• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.141-148
• /
• 2002

The purpose of this study is to enhance geo-location accuracy of the image data acquired by the Electro-Optical Camera(EOC) onboard KOMPSAT-1. EOC image data were analyzed to verify geo-location error. It was found that the major contribution was the time mark inaccuracy and attitude knowledge error. This study shows that the geo-location accuracy can be enhanced by modifying the time and attitude data of the ancillary data.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.11a
• /
• pp.891-894
• /
• 2004

This paper proposes an improved image segmentation algorithm by the watershed algorithm based on the local adaptive threshold on local minima search and the fixing threshold on label allocation. The previous watershed algorithm generates the problem of over-segmentation. The over-segmentation makes the boundary in the inaccuracy region by occurring around the object. In order to solve those problems we quantize the input color image by the vector quantization, remove noise and find the gradient image. We sorted local minima applying the local adaptive threshold on local minima search of the input color image. The simulation results show that the proposed algorithm controls over-segmentation and makes the fine boundary around segmented region applying the fixing threshold based on sorted local minima on label allocation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.5
• /
• pp.786-791
• /
• 2015

This paper presents a signal processing method for calibrating an antenna array to solve the inaccuracy of Direction of Arrival(DOA). Using reference data quantifying amplitude and phase distortion levels for each angles, we compensate each radar array’s amplitude and phase distortion. The proposed method is applied to the Bartlett, Capon and MUSIC algorithms, Using 77 GHz Frequency Modulated Continuous Wave(FMCW) Long Range Radar(LRR) signal, we experimentally demonstrate the performance improvement after the proposed compensation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.8
• /
• pp.1349-1355
• /
• 2008

The paper shows the analysis of operating conflict of OCGR trip events and metering errors in the photovoltaic generation, wind generation distributed generation customers with no defect of the distributed generation facilities, which are connected to 22.9kV distribution lines. To analyze problems with metering errors and OCGR fault event, a power quality analyzer and PSIM program were used to test the field and to simulate in Sun-Cheon photovoltaic generation and Seo-Cheon photovoltaic generation customers. With the trial distribution line, the result of analysis was verified to prove with the same situation of the actual field. This paper suggests short term and long term countermeasures of OCGR fault events, analysis of over and shortage of metering errors in distributed generation customers.

• IE interfaces
• /
• v.19 no.4
• /
• pp.342-354
• /
• 2006

The purpose of this thesis is to develop the schemes of supporting estimate for marine engines’ factories which are in a general make-to-order style. The marine engines’ factories currently use the method which depends on the past data and experiences handled by the responsible person, which causes inefficiency and inaccuracy in dealing with a huge amount of data. We apply association rule to solving the problems mentioned above. Critical data for analysis is filtered among materials that have been using actual records of performance so far. Secondly, relation with each part of marine engines through filtered data so that the company can estimate cost promptly and precisely if customers with similar components as requested. By proposed method of study estimate support efficient and supported exactly.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1470-1471
• /
• 2007

The mutual coupling between the current and potential measuring wires makes serious effect on the measurement of the ground impedance. For analyzing the effect of mutual coupling, we compared the ground impedance measured on site with the ground impedance calculated with MATLAB. When the parallel length is 10 [m], the measured ground impedance is similar with the calculated ground impedance. As the parallel length is extended over 10 [m], the error between measured ground impedance and calculated ground impedance is also increased on a large scale. We analyzed the mutual coupling by the frequency and present the inaccuracy of ground impedance quantitatively.

• Transactions of Materials Processing
• /
• v.13 no.6 s.70
• /
• pp.490-496
• /
• 2004

Springback comes from the release of external loads after forming. The control of phenomenon is especially important in the sheet metal forming since there are no other practical methods available to correct the dimensional inaccuracy from springback. Therefore the accurate prediction before the die machining has been a long goal in the field of sheet metal forming. The am of the present study is to enhance the prediction capability of finite element (FE) analysis for the springback phenomenon. For this purpose FE analysis for V-bending has been carried out with the commercial programs, LS-DYNA. The FE analysis results have been validated through the comparison of experimental. The experimental results measured directly by the strain gauge have given the confidence to FEA.

• Journal of Welding and Joining
• /
• v.22 no.3
• /
• pp.45-49
• /
• 2004

Generally, it is used the compensation spring to compensate the inaccuracy of screen image induced by thermal deformation in CRT monitor. Its mechanism is hi-metallic system made of heterogeneous metals and these springs are bonded by laser welding. But laser welding induces a non-uniform temperature distribution, and residual stress is yielded locally by these temperature deviation. Therefore, this study measures the curvature constant to assess functions of the compensation spring of shadow mask with respect to increment temperature and estimates the effect of residual stress on the performance of tri-metal used to compensation spring.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.568-571
• /
• 2005

This paper introduces a correlation-based surface matching algorithm that can be used to reconstruct the surface topography of an object that is scanned from multiple overlapping regions by an AFM. The image matching technique is applied to two neighboring images intentionally overlapped with each other. To account for the inaccuracy of the coarse stage implemented in AFM, all the six axes including the rotational degrees of freedom are successively matched to maximize the correlation coefficient. The results show that the proposed 6-axes image matching method is useful for expanding the measurement range of AFM.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.9
• /
• pp.745-751
• /
• 2016

This paper presents the acceleration and deceleration control of free-form surfaces. A rapid variation of acceleration (or Deceleration) drives the system into a machine shock, resulting in the inaccuracy of the path control of the NURBS curve. The pattern of acceleration control can be established using the curvature of the NURBS curve. The curvature can be easily calculated from the first and second derivative of the NURBS curve used in Taylor's expansion for NURBS interpolation. However, the derivatives are not used in the recursive method for NURBS interpolation. Hence, we attempted the difference-derivatives for calculating the NURBS curvature. Both, Taylor's expansion and the recursive method, are used jointly for controlling the acceleration in the same interpolation algorithm.