• 소음진동
• /
• 제10권4호
• /
• pp.679-685
• /
• 2000

A procedure is presented for calculating the magnitude and shape of impact pulses in a vibro-impact system when an arbitrary input force is applied to a point in the system. The procedure utilizes the condition that the displacements of two contacting point in the primary and secondary system are the same during a contacting period. The displacements of those points are calculated numerically through the convolution integral which involve the impulse response functions and applied forces. The validity of the calculation procedure is demonstrated by using it to calculated the impact forces of a simple system where a theoretical solution is known and also of systems for which other researchers have published results. The agreement between the results derived by the numerical method and the theoretical and also some published results is good.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1222-1227
• /
• 1990

The problem of identification of continuous systems is considered when both the discrete input and output measurements are contaminated by white noises. Using a predesigned digital low-pass filter, a discrete-time estimation model is constructed easily without direct approximations of system signal derivatives from sampled data. If the pass-band of the filter is designed so that it includes the main frequencies of both the system input and output signals in some range, the noise effects are sufficiently reduced, accurate estimates can be obtained by least squares(LS) algorithm in the presence of low measurement noises. Two classes of filters(infinite impulse response(IIR) filter and finite impulse response(FIR) filter) are employed. The former requires less computational burden and memory than the latter while the latter is suitable for the bias compensated least squares(BCLS) method, which compensates the bias of the LS estimate by the estimates of the input-output noise variances and thus yields unbiased estimates in the presence of high noises.

• 한국산업융합학회 논문집
• /
• 제6권4호
• /
• pp.333-337
• /
• 2003

This paper proposed new techniques of rotor position detection for 8/6 pole Switched Reluctance Motor(SRM). This technique is very simple and easy to find out rotor position. The main idea uses the impulse responses which have different values between aligned and unaligned rotor position. In order to obtain the informations of the rotor position, the impulse applied to the unenergized phases and their responses are analyzed to control the speed of SRM without shaft sensor. Experimental results verify the feasibility of the proposed method.

• 소음진동
• /
• 제10권5호
• /
• pp.800-805
• /
• 2000

To determine the modal matrix and modal frequency of engine mount system, we most solve so-called eigen-value problem. However eigen-value problem of engine mount system with hydraulic mount can not be solved by general eigne-analysis algorithm because the properties of hydraulic mount vary with frequency. so in this paper the method for modal analysis of rigid body motions of an engine supported by hydraulic mount is proposed. Natural frequencies and mode shapes of this nonlinear system are obtained by using complex exponential method and Laplace transformation method. In time domain, impulse response functions are calculated by (two-sided) discrete inverse Fourier Transformation of forced frequency response functions achieved by Laplace transformation of the differential equation of motion. Considering the fact that frequency response functions synthesized by modal parameters form proposed method are in good agreement with original FRFs, it is proved that the proposed method is very efficient and useful for the analysis of eigne-value problem of hydraulic engine mount system.

• ETRI Journal
• /
• 제46권3호
• /
• pp.392-403
• /
• 2024

Even though generalized frequency division multiplexing is an alternative waveform method expected to replace the orthogonal frequency division multiplexing in the future, its implementation must alleviate channel effects. Least-squares (LS), a low-complexity channel estimation technique, could be improved by using the discrete Fourier transform (DFT) without increasing complexity. Unlike the usage of the LS method, the DFT-based method requires the receiver to know the channel impulse response (CIR) length, which is unknown. This study introduces a simple, yet effective, CIR length estimator by utilizing LS estimation. As the cyclic prefix (CP) length is commonly set to be longer than the CIR length, it is possible to search through the first samples if CP is larger than a threshold set using the remaining samples. An adaptive scale is also designed to lower the error probability of the estimation, and a simple signal-to-interference-noise ratio estimation is also proposed by utilizing a sparse preamble to support the use of the scale. A software simulation is used to show the ability of the proposed system to estimate the CIR length. Due to shorter CIR length of rural area, the performance is slightly poorer compared to urban environment. Nevertheless, satisfactory performance is shown for both environments.

