• Title/Summary/Keyword: in-band interference

Search Result 730, Processing Time 0.056 seconds

Cell Radius & Guard Band Requirements by Mutual Interference Investigation between Satellite Digital Systems using Gap-filler (Gap-filler를 이용하는 위성 DMB 시스템 간의 상호간섭분석에 의한 보호대역 및 적정 셀 반경 설정)

  • Cha Insuk;Park SungHo;Chang KyungHi;You Heung-Ryeol
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.30 no.6A
    • /
    • pp.499-509
    • /
    • 2005
  • The capacity of Satellite DMB(Digital Multimedia Broadcasting) system is limited mainly by the interference. So, to achieve the expected performance of Satellite DMB system and to minimize the interference from other Satellite DMB system, ACI(Adjacent Channel Interference) should be considered carefully. Satellite DMB system uses the Gap-filler for effective transmission in terrestrial environment, and the Gap-filler can use direct amplification or frequency conversion to satisfy the specific requirements. Therefore, amplified signal causes several effects on interference between System A(Eureka 147 DAB) and System E(ISDB : Integrated services Digital Broadcasting). In this paper, by using the outcome of system-level simulation considering the results of link-level simulation, we analyze the interferences between System A and System E under practical situation based on the exact parameters of ITU-R BO. 1130-4. We also propose the appropriate level of guard band and Cell Radius to optimize system capacity by adapting the spectrum mask given in the spec. and utilizing the interference analysis between System A and System E.

Analysis of the Radio Interference Between Bluetooth and Unlicensed Radio Transmitters in the 2.4GHz Band (블루투스와 2.4GHz 비허가 무선기기와의 전파간섭 분석)

  • 박승근;박진아;조경록
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2001.05a
    • /
    • pp.209-213
    • /
    • 2001
  • In this paper, we analyzed the radio interference between Bluetooth and Wireless LAN/video transmitter in the 2.4GHz band with Monte-Carlo Method. The simulation results show that it is necessary to limit under 10mW of the Bluetooth power to avoid the harmful interference between Bluetooth and Wireless LAN/video transmitter.

  • PDF

Direct-band spread system for neural network with interference signal control (직접 대역 확산 시스템에서 신경망을 이용한 간섭 신호 제어)

  • Cho, Hyun-Seob
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.3
    • /
    • pp.1372-1377
    • /
    • 2013
  • In this Paper, a back propagation neural network learning algorithm based on the complex multilayer perceptron is represented for controling and detecting interference of the received signals in cellular mobile communication system. We proposed neural network adaptive correlator which has fast convergence rate and good performance with combining back propagation neural network and the receiver of cellular. We analyzed and proved that NNAC has lower bit error probability than that of traditional RAKE receiver through results of computer simulation in the presence of the tone and narrow-band interference and the co-channel interference.

Data rate control for suppression of inter-cell interference in TD-SCDMA systems (TD-SCDMA에서 셀간 간섭 억제를 위한 전송속도 제어)

  • Yeo, Woon-Young;Lee, Sang-Yun
    • Proceedings of the IEEK Conference
    • /
    • 2008.06a
    • /
    • pp.265-266
    • /
    • 2008
  • TD-SCDMA combines TDMA and CDMA components to provide more efficient use of radio resources. However, since the same frequency band is used in both the uplink and downlink, serious interference may occur if the base stations are not synchronized. The interference caused by different transmission directions between neighboring cells is called cross-slot interference. This paper proposes a data rate control algorithm that can decrease the cross-slot interference in TD-SCDMA.

  • PDF

Monte-Carlo Based Interference Analysis of 900MHz Passive RFID systems (몬테카를로(Monte-Carlo) 방법을 적용한 수동형 900MHz 대역의 RFID 간섭 분석)

  • Kim Young-Hwan;Eo Pill-Seon;Yang Hoon-Gee;Park Seung-Keun;Kang Bongsoon;Kim Young-Soo;Yook Jong-Gwan
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.43 no.1 s.343
    • /
    • pp.9-18
    • /
    • 2006
  • This paper presents a Monte-Carlo based method to obtain a probability of interference in the 900MHz passive RFID systems. We show an efficient algorithm to calculate not only in-band interference due to unwanted emission of interfering sources for a given emission mask, but out-of-band interference, which depends on the blocking performances of a victim receiver filter. We next apply the proposed method to two types of RFID systems, one is to use simple FHSS and the other to adopt a hybrid use of FHSS and LBT, which senses the channel before transmission. Simulation is first performed with a SEAMCAT. We next make simulation with a MATLAB software which implements SEAMCAT algorithm and show both results from two softwares are similar.

