incisor and incisive papilla in Koreans were measured. 1. The mean value of horizontal distance from the maxillary central incisor to the incisive papilla had significant sexual difference, The average distance was 12.648mm in male and 11.385mm in female. 2. The horizontal distance of the incisive papilla had sexual difference, the average distance was 6.182mm in male and 5.622mm in female. 3. The vertical distance from the maxillary central incisor to the incisive papilla had not sexual difference, the average distance was 7.21mm. 4. The crown length of the maxillary central inciosrs from the distal interdental papilla had not sexual difference, the right central incisor was 6.40mm(mean) and the left central inciosr was 6.43mm(mean). 5. The clinical crown length of the maxillary central incisors had not sexual difference, the right central incisor 10.35mm(mean) and the left central incisor was 10.43mm(mean). 6. The shapes of the incisive papilla were pear(68.4%), oval(16%), triangular(6%), irregular(5%), rectangular(4%), and inverted pear(1%) shape.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.1
• /
• pp.85-97
• /
• 1995

The arrangement of anterior artificial teeth is an important factor on the esthetics in the construction of complete denture and prosthesis. During construction of the complete denture the position of maxillary central incisor plays an important role in the arrangements of artificial teeth. The proper position of maxillary central incisor provides natural appearance of anterior teeth and the anterior reference point of occlusal plane. Many methods have been utilized to eatablish the position of the maxillary central incisor in complete denture prosthodontics. However, there has not been provided for the reference for Korean yet. This study was aimed to extablish the position of the maxillary central inciosr in Korean. The horizontal and vertical distance between the maxillary central incisor and incisive papilla in korean were measured. The results were as follows : 1. The mean value of horizontal distance from the maxillary central incisor to the incisive papilla had significant sexual difference, the average distance was 12.648mm (male), 11.385mm(female). 2. The horizontal distance of incisive papilla had sexual difference, the average distance was 6.182mm(male), 5.622mm(female). 3. The vertical distance from the maxillary central incisor to the incisive papilla had not sexual difference, the average distance was 7.21mm. 4. The crown length of maxillary central inciosrs from the distal interdental papilla had not sexual difference, the right central incisor was 6.40mm(mean) and the left central inciosr was 6.43mm(mean). 5. The clinical crown length of the maxillary central incisors had not sexual difference, the right central incisor 10.35mm(mean) and the left central incisor was 10.43mm(mean). 6. The anatomic shapes of incisive papilla were pear(68.4%), oval(16%), triangular(6%), irregular(5%), rectangular(4%), and inverted pear(1%) shape.

• The korean journal of orthodontics
• /
• v.37 no.2 s.121
• /
• pp.159-163
• /
• 2007

Impaction with a severely dilacerated root is seldom reported, especially in the maxillary incisor. It is probably because of the high clinical difficulty associated with bringing the dilacerated tooth into proper position, and the high chance of failure due to ankylosis, external root resolution, and root exposure after orthodontic traction. Even the successful cases may need periodontal surgery to improve the unesthetic gingival shape. However, it has previously been reported that an impacted maxillary central incisor was successfully treated by proper crown exposure and orthodontic traction. This article presents a case of an invertedly impacted maxillary right central incisor with a developing dilacerated root, which was aligned into proper position after orthodontic traction composed of two stages of a closed eruption technique.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.593-604
• /
• 1995

Mandibular incisor crowding is one of the most common features of malocclusion and is interesting characteristic in view of relapse and stability after orthodontic treatment. There are many potential factors in the etiology of lower anterior crowding. The tooth size variation is one of them, but biologic significance for the faciolingual width of the teeth has been overlooked. Peck and Peck reported that persons with ideal mandibular incisor alignment were shown to have incisor with smaller mesiodistal and larger faciolingual dimensions than persons with incisor crowding. On the basis of these findings they suggested MD/FL index as a clinical guideline for the assessment for lower incisor crowding. The present study was undertaken to examine the relationship between mandibular incisor crowding and mandibular incisor dimension, and determine their correlation with arch length discrepancy. 154 dental casts of people from 11 to 17 years of age were made, and were divided into normal group with irregularity index less than of 1, and crowding group with irregularity index greater than 1.The casts were measured and analyzed statistically. The results were as follows. 1. The mean mesiodistal width for mandibular incisor was larger in crowding group, and has significant difference in central inciosr measurement. There are no significant differences in the faciolingul width and MD/FL index. 2. Irregularity index has significant correlation coefficients with mesiodistal width and MD/FL index for mandibular incisor in crowding group, but no correlation with faciolingual width. It also has correlation with maxillary and mandibular arch length discrepancy, total tooth material, mandibular intercanine width, and mandibular inter first premolar width. 3. Upper and lower arch length discrepancy have significant correlation with mesiodistal width of mandibular incisor and overbite, but have no correlation with faciolingual width. Lower arch lenth discrepancy has significant correlation with MD/FL index for mandibular incisor and upper arch length discrepancy has correlation with MD/FL index for mandibular lateral incisor. 4. Significant differences were observed between normal and crowding group for the mandibular arch length discrepancy and overbite.

• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.461-471
• /
• 2006

In order to achieve a satisfactory esthetic result of periodontal surgery or implant in maxillary anterior area, periodontists must be aware of normal alveolar bone anatomy. The purpose of this study was to evaluate the relationship of alveolar bone morphology to tooth shape and form. 78(mean age : 25 yrs) periodontally healthy volunteers participated in this study. Two maxillary central incisor and one lateral incisor were selected to study. With minimal local anesthesia, gutta-percha cone inserted to labial gingival sulcus of selected teeth just after bone sounding with periodontal probe. Metal ball (4mm diameter) attached to palatal fossa of central incisor. Then, periapical radiograph was taken according to long cone paralleling technique. After film scan, labial alveolar bone profile reproduced along interproximal bone and apical ends of gutta-percha cones on computer screen. By utilizing computer program, the distance from height of interproximal bone to the labial bone crest in central incisor-central incisor and central incisor-lateral incisor area was measured and converted to real distance by using vertical length of metal ball on film. After measuring crown length & width of central incisor, the 10 individuals ranked lowest GW/L ratio (crown width/length ratio) and the 10 ranked highest were selected as having a long-narrow(group N), or a short-wide(group W) form of the central incisors. Means of the distance from height of interproximal bone to the labial bone crest of group N, W were calculated and compared by means of independent t-test. The results were as follows: 1. Mean distance from the height of the interproximal bone to the labial bone crest was $3.5{\pm}0.7mm$ between two central incisor, and $2.8{\pm}0.6mm$ between central and lateral incisor. 2. Mean GW/L ratio of group N was 0.57, and group W was 0.8. Mean distance from the height of the interproximal bone to the labial bone crest of group N was higher than group W in both measured area(measurements of group N, W were $3.9{\pm0.2mm$ and $3.5{\pm}0.2mm$ between two central incisor, $3.0{\pm}0.2mm$ and $2.8{\pm}0.2mm$ between central and lateral incisor), but there were no statistically significant differences when the groups were compared. Within the limits of the present study, there was a tendency that subjects with long-narrow teeth have more scalloped alveolar bone profile than subjects with short-wide teeth in upper anterior area, but no statistically significant differences were found.