• 한국음향학회지
• /
• 제20권1호
• /
• pp.13-20
• /
• 2001

음향 에코우제거기나 소음제어와 같은 임펄스 응답이 긴 디지털 필터를 이용하여 필터링을 할 경우 수렴속도가 느리고 계산시간이 많이 걸린다. 이러한 기존의 필터링에서 생기는 계산시간이나 수렴속도 문제를 개선하기 위해서 서브밴드 필터링과 멀티레이트 신호처리 기술이 개발되었다. 모든 시스템의 전달함수는 interpolator와 임펄스 응답사이에 임의 수만큼의 0이 들어있는 sparse 임펄스 응답을 갖는 서브필터를 직렬로 연결한 구조로 표현할 수 있다. 이 경우에 interpolator는 Hadamard 행렬로 표현되고 저역통과필터 특성을 갖는 원형필터를 균일하게 이동시킨 것과 같다. 그래서 입력신호를 Hadamard 변환을 이용하여 각 서브대역으로 분할하고 decimation을 하여 샘플링 레이트를 줄이는 멀티레이트기술이 음향 함수 모델링이나 잡음제거에 응용할 수 있다. 본 논문에서는 decimation으로 생기는 에리어싱을 제거하고 수렴속도를 향상시키기 위해서 입력 신호를 트리구조를 갖는 필터뱅크를 이용하여 비균일한 서브대역으로 분할, 그리고 decimation을 하여 샘플링레이트를 변환하고 각 서브대역에서 계수를 갱신한 후 이 계수를 전대역으로 Hadamard 변환을 이용하여 변환하는 비균일한 대역폭을 갖는 delayless 필터 구조를 제안하고 이 구조를 컴퓨터 시뮬레이션을 통하여 성능을 검증한다.

• 전기전자학회논문지
• /
• 제26권1호
• /
• pp.36-42
• /
• 2022

본 연구에서는 전기 신호 경로로서의 인체 채널에 대해 임펄스 응답 신호를 이용한 분석 결과를 제시한다. 최근, 인체 통신(human body communications)은 착용형 또는 임플란트형 센서 디바이스 간의 통신 방법으로 인체 영역 통신망(wireless body area networks)을 구성하는 효과적인 접근방법으로 제시되고 있다. 인체 통신 시스템 설계에 중요한 지침인 인체 채널 특성 제공을 위해, 자체 제작한 채널 응답측정장치를 사용하고 용량성 커플링(capacitive coupling) 특성에 적합한 실험환경을 구축하여 측정을 수행하고 그 분석한 결과를 제시한다. 측정 신호에 대한 신호처리 과정으로 임펄스 응답을 효과적으로 추출하여, 0 MHz에서 100 MHz 사이의 주파수 분석을 통해 평균 경로 손실 약 46.8 dB를 제시하고 주파수별 경로 손실 특성을 확인할 수 있다. 또한, 본 연구는 인체 통신 시스템의 수신기 신호 대 잡음비(signal-to-noise ratio) 예측을 위한 수신기 필터의 커패시터와 저항값 변화에 따른 전체 측정 주파수와 기저 대역 신호의 검출 성능 결정에 영향을 주는 3 MHz 이하 대역에서의 상대적인 잡음 전력을 제시하였다.

• 한국해양공학회지
• /
• 제20권5호
• /
• pp.36-41
• /
• 2006

The main object of this study is to develop an accurate and convenient method for the response analysis of offshore structures in real sea states. A numerical procedure is described for predicting the motion responses and tension variations of the ISSC TLP in multi-directional irregular waves. The developed numerical approach in the frequency domain is based on acombination of the three dimensional source distribution method, the dynamic response analysis method, and the spectral analysis method. Frequency domain analysis in the multi-directional irregular waves is expanded to a time domain analysis by using a convolution integral after obtaining the impulse response by Fourier transformation. The results of the comparison between responses in the frequency and time domain confirmed the validity of the proposed approach.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 가을 학술발표회 논문집
• /
• pp.42-49
• /
• 1997

In this paper, the method for soil-structure interaction analyses in the time domain is proposed. The far field soil region which is the outside of the artificial boundary is modeled by using explicit frequency-dependent two dimensional infinite elements which can include multiple wave components propagating into the unbounded medium. Since the dynamic stiffness matrix of the far field soil region using the proposed infinite elements is obtained explicitly in terms of exciting frequencies and constants in the frequency domain, the matrix can be easily transformed into the displacement unit-impulse response matrix, which corresponds to a convolution integral of it in the time domain. To verify the proposed method for soil-structure interaction analyses in the time domain, the displacement responses due to an impulse load on the surface of a soil layer with the rigid bed rock are compared with those obtained by the method in the frequency domain and those by models with extend finite element meshes. Good agreements have been found between them.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 학술발표대회 논문집 제17권 2호
• /
• pp.3.2-6
• /
• 1998

본 논문에서는 실측된 실내 충격 응답을 모델링하여 실내 잔향 필터 설계를 시도하였다. 급강하법(steepest descent method)을 이용하여 측정된 실내 충격 응답을 4개의 콤 필터(comb filter)와 2개의 올패스 필터(allpass filter)로 이루어진 잔향 필터로 모델링하여, 잔향 필터의 계수를 결정하였다.