Study on coexistence through interference evaluation between LTE and DTV in the UHF band (UHF대역에서 LTE와 DTV간 간섭 평가를 통한 공유 방안 연구)

  • Kim, Daejung;Chung, Kwangsue
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.4
    • /
    • pp.805-814
    • /
    • 2013
  • According to the shut-down of Analog TV service on 30th. December, 2012, UHF Digital Dividend Band (698~806MHz) could be used for Mobile service such as LTE(Long Term Evolution). In the condition that this band is allocated for LTE service, Interference evaluation between LTE and adjacent DTV service was carried out, using LTE-A system-level simulator which was developed for simulation of IMT-Advanced technology. If LTE service be commercialized in this band, this study proposes the coexistence condition through the interference evaluation such as the effects not only to DTV receiver from LTE terminal but also to LTE base station from DTV transmitter. It is expected that the coexistence condition by these studies will be applied to network algorism for IMT-Advanced system in this band.

Finite Element Analysis of the Contact Stress Characteristics in Scraper Seals (스크레이퍼 실의 접촉응력 특성에 관한 유한요소해석)

  • Kim, Chung-Kyun
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.23 no.6 s.165
    • /
    • pp.895-902
    • /
    • 1999
  • This paper deals with a numerical study of the tribological contact stress distributions of elastomeric lip seals for oscillating shafts when the sealing interference and band width between the lip ease or contact seals and the shaft are present. Using the finite element method the contact stress and band width of scraper seals are analyzed for the sealing interference including some nonlinearities such as geometrical nonlinearity, material nonlinearity and nonlinear contact boundary condition. The FEM results showed that the contact stress concentrated on the contacting lip zone between the contacting edge of lip and the shaft for the increased interference. In double lip scraper seals, ole maximum contact stress of the dust lip, which is used to exclude foreign contaminants is six times higher than that of the primary sealing lip, which is used to contain lubricants.

Numerical Analysis of the Contact Stress Behaviour in Scraper Seals (스크레이퍼 시일의 접촉응력 거동에 관한 수치적 연구)

  • 나윤환;김청균;류병진;유인석
    • Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
    • /
    • 1997.04a
    • /
    • pp.198-203
    • /
    • 1997
  • This paper deals with a numerical study of the tribological contact stress distributions of elastomeric lip seah for oscillating shafts when the sealing interference and band width between the lip edge of contact seals the shaft are present. Using the finite element method, the contact stress and band width of scraper seals rare analyzed for the sealing interference including some nonlinearities such as geometrical nonlinearity, material nonlinearity and nonlinear contact boundary condition. The FEM results showed that the contact stress concentrated on the contacting lip zone between the contacting edge of lip and the shaft for the increased interference. In double lip scraper seals, the maximum contact stress of the dust lip, which is used to exclude foreign contaminants, is six times higher than that of the primary sealing lip, which is used to contain lubricants.

  • PDF

On Frequency Separation among Radio Access Technologies in Heterogeneous Networks (이기종 네트워크를 구성하는 무선접속 기술간 주파수 이격 분석)

  • Lee, Kyoung-Jae;Jo, Han-Shin
    • Journal of Internet Computing and Services
    • /
    • v.16 no.6
    • /
    • pp.1-9
    • /
    • 2015
  • In this paper, we study the coexistence of typical radio access technologies (WiMAX, CDMA, WLAN) in heterogeneous networks. Although the radio accesses employ different frequency band, they can interfere with each other due to out-of- band emission. We compute the minimum adjacent channel interference ratio (ACIR) to satisfy the allowable level of interference, and the resulting minimum frequency separation (guard band) between interfering and victim system. We observe that WiMAX-WLAN coexistence and WiMAX-CDMA coexistence are feasible with at least 20 MHz and 15 MHz guard bands, respectively.

An Analysis of Radio Interference in the Rain Radars (강우 레이더 전파간섭 분석)

  • Kim, Young-Wan
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.1
    • /
    • pp.1-7
    • /
    • 2013
  • The interference among the rain radars and interference in the adjacent wireless station due to the spurious signals from the rain radar were analyzed in this paper. The rain radar measures the rain intensity using S-band signal. The measured data are utilized in forecasting the rainfall. The interference among the rain radars or in the adjacent wireless stations may be caused by the operation with low elevation angle and the high output power. Based on the propagation analysis of S band signal and the deduced interference protection ratio of rain radar, the interference due to the rain radar are analyzed. Also, the radiation spectrum characteristics of a rain radar are deduced from the caused interference effects by the spurious signals of the rain radar. To minimize the interference effects for adjacent wireless stations, it is required to get the rejection characteristics of spurious signals above 105 dB. In viewpoints of interference for rain radars, it is necessary to operate the rain radar with a different PRF and operation time opposite to adjacent rain radars.