• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.95-98
• /
• 2000

Evaluation of the acoustic nasal geometry is obtained by estimating impulse response due to the nasal geometry. Conventionally, the Wiener filtering method proposed by Hunt has been used for estimating impulse response. In this paper, we proposed the Weiner filtering method using noise-to-signal power ratio for estimating impulse response. In result, the proposed method in this paper is effective than the conventional method.

• International Journal of Control, Automation, and Systems
• /
• 제2권3호
• /
• pp.384-389
• /
• 2004

Recently a method of model reduction for discrete systems has been proposed in the literature based on a new impulse response Gramian. In this method, the system matrix$A_r$ of a reduced model is computed by approximating the reduced-order impulse response Gramian. The remaining matrices $b_r$ and $c_r$ are obtained so that various initial Markov parameters and time-moments of the original system are preserved in the reduced model. In this paper a different approach is presented based on the recursive relationship among the impulse response Gramians.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.23-27
• /
• 2007

Many trials have been used to model room impulse responses, all attempting to provide efficient representations of room acoustics. The traditional model designs for room impulse response seem to fail in accuracy, controllability, or computational efficiency. In time domain, a room impulse response is generally considered as the combination of three parts having different acoustic characteristics, initial time delay, early reflection, and late reverberation. This paper introduces new learning hybrid model for the room impulse response. In this proposed model, those three parts are modeled using different models with learning algorithms that determine the length or boundary of each model in the hybrid model. By the simulation with measured room impulse responses, it was examined that the performance of proposed model shows the best efficiency in views of both the parameter numbers and modeling error.

• 소음진동
• /
• 제4권3호
• /
• pp.337-343
• /
• 1994

A method of the leak detection from the pipe system by using accelerometer is proposed. The signal detected from accelerometer is proved experimentally to be a dispersive wave. Based on the experiments, a method using the narrow band pass filter and the unit impulse response function is analyzed. The method uses the characteristics of the unit impulse response function, that the function is available evenin the narrow band signal because, unlike the cross correlation, it is normalized by the auto spectrum. The accelerometer is quite easier to use than the hydrophone in adapting to the pipe system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.683-685
• /
• 1999

As a method of obtaining pulse transfer function. transfer function of discrete-time from input-output data, there are method of obtaining unknown parameter of pulse transfer function from estimated impulse response before(1-3). There is no need to approximate to several meanings because of not being established algebraical relations between impulse response for estimation error and parameter of transfer function exactly. In this paper, I inquire the method[4] of obtaining the optimal pulse transfer function as a meaning of Hankel norm approximation from impulse response data and examine estimated property as computer simulation from this method.

• 한국소음진동공학회논문집
• /
• 제12권10호
• /
• pp.792-798
• /
• 2002

The spectrum of impulse response signal from an impulse hammer testing is widely used to obtain frequency response function (FRF) of the structure. However the FRFs obtained from impact hammer testing have not only leakage errors but also finite record length errors when the record length for the signal processing is not sufficiently long. The errors cannot be removed with the conventional signal analyzer which treats the signals as if they are always steady and periodic. Since the response signals generated by the impact hammer are transient and have damping, they are undoubtedly non-periodic. It is inevitable that the signals be acquired for limited recording time, which causes the finite record length error and the leakage error. In this paper, the errors in the frequency response function of multi degree of freedom system are formulated theoretically. And the method to remove these errors is also suggested. This method is based on the optimization technique. A numerical example of 3-dof model shows the validity of the proposed method.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권1호
• /
• pp.56-60
• /
• 2005

In the power-line communication(PLC) systems, the power line is a wired medium. However, the power line channel has the multi-path fading characteristics like the wireless channel in the wireless communication systems because it has the signal reflection and divergence by the impedance mismatching between many branch lines and loads. So the analysis of the multi-path characteristics is very important, and it has been doing by the several measurement methods for the impulse response between the transmitter and the receiver. PN sequence method has originally been used as a wideband impulse response measurement mettled for wireless channel, but it is recently being applied to not only the wireless channel but also the wired channel like the power line channel. This method is more useful and effective for the long distance communication channel like the medium voltage power distribution line with the multi-paths[1]. In this thesis, we have measured impulse response for the medium voltage power distribution line channel by the wideband measurement method using PN sequence, analytically studied the measured data and presented the results.

