• 마이크로전자및패키징학회지
• /
• 제29권4호
• /
• pp.63-69
• /
• 2022

이산화 바나듐은 금속-절연체 전이라는 독특한 특성으로 인해 기초적인 소재 연구 및 산업에의 응용을 위한 연구가 꾸준하게 진행되고 있다. 본 연구에서는 통전활성소결법으로 제조한 이산화 바나듐의 금속-절연체 전이 특성에 마그네슘과 텅스텐 첨가가 미치는 영향을 연구하였으며, 덩어리 시편을 대상으로 그 거동을 고찰하였다. 상용 분말과 통전활성소결법을 이용하여 열처리를 진행하여 제작한 시편의 경우 격자 상수의 변화는 크지 않고 이차상이 존재하였으며, 이로 인해 상전이 온도는 64.2-64.6℃에 분포하는 것으로 나타났다. 반면 불순물의 종류와 함량에 따라 전기전도도는 최대 2.4배 증가하거나 최대 57.4배 감소하는 거동을 나타냈다. 열전도도는 불순물의 첨가에 따라 증가하는 거동을 나타냈으며, 상전이 온도 이전에서는 1.8~2.5 W/m·K, 성전이 온도 이후에서는 1.9~2.8 W/m·K의 값을 가졌다. 이러한 물성 변화는 불순물의 첨가로 인한 전하 나르개 농도의 변화, 불순물의 산란중심, 미세구조의 변화 등이 복합적으로 작용한 결과로 해석할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1977-1979
• /
• 1996

Single-crystaIline silicon diaphgrams and features are fabricated without using an etch stop process. The process involves vertical dry etching, double-sided alignment, followed by wet-chemical etching from the back side. The abvantages of this process are that $5{\sim}50{\mu}m$ diaphgrams and features can be fabricated accurately and inexpensively. In addition, since no impurity-based process is introduced, highly uniform and homogenous properties can be achieved

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.24-27
• /
• 1994

Variations with structural and electrical properties of Yttrium added PZT thin films were observed and measured respectively. Area of rosette was increased by Yttrium added and shapes of hysteresis curves were changed to slim type. $Y^{3+}$ ion substituted $Pb^{2+}$ ion and played the role of doner. Because the creation of space charges was restricted by Yttrium, degradation of remanent polarizations by cumutation of polarization reversals of PZT was protected. But coercive field was increased because of vacancies generated Yttrium added.

• 한국표면공학회지
• /
• 제42권3호
• /
• pp.103-108
• /
• 2009

The effect of Arsenic in copper-sulfate solutions during electrorefining of copper was investigated using scanning electron microscopy, X-ray diffraction and cyclic voltammetry analysis. Electrodeposition was carried out using Arsenic, Antimony and bismuth addition to sulfate electrolytes: 45 g/l $Cu^{2+}$ and 170 g/l $H_2SO_4$. Arsenic in sulfate electrolytes changed the morphology and structure of the copper deposits as compared with those obtained from impurity free solutions. When arsenic was present in the sulfate electrolytes, $Cu-3$As intermetallic phase was formed locally on the deposits.

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.109-112
• /
• 2011

A new derivative of tacrolimus was evaluated for its molecular weight, using LC-MS of the tacrolimus bulk active pharmaceutical ingredient (API) recovered through the purification of crude tacrolimus produced by Streptomyces clavuligerus CKD-1119. In addition, the molecular weight of the new derivative of tacrolimus was found to be at m/z 818 and was identified by $^{13}C$-NMR with peak assignments based on the differences in methyl group location resulting from the chemical structure. The structure of the new derivative, an unknown impurity of tacrolimus, was found to be 18-methyltacrolimus through comparison of the spectral data of the structural differences between ascomycin, tacrolimus, and the new derivative 18-methyltacrolimus.

• 한국세라믹학회지
• /
• 제27권6호
• /
• pp.747-754
• /
• 1990

Aluminum hydrate gels were prepared from the mixtures of bauxite and ammonium sulfate by wet acid process. Optimum conditions for obtaining the maximum yield( 99%) of aluminum hydrates from the same amount of bauxite were confirmed as follows ; 1. Mixing ratio ; addition of 25mole% of ammonium sulfate to 1mole of bauxite. 2. Calcination ; heated at 350℃ for 1hr. 3. Extraction ; leached at 95℃ in 1% H2SO4 for 90min. 4. pH of precipitating solution; slight below 7.0. Amorphous aluminum hydrates were precipitated at the pH lower than 8.5, but the precipitates crystallized to bayerite at the pH was 10. Mean diameter of α-Al2O3 powders which were obtained by calcining the aluminum hydrates was below 0.2㎛, and EDS analysis revealed than SiO2 was it's primary impurity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.64-67
• /
• 1997

Microwave dielectric properties of A1$_2$O$_3$ ceramics resonator were investigated with impurity addition. Increasing the contents of Bi$_2$O$_3$Q-value and Q $\times$ f were increased. In the specimen with the content of Bi$_2$O$_3$(0.3wt%), dielectric constant, quality factor and temperature coefficient of resonant frequency(TCRF, $\tau$$_{f}$) had a good values of 10.76,23,253(at 9.68[GHz]) and -39.09(ppm/$^{\circ}C$), respectively. The TCRF value was decreased with MnO$_2$ and increased with Sm$_2$O$_3$. La$_2$O$_3$.>.

• 한국표면공학회지
• /
• 제55권4호
• /
• pp.202-214
• /
• 2022

Internal connections between device, package and external terminals for connecting packaging and printed circuit board are normally manufactured by electroless Ni-P plating followed by immersion Au plating (ENIG process) to ensure the connection reliability. In this study, a new non-cyanide-based immersion and electroless Au plating solutions using thiomalic acid as a complexing agent and aminoethanethiol as a reducing agent was investigated on different underlayer electroless Ni-P plating layers. As a result, it was confirmed that the deposition behavior and film properties of electroless Au plating are affected by grain size and impurity of the electroless Ni-P film, which is used as the plating underlayer. Au plating on the electroless Ni-P plating film with a dense surface structure showed the highest bonding strength. In addition, the electroless Au plating film on the Ni-P plating film has a smaller particle size exhibited higher bonding strength than that on the large particle size.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1210-1217
• /
• 2023

The assessment of radiation fields in the lithium loop pipes and dump tank during the operation were performed for International Fusion Materials Irradiation Facility - DEMO-Oriented NEutron Source (IFMIF-DONES) in order to obtain the radiation dose-rate maps in the component surroundings. Variance reduction techniques such as weight window mesh (produced with the ADVANTG code) were applied to bring the statistical uncertainty down to a reasonable level. The biological dose was given in the study, and potential shielding optimization is suggested and more thoroughly evaluated. The MCNP Monte Carlo was used to simulate a gamma particle transport for radiation shielding purposes for the current Li Systems' design. In addition, the shielding efficiency was identified for the Impurity Control System components and the dump tank. The analysis reported in this paper takes into account the radiation decay source from and activated corrosion products (ACPs), which is created by d-Li interaction. As a consequence, the radiation (resulting from ACPs and Be-7) shielding calculations have been carried out for safety considerations.

• 대한전자공학회논문지
• /
• 제14권1호
• /
• pp.5-14
• /
• 1977

공기중의 열처리에 의하여 상온에서 낮은 저항을 갖는 PTC 써미스터를 제작했다. 재현성을 높이기 위해 BaTiO3에 Al2O3, SiO2 및 TiO2를 첨가 했으며, 불순물로서 Sb2O3를 첨가했다. 시편은 공기 중에서 1,200℃∼1,380℃로서 가열되었으며, Sb2O3첨가량에 대한 저항관계를 조사했다. 이 시편들은 공기중의 열처리에서도 재현성이 좋았다. 연구된 시편은 3.75mole% Al2O3, 1.25mole% SiO2, 2.25mole% TiO2 및 0.16∼0.25wt% Sb2O3를 BaTiO3에 첨가하여 만들었으며 저항값은 14∼300ohm이었다.