• 대한전자공학회논문지TC
• /
• 제42권12호
• /
• pp.165-170
• /
• 2005

본 논문은 임펄스 전파 채널 측정에 있어서, 사용된 초광대역 (Ultra Wideband) 안테나가 시간 및 주파수 영역에서 임펄스 전파 채널에 미치는 영향을 기술하고자 한다. 임펄스 전파 채널에서의 초광대역 안테나의 영향을 해석하기 위해, 우선 초광대역 안테나의 임펄스 응답을 구하였고, 이를 이용하여 초광대역 안테나의 영향이 배제된 임펄스 전파 채널 해석 방법을 제시하였다. 이론적 증명을 위해, 임펄스 전파 채널 측정을 위한 변형된 초광대역 코니컬 모노폴 안테나를 설계, 제작하였고 무반향 반사실에서의 전달 특성을 측정하여 초광대역 안테나의 임펄스 응답을 도출하였다. 또한, 임펄스 전파 채널 상에서의 초광대역 안테나에 대한 영향을 해석하기 위해, 무반향 반사실에서 다중경로 환경을 만들어 주파수 영역에서 벡터 회로망 분석기를 사용하여 전달 특성을 측정하였다. 주파수 영역에서 측정된 데이터는 신호 처리 과정을 거쳐 시간 영역의 신호로 변환하였다. 측정된 결과로부터, 안테나의 특성이 임펄스 전파 채널에 영향을 미침을 확인하였다. 또한, 초광대역 안테나의 임펄스 응답을 사용하여 순수하게 다중경로 채널에 의한 임펄스 응답을 구하였다.

• Journal of Electrical Engineering and Technology
• /
• 제6권3호
• /
• pp.397-401
• /
• 2011

The response of lightning impulse voltage was explored in dielectric liquids employing hydrodynamic modeling with three charge carriers using the finite element method. To understand the physical behavior of discharge phenomena in dielectric liquids, the response of step voltage has been extensively studied recently using numerical techniques. That of lightning impulse voltage, however, has rarely been investigated in technical literature. Therefore, in this paper, we tested impulse response with a tip-sphere electrode which is explained in IEC standard #60897 in detail. Electric field-dependent molecular ionization is a common term for the breakdown process, so two ionization factors were tested and compared for selecting a suitable coefficient with the lightning impulse voltage. To stabilize our numerical setup, the artificial diffusion technique was adopted, and finer mesh segmentation was generated along with the axial axis. We found that the velocity from the numerical result agrees with that from the experimental result on lightning impulse breakdown testing in the literature.

• 한국ITS학회 논문지
• /
• 제4권1호
• /
• pp.57-62
• /
• 2005

본 논문에서는 OFDM 시스템에서 임펄스 신호를 이용한 채널 추정방법을 제안한다. 채널 응답을 추정하기 위해 주파수 영역에서 새로운 프리엠블을 사용하여 시간영역에서 16샘플 간격으로 4개의 구간으로 나누고, 각 구간에서 임펄스 응답이 나오도록 한다. 이 임펄스 신호들은 한 OFDM 심볼동안에 전송한다. 수신단에서, 각 구간별 임펄스 신호를 더하여 평균을 취한다. 평균된 임펄스 응답에서 최대지연 이후 데이터는 잡음이기 때문에 zero padding을 하여 제거하고 FFT를 수행하여 채널 추정 응답을 찾아낸다. 제안된 채널 추정방법을 이용한 WLAN 시스템의 BER성능은 IEEE802.11a에서 사용하는 긴 훈련신호(long preamble)를 이용한 기존의 채널 추정 방법에 비해 약 3dB 성능 향상을 보